METRIA TIME-W24-001 24h Clock Timer User Manual
- June 15, 2024
- METRIA
Table of Contents
METRIA TIME-W24-001 24h Clock Timer
The 24-hour Clock (timer), reference TIME-W24-001, has a Clock function (12/24 hours), Stopwatch function, and Countdown timer function.
NOTE:
One LR44H button battery is included. Remove the protective paper from inside
the battery compartment before using it for the first time.
12/24 hour setting
Select the 12/24 system using the red selector on the side.
Time setting
- Press the MODE button to enter CLOCK mode.
- Adjust the hours, minutes, and seconds employing the buttons H, M, and S respectively. By pressing each key for more than 2 seconds, the advance is faster.
Timer Operation
- Press the MODE button to enter TIMER mode, 00:00:00 appears on the display.
- Press the START button to start timing (COUNT-UP mode)
- To stop it, press the STOP button.
- Press the RESET button to reset the values.
Countdown timer operation
- Press the MODE button to enter TIMER mode, 00:00:00 appears on the display.
- Set the desired countdown time using buttons H, M, and S respectively.
- Press the START button to start the countdown.
- If you want to pause the countdown, press the START button again.
- To stop it, press the STOP button.
- Press the RESET button to reset the values.
Memory function
When the time is up, the last entered time record can be accessed by pressing the MEMORY button.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>