BELLEZE 014-HG-40749 Rider Desk User Manual
- June 16, 2024
- BELLEZE
Table of Contents
Rider Desk
| FOLLOW US: | CONTACT INFO: | ITEM NO. 014-HG-40749 |
|---|---|---|
| @bellezefurniture |
support@belleze.com
1-800-682-6376| The instruction booklet
contains IMPORTANT safety information. Please read it in full and keep it
for future reference.
Scan this QR Code to view our online tutorial 
Estimated time for assembly:
90 mins
Weight limitations are as follows:
-
Maximum Load
80 lb -
Maximum Load
30 lb -
Maximum Load
20 lb
Assemble the furniture on an empty carton, carpet, or rug to prevent scratches or damage.
For safety, please keep pets and children away from the assembly area.
Ensure the product is fully assembled before use. If you are missing any hardware or products, do not use it until you have restored the missing parts.
This furniture requires 2 people for assembly.
Read this instruction manual prior to assembly to familiarize yourself with the various steps.
Lay out all components and hardware separately on a flat surface and make sure that no parts are missing or damaged before assembly. Do not destroy or discard any packaging until you are certain that you have all the necessary parts for assembly.
Hand tight all hardwares and careful not to over tighten to avoid damaging the product.
CAUTION
There are small components used in the construction of this product.
Loose items should be kept away from pets and children to avoid a choking
hazard.
Keep all plastic bags and packaging film away from pets and children to avoid suffocation.
PACKAGE CONTENTS
CODE
| DESCRIPTION| QTY
---|---|---
1| Top Wire Fence|
1
2
| Left Wire Fence| 1
3| Right Wire Fence|
1
4
| Top Panel| 1
5| Left Panel|
1
6
| Medial Panel| 1
7| Right Panel|
1
8
| Left Back Panel| 1
9| Right Back Panel|
1
10
| Crossbar| 3
11| Storage Panel|
1
12
| Bottom Panel| 1
13| Small Drawer Front Panel|
2
14
| Small Drawer Left Panel| 2
15| Small Drawer Right Panel|
2
16
| Small frawer Back Panel| 2
17| Small Drawer Bottom Panel|
2
18
| Drawer Support Bar| 3
19| Document Drawer Front Panel|
1
20
| Document Drawer Left Panel| 1
21| Document Drawer Right Panel|
1
22
| Document Drawer Back Panel|
1
23
| Document Drawer Bottom Panel| 1
24| Document Drawer Hang Rail|
2
(A) M6 x 30mm 10x + 1x
(B) 1x
(C) Ø8 x 30mm 18x + 1x
(D) M6 x 48mm 6x
(E) M6 x 35mm 12x + 1x
(F) Ø15 x 11mm 12x + 1x
(G1) 4x
(G2) 1x
(H) 4x
(I) Ø4 x 28mm 18x + 1x
(J) M6 x 28mm 15x + 1x
(K) Ø12 x 10mm 15x + 1x
(L) 6x
(M) 1x
(N) Ø3.5 x 12mm 26x + 2x
(O) 8x
(P) Ø3 x 16mm 8x
(Q) 12x
(R) 1x
Install all hardware perpendicular to the opening.
Required tools for assembly (Not included)
1
Detach the slide runner from the slide mount.
- Slide mount
- Slide Runner
2
(L1) 6x (N) Ø3.5 x 12mm 12x
Attach slide mount on the left and medial panels (5, 6).
Make sure to insert screws in the correct opening.
3
(E) M6 x 35mm 6x
Attach cam bolts to the left and medial panels (5, 6).
4
(C) Ø8 x 30mm 3x (F) Ø15 x 11mm 3x (Q) 3x
Assemble the cross bars (10) to the medial panel (6).
5
(C) Ø8 x 30mm 3x (F) Ø15 x 11mm 3x (Q) 3x
Attach the left panel (5) to the other end of the crossbars (10).
6
(E) M6 x 35mm 6x
Attach cam bolts to the underside of the top panel (4).
7
(C) Ø8 x 30mm 4x (F) Ø15 x 11mm 4x (Q) 4x
Assemble the top panel (4) on top of the left and medial panels (5, 6).
