ZALMAN CNPS20X CPU Cooler User Manual

June 4, 2024
ZALMAN

ZALMAN CNPS20X CPU Cooler

ZALMAN-CNPS20X-CPU-Cooler-PRODUCT

Precautions

  • Avoid tempering with objects or hands into the fan while it is in operation to prevent product damage and injuries.
  • Do not eat the thermal grease, and avoid its contact with skin and eyes. If contact is made with skin, wash off with water. If irritation persists, seek medical attention.
  • To prevent possible injuries, gloves must be worn while handling this product.
  • Excessive force exerted on the fan may cause damage to the fan and/or system.
  • Use and keep product away from reach of children.
  • Check the components list and condition of the product before installation. If any problem is found, contact the retailer to obtain a replacement.
  • Our company assumes no responsibility for any problem that occurs due to the use of the product for purposes other than its designated purposes and/or the carelessness of the consumer.
  • Zalman Tech Co., Ltd. Is not responsible for any damages due to overclocking CPU such as, CPU and system components.
  • During transportation of the system, the cooler must be removed. Zalman Tech Co., Ltd. is not responsible for any damages that occur during the transport of a system.
  • Product design and specifications may be changed to improve quality and performance without notice.

TECHNICAL

ZALMAN-CNPS20X-CPU-Cooler-FIG1

INTEL, AMD Backplate

ZALMAN-CNPS20X-CPU-Cooler-FIG2

115X

ZALMAN-CNPS20X-CPU-Cooler-FIG4

AM3

ZALMAN-CNPS20X-CPU-Cooler-FIG5

AM4ZALMAN-CNPS20X-CPU-Cooler-FIG6

INTEL, AMD Loading Block

Intel Users

ZALMAN-CNPS20X-CPU-Cooler-FIG9 ZALMAN-CNPS20X-
CPU-Cooler-FIG16

LGA2066 / 2011-V3 / 2011

ZALMAN-CNPS20X-CPU-Cooler-FIG18 ZALMAN-CNPS20X-
CPU-Cooler-FIG23 ZALMAN-CNPS20X-CPU-Cooler-
FIG24

AMD Users

AM3 / AM4

ZALMAN-CNPS20X-CPU-Cooler-FIG25 ZALMAN-CNPS20X-
CPU-Cooler-FIG26 ZALMAN-CNPS20X-CPU-Cooler-
FIG31 ZALMAN-CNPS20X-CPU-Cooler-FIG32

Cable Connection

ZALMAN-CNPS20X-CPU-Cooler-FIG33 ZALMAN-CNPS20X-
CPU-Cooler-FIG34

Fan Specifications

  • Dimensions : 140 x 140 x 26(H)mm
  • Speed : 800 ~ 1,500 ±10% RPM
  • Max Noise Level : 29 dB(A) ±10%
  • Bearing Type : FDB (Fluid Dynamic Bearing)
  • Max Airflow : 61 CFM ±10%
  • Pin Connector : 4-Pin (PWM), 3-Pin (Addressable)
  • Rated Voltage : 5~12 V DC

Certification

This mark, designed by Zalman, indicates product compliance with the European Union’s RoHS (Restriction of Hazardous Substances) Directive.

Disposal of Old Electrical & Electronic Equipment
(Applicable in the European Union and other European countries with separate collection systems)

www.zalman.com

Zalman Tech Co.,Ltd.

2612, Obiztower, 126, Beolmal-ro, Dongan-gu, Anyang-si yeonggi-do, 14057,

Korea

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals