COUGAR APOLAR 120 ARGB Elite Universal Modular Fan User Manual
- June 16, 2024
- Cougar
Table of Contents
COUGAR APOLAR 120 ARGB Elite Universal Modular Fan
Product Information
Specifications
- Fan Model: Apolar 120 ARGB
- Dimensions (WxDxH): [Dimensions]
- Fan Speed: [Fan Speed] RPM
- Air Flow: [Air Flow]
- Air Pressure: [Air Pressure]
- Acoustic Noise: [Acoustic Noise]
- Rated Voltage: [Rated Voltage]
- Rated Current: [Rated Current]
- Power Consumption: [Power Consumption]
- Bearing Type: [Bearing Type]
- Cable Length: [Cable Length]
- Connector & Control: [Connector & Control]
- Weight: [Weight]
Features
- Q-Stop
- ARGB
- HDB
- PWM
Package Contents
Single Pack
- Apolar 120 ARGB x 1
- Fan Screw Kit x 1
- User Manual
Three Fan Pack
- Apolar 120 ARGB x 3
- Fan Screw Kit x 3
- User Manual
Fan Accessory Kit
Single Pack
- Fan connector with cables x 1
- Fan screw (for water cooling radiator) x 4
- Fan screw x 4
- Adhesive anti-vibration rubber x 8
Three Fan Pack
- Fan connector with cables x 3
- Fan screw (for water cooling radiator) x 12
- Fan screw x 12
- Adhesive anti-vibration rubber x 24
Installation Instructions
Step 1
Please pull the fan clips up.
Step 2
Please align the pins and protruding points of the fan with the connector, and connect them together.
Usage Instructions
The recommended configuration is no more than three fans due to the limitations of your power source devices. Connecting four or more fans may increase the probability of malfunction due to insufficient voltage. Please take note of your power source devices’ maximum current load to avoid overload, which may result in suboptimal performance of the connected fans.
How to Install
Connect the 4-pin cable into an available 4-pin or 3-pin fan header on your motherboard or fan controller. Ensure that the fan connector guides line up with the guide on the fan header. Installing a 4-pin fan on a 3-pin header will no longer benefit from PWM control. Do not force the connector into the fan header. Installing the fan connector incorrectly will cause device malfunction. Refer to your motherboard manual for fan header location(s).
FAQ
Q: What is the warranty period for the COUGAR Apolar 120 ARGB?
A: The warranty period for the COUGAR Apolar 120 ARGB is 3 years.
Q: Can I connect the fan to a 4-pin 12V header?
A: No, please do not connect the fan to a 4-pin 12V header.
Q: Where can I find more information or contact the manufacturer?
A: You can visit the official website at www.cougargaming.com. For technical service in the USA, you can contact COUGAR USA Technical Service at 833-256-3778 or email rma@compucaseusa.com.
PACKAGE CONTENTS
| SINGLE PACK | THREE FAN PACK |
|---|
Apolar 120 ARGB x 1
| ****
Apolar 120 ARGB x 3
Fan Screw Kit
| ****
Fan Screw Kit
User Manual
| ****
User Manual
FAN SPECIFICATIONS
Fan Model
| Apolar 120 ARGB
Dimensions
| 120 x 120 x 28 mm
Fan Speed
| 600-2200 RPM ± 200RPM
Air Flow
| 75.38 CFM ± 10%
Air Pressure
| 2.59 mm H₂O ± 10%
Acoustic Noise
| 37.1 dB(A) (Max.)
Rated Voltage
| 12 VDC (Fan) / 5 VDC (LED)
Rated Current
| 0.2 A (Fan) / 1.1 A (LED)
Power Consumption
| 2.4 W (Fan) / 5.6 W (LED)
Bearing Type
| HDB Hydro Dynamic Bearing
Cable Length
| 490 mm (Fan) / 470 mm (ARGