THE HOME DEPOT 4/6 Inch Recessed Downlight Installation Guide

4/6 INCH RECESSED DOWNLIGHT
INSTALLATION INSTRUCTIONS

4/6 Inch Recessed Downlight

Pay attention to security. Please read those operating manuals and keep them for future use before installation. The company will not take responsibility if you are not operating according to the instructions.

Important safety operating instructions

1. Please read all warnings and instructions labels which is included in the box and fixture to avoid personal injury, property damage caused by fire, electric shock, components falling, cuts, bruises, death, and other dangers.
2. Please follow these general precautions before installing, maintaining, or fixing.
3. Commercial installation, service, and maintenance of luminaires should be performed by a qualified licensed electrician.
4. For residential installation: if you are unsure about the installation or maintenance of the luminaires, please consult a qualified licensed electrician and check your local electrical code.
5. Don’t let the luminaires contact the surface of combustible materials.
6. This fixture should not be used in areas with limited ventilation or high ambient temperature.

Warning: Risk of electrical shock

1. Turn off electrical power at fuse or circuit breaker box before wiring fixture to the power supply
2. Make sure the fixture connects to the right voltage. Connect the fixture with 120V 50/60Hz power supply.
3. Make sure all electrical and grounded connections in accordance with the National Electrical Code and applicable local code requirements.

Caution: Risk of product damage

1. Never connect components under load
2. Do not hang or support these fixtures that will cut the outer jacket or damage wire insulation.
3. Unless individual product specifications deem, otherwise: Do not exceed fixtures’ maximum ambient temperature
4. Electrostatic Discharge can damage LED fixtures. Personal grounding equipment must be worn during installing or maintaining.
5. Do not touch individual electrical components as this can cause electrostatic discharge, shorten lamp life, or alter performance.

Caution: Risk of injury

1. Wear gloves and safety glasses at all times when moving luminaire from a carton, installing, servicing, or performing maintenance.
2. Avoid direct eye exposure to the light source while it is on. Or this may cause irreparable damage to the eyes.

Caution: Risk of burn

1. Allow the fixture to cool before the touch.
2. Do not exceed the maximum wattage marked on the luminaire label.

Make sure that all parts are ready before installing the light and then compare the parts with the packing list and the hardware catalog. If there is any missing or damaged, please do not assemble the lamp. The time of installation the light is probably 5 minutes.
Attention: lights must to be installed by an experienced household wire installer or a qualified electrician, Electrical system and the electrical connection method of lamps and lanterns must conform to the national electrical standards and specification requirements of the local architecture.

Product graphics

Function : 4″ 5CCT adjustable
Switch the CCT to adjust the color
Temperature (2700K-3000K-3500K-4000K-5000K )

1. Voltage: 120V/AC;
2. Operating frequency: 50/60Hz;
3. Working temp.: -20 ℃—45 ℃
4. Installation height: 1-4m,Standard height:2.5m.

Function : 6″ 5CCT adjustable
Switch the CCT to adjust the color
Temperature (2700K-3000K-3500K-4000K-5000K )

1. Voltage: 120V/AC;
2. Operating frequency: 50/60Hz;
3. Working temp.: -20 ℃—45 ℃
4. Installation height: 1-4m,Standard height:2.5m.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>