8
(C) Ø8 x 30mm 2x (F) Ø15 x 11mm 2x (Q) 2x
Assemble the right panel (7) underneath the top panel (4).
9
Slide the back panels (8, 9) to the back of the assembly.
10
(C) Ø8 x 30mm 6x (D) M6 x 48mm 6x
Attach the bottom panel (12) underneath the assembly.
11
(A) M6 x 30mm 5x
Attach the top wire fence (1) on top of the top panel and the right wire fence (3) to the right panel.
12
(A) M6 x 30mm 5x
Attach the left wire fence (2) to the left panel.
13
(G1) 4x (G2) 1x
Attach locking casters (G1) to the corner and a non-locking caster (G2) to the middle of the bottom panel (12).
14
(O) 8x (P) Ø3 x 16mm 8x
Secure the back panels.
15
(M) 1x (N) Ø3.5 x 12mm 2x
Attach the electric outlet strip on the top panel (4).
16
(L2) 6x (N) Ø3.5 x 12mm 12x
Attach the slide runners to the small drawers left and right panels (14, 15) and the document drawer left and right panel (20, 21).
17
(J) M6 x 28mm 15x
Attach cam bolts to the small drawer front panel (13) and the document drawer front panel (19).
NOTE: Make sure to use the correct cam bolt.
18
(K) Ø12 x 10mm 15x
Assemble the small drawer left panel, right panel, and support bar (14, 15, 18) to the small drawer front panel (13). Then Assemble the document drawer left panel, right panel, and support bar (18, 20, 21) to the document drawer front panel (19).
19
(I) Ø4 x 28mm 18x
Slide in the drawer bottom panels (17/23), then assemble the drawer back panels (16 /22) to the drawer assembly.
20
Slide the drawers into the stand assembly.
- Slide the slider to the forward position.
21
Insert hang rails (24) to the document drawer.
- Change the hang rail position to accommodate different document file sizes.
22
(H) 4x
Insert shelf pegs into the stand and put on the storage shelf panel (11).
YOU’RE FINISHED!
Warning
Only place items on top of the product if they meet the recommended size and weight limits.
Climbing on, stepping on, or placing overweighted objects on the product may cause property damage and/or injuries.
Items placed onto this product must be resting on a support surface without hanging over the edges.
FURNITURE CARE AND MAINTENANCE
Medium – Density Fiberboard
Thank you for your purchase. We want your item to last as long as possible.
To ensure the product gives you years of longevity, please follow the
recommendations in this care and maintenance guide.
MAINTENANCE
- Tighten all bolts and screws again within the first 2 weeks of assembly.
- Check the tightness of all bolts every 2 months and tighten them if necessary.
CLEANING
- Clean the surface of the MDF (medium – density fiberboard) with a lightly dampened cloth.
- A small amount of mild soap can be used if necessary.
- Dry the surface immediately after cleaning.
DO NOT use bleach or alcohol to clean the surface.
DO NOT apply wood treatment on parts made with MDF.
MDF will swell and distort when exposed to water damage. Make sure to dry the furniture immediately after cleaning.
WARNING
The manufacturer and seller are not responsible for any and all liability relating to personal injury, property damage or losses, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, unapproved modification or neglect of this product.
© All copyright of this document belongs to BELLEZE.
This document may not be printed, translated, reproduced, or distributed in
whole or in part without written permission from BELLEZE.
v.03282023
WARRANTY
BELLEZE products come with a 1-year warranty from the date of delivery.
Register your product on our website to enjoy our limited lifetime
warranty!
AFTER-SALE SERVICE
Encounter any difficulties or missing parts?
Contact us at 1-800-682-6376 or email us at support@belleze.com
We will send you replacement.
Hassle free!
No need to worry about repackaging and sending your item back.
We hope you enjoy your new BELLEZE furniture!
Share your photos on Instagram and tag us: @bellezefurniture.
FOLLOW US:| CONTACT INFO:| 
---|---|---
@bellezefurniture|
support@belleze.com
1-800-682-6376
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>