ZALMAN S4 Plus, S4 Plus TG Mid Tower Case User Manual

: June 4, 2024
: ZALMAN

ZALMAN S4 Plus, S4 Plus TG Mid Tower Case User Manual

Precautions

Read this manual carefully before installing.
Check the product and components before installing. If you find any abnormality, contact the location where you purchased the product for a replacement or refund.
Wear gloves to prevent accidents when installing the product.
Severe damage may occur when mounting the system, so do not apply excessive force.
Connecting the cable incorrectly may cause a fire due to a short circuit. Make sure to refer to the manual when connecting the cable.
Be careful not to block the ventilation hole of the product when using the system.
Avoid locations with direct sunlight, water, moisture, oil, and excessive dust.
Store and use the product in a well-ventilated location.
Do not wipe the surface of the product using chemicals. (organic solvents such as alcohol or acetone)
Do not insert your hand or other object into the product during operation, as this may injure your hand or damage the object.
Store and use the product out of children’s reach.
Our company assumes no responsibility for any problem that occurs due to the use of the product for purposes other than its designated purposes and/or the carelessness of the consumer.
The exterior design and specifications of the product are subject to change without prior notice to consumers for quality improvement.

Technical characteristics

Model	S4 PLUS	S4 PLUS TG
Case Form Factor	ATX Mid-Tower
Dimensions	400(D) x 206(W) x 458(H)mm
Weight	3.7kg	4.9kg
Case Materials	Plastic, Steel	Plastic, Steel, Tempered Glass
Motherboard Support	ATX / mATX / Mini-ITX
Maximum VGA Length	315mm (Without fan, Radiator)
Maximum CPU Cooler Height	160mm
Maximum PSU Length	180mm
PCI Expansion Slots	7
Drive Bays	2 x 3.5”(1 x Combo) / 1 x 2.5” SSD
Fan Support	Top	2 x 120mm
Front	3 x 120mm
Rear	1 x 120mm
Bottom	2 x 120mm
Pre-Installed Fan(s)	Front	2 x 120mm (RGB)
Rear	1 x 120mm (RGB)
Radiator Support	Front	120mm / 240mm
Rear	120mm
I/O Ports	1 x Headphone, 1 x Mic, 2 x USB 2.0,

1 x USB 3.0, Reset Button, Power Button

Technical characteristics

Components

Manual
buzzer
PCI of the slot cover x 2
cable ties x 5
Thumb screw x 2
USB rubber cover x 3
HDD screws x 8
SSD / MB Screws x 22
PSU / VGA Screws x 8
Motherboard stand-offs x 6
fan screws x 2
HDD Slide Screw sy x 2
media rubber cover x 2

I/O Ports

| Part| #| Part| #| Part| #| Part

---|---|---|---|---|---|---|---
⑥| Power Button| ⓑ| Reset Button| ⓒ| HDD/ Power LED| ⓓ| Microphone Jack
⑥| Headphone Jack| ⓕ| USB 2.0 Ports| ⑨| USB 3.0 Port| |

Removing the side panels

Acrylic Panel
Steel Panel

Removing the front panel

Mounting the motherboard

Motherboard size

ATX
mATX
Mini-ITX

Mounting the PSU

Mounting the PCI-E(VGA) card

Mounting

Mounting the 3.5″ and 2.5″ SSD / HDD

HDD

HDD Screws

SSD

SSD / MB Screws

Mounting

Mounting the 2.5″ SSD / HDD

Mounting

Mounting the radiator

Mounting the front radiator
Radiator 120mm / 240mm
Mounting the rear radiator
Radiator 120mm

Pre-installed fan(s)

Pre-Installed rear 120mm RGB fan
Pre-Installed front 2 x 120mm RGB fan
$Pre-installed fan$s$$

Mounting the fans

Mounting the top fans
Mounting the front fans
Mounting the bottom fans

I/O Connectors

Connectors

Product Warranty

Product Name		Model
Date of Purchase	Year/Month/Day	Serial No
Purchase Date		Sales Amount

Quality warranty period: 1 year from the date of purchase. (However, when there is a purchase receipt)
Free A/S: In case of defects or defects in the product’s own performance within the warranty period.
Paid A/S: When a problem occurs in using the product after the warranty period. However, free A/S processing is not available for the following matters even within the warranty period. It is handled at the consumer’s expense.
If you do not follow the precautions and precautions before installation specified in this user manual.
In case of deformation, damage/destruction due to the user’s intention, negligence or negligence.
In case of deformation or malfunction due to user’s arbitrary modification.
When the quality assurance sticker is removed or damaged.
In case of malfunction due to natural disaster.
In case of malfunction due to use in an abnormally humid environment or a space with a lot of dust and other foreign substances (worms, etc.).
Parts retention period: 2 years from the date of discontinuation of the product (However, the time of discontinuation is based on the final shipment date of the discontinued product.)
A/S information
Operating Hours: Weekdays 10:00 ~ 16:00 (Closed on holidays, Saturdays and Sundays)
How to apply
Visit visit: Visit www.zalmansvc.com and sign up for service and bring the product you received.
Delivery by courier: After accessing www.zalmansvc.com and registering as a member, service application is received. After entering your name, contact information, and symptoms, delivery is sent in advance.
Reception desk ※ After checking the exact location and address of the A/S center on the website, visit or send by courier.
Product transportation cost
In case of initial defect: In case of initial defect, round-trip freight cost will be borne by us.
In case of free A/S: In principle, the cost of courier delivery within the free period shall be borne by the customer once (prepaid).
Paid A/S and after warranty period: All round-trip costs are borne by the customer.
How to check the date of manufacture