SEALEY SSP151.V2 Leather Welding Gauntlets Instructions
- June 16, 2024
- SEALEY
Table of Contents
LEATHER WELDING GAUNTLETS
MODEL NO: SSP151.V2
READ INSTRUCTIONS
BEFORE USE
SSP151.V2 Leather Welding Gauntlets
Thank you for purchasing a Sealey product. Manufactured to a high standard,
this product will, if used according to these instructions, and properly
maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR
THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE
AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE
INSTRUCTIONS SAFE FOR FUTURE USE.
INTRODUCTION
Heavy-duty traditionally designed extra-large welding gauntlets providing
excellent protection against spatter and heat. Manufactured from split cow
hide leather with Kevlar® stitching, cotton lined cuff with a soft comfortable
fl eece lining. Durability is enhanced by additional leather, stitched over
the palm area of the hand. These gauntlets cannot be used for arc welding.
Five year storage life in cool, dry conditions. In case of
wear/damage/deterioration the gloves must be scrapped.
Certifi ed to EN 12477, Type ‘A’. Rated to EN 388 – 3134X and EN 407 – 41314X.
It meets the requirements of the PPE Regulation 2016/425 applicable from April
21st, 2018: innocuousness, comfort, solidity.
It has been subject to a UE-type Examination performed by: C.T.C. (OO75)
4, rue Hermann Frenkel
69367 LYON Cedex 07
FRANCE
SAFETY
WARNING! This glove doesn’t protect against temperatures over 100o C
WARNING! This glove is not suitable for arc welding.
× DO NOT wear these gloves when there is a risk of entanglement by moving
parts of machines.
2.1. This model does not contain any substances at levels that are known to,
or suspected to, adversely aff ect user hygiene or health.
2.2. The protection against risks or hazards which are not mentioned in this
document is not warranted.
2.3. The levels of performance mentioned are only valid for the palm of the
glove.
2.4. The levels of performance mentioned are only valid for new gloves, not
washed, nor regenerated.
2.5. These levels of performance are obtained from the tests done according to
conditions defi ned by the applicable standards.
2.6. Before use the glove shall be visually controlled, in case of
deterioration, the gloves must be scrapped (abrasion, cut, tear).
2.7. For gloves with diff erent layers of material, the performance levels are
warranted only for the whole glove.
2.8. These gloves do not provide protection against electric shock caused by
defective or live equipment, and the electrical resistance is reduced if the
gloves are wet, dirty or soaked with sweat, this could increase the risk.
2.9. There is no standardised test method at present for detecting U.V
penetration of materials for gloves, but the current method of construction of
protective gloves for welders do not normally allow U.V radiation penetration.
2.10. With arc welding installations, it is not possible to protect all parts
conducting the welding voltage against direct contact for operational reasons.
The gloves do not protect again electrical risks due to defected equipment or
moisture.
2.11. For gloves with two or more layers the overall classifi cation does not
necessarily refl ect the performance of the outermost layer.
APPLICABLE STANDARDS
This glove meets the requirements of the standard EN 420 : 2003 + A1 : 2009 < General requirements for work glove > Dexterity : 2 Moreover, this glove has been designed for the following applications :
Mechanical Hazard
EN 388 : 2016
3134X
| Abrasion Resistance| 3| (on 4 maxi)| ‘X’ indicates that the glove has not
been submitted to the test or the test method appears not to be suitable for
the glove design or material.
---|---|---|---|---
Blade Cut Resistance| 1| (on 5 maxi)
Tear Resistance| 3| (on 4 maxi)
Puncture Resistance| 4| (on 4 maxi)
Cut Resistance Method (EN ISO 13997)| X| (A to F)
Impact Protection| –|
Thermal Risk
EN 407 : 2004
41314X
| Burning Behaviour| 4| (on 4 maxi)
Contact Heat| 1| (on 4 maxi)
Convective Heat| 3| (on 4 maxi)
Radiant Heat| 1| (on 4 maxi)
Small Splashes of Molten Metal| 4| (on 4 maxi)
Large Quantities of Molten Metal| X| (on 4 maxi)
EN12477: 2001/A1:2005: Type A: is recommended for applications without high
dexterity.
The Declaration of Conformity (DOC) can be found at:
www.sealey.co.uk
MAINTENANCE
4.1. STORAGE
4.1.1. Store the gloves in their original packaging.
4.1.2. Store the gloves in normal temperature and humidity conditions.
4.1.3. Store the gloves in clean, covered and ventilated premises.
4.2. MAINTENANCE
4.2.1. The gloves should be inspected before each use, and replaced if
damaged.
4.3. This PPE is subject to ageing and has a 5 year shelf life when stored in
appropriate conditions.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and
disposed of in a manner which is compatible with the environment. When the
product becomes completely unserviceable and requires disposal, drain any fl
uids (if applicable) into approved containers and dispose of the product and fl
uids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve
the right to alter data, specifi cations and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is
required for any claim.
EU | Sealey EU Ltd, Farney Street, Carrickmacross, Co. Monaghan, A81 PK68
Ireland
UK | Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds,
Suffolk. IP32 7AR 01284 757500
[email protected]
www.sealey.co.uk
© Jack Sealey Limited
Original Language Version
SSP151.V2 Issue 1 19/07/23
Documents / Resources
|
SEALEY SSP151.V2 Leather Welding
Gauntlets
[pdf] Instructions
SSP151.V2 Leather Welding Gauntlets, SSP151.V2, Leather Welding Gauntlets,
Welding Gauntlets, Gauntlets
---|---
|
SEALEY SSP151.V2 Leather Welding
Gauntlets
[pdf] Instruction Manual
SSP151.V2, SSP151.V2 Leather Welding Gauntlets, Leather Welding Gauntlets,
Welding Gauntlets, Gauntlets