METRIA P Series Spoon Balance User Manual
- June 16, 2024
- METRIA
Table of Contents
METRIA P Series Spoon Balance
Product Information
- Specifications
- Product Name: METRIA Spoon balance, series P
- Brand: METRIC
Product Usage Instructions
- Operation:
- To turn on the spoon balance, press the ON/OFF switch located on the device. Ensure that the device is in a horizontal position.
- After turning on the device, it will perform a self-test. Once the display shows “0.0g” or “0.00 gr”, the scale is ready to be used.
- Note: It is crucial to keep the spoon horizontal while using the device.
- Tare function:
- The TARE button serves two purposes: zero correction and tare function. To perform the zero correction, follow these steps:
- Ensure that the spoon is empty and in a horizontal position.
- Press and hold the TARE button until “0” appears on the screen.
- Lock function:
- The lock function allows you to lock and display the weighted value. Follow these steps:
- When the display is static, press the HOLD button to lock the value.
- To unlock the display, press the HOLD button again.
- Changing the weight unit:
- You can change the weight unit by following these steps:
- Press the TARE minus button located on the scoop.
- Continue pressing the TARE minus button until “zero” is displayed on the screen.
- Use the MODE button to cycle through the available weighing units (g, oz, gn, ml, etc…).
- FAQ
- Q: How do I replace the batteries?
- A: Batteries should only be replaced in a safe area. Please refer to the user manual for detailed instructions on replacing the batteries.
- Q: How long does the scale stay on before turning off?
- A: The scale turns off automatically after 30 seconds of inactivity.
PRODUCT OVERVIEW
INSTALLATION INSTRUCTION
- Contains:
- Spoon balance
- Operation:
- Turn the scale on by pressing the ON/OFF switch, always in a horizontal position.
- The device operates a self-test.
- When the display shows: 0.0g or 0.00 gr, the scale is ready to use.
- The scale turns off after 30 seconds of inactivity.
- When placing containers or bags Into the scoop, press the button “TARE” minus until zero is back on the display.
- Tare function:
- The “TARE” button is also used to make the Zero correction, with the spoon empty and in a horizontal position, press the button until “0” appears on the screen
- NOTE: Is very important to keep the spoon horizontal while is been used
- Lock function
- When the display is static, press the button “HOLD” to lock and display the weighed value press it again to unlock the display.
- Change the weight unit
- Use the “MODE” button to swap the weighing unit (g, oz, gn, ml, etc…) Batteries should only be replaced in a safe area.
Technical data
Important note
Important note for electronic devices sold in Spain
- Instructions on environmental protection and disposal of electrical appliancestronics
- Electrical and electronic devices marked with this symbol cannot be disposed of as urban waste.
- Following Directive 2012/19/EU, European Union users of electrical and electronic devices, have the possibility of returning their WEEE for disposal to the dealer or equipment manufacturer after purchasing one new.
- Illegal disposal of electrical and electronic devices is punishable by an administrative fine.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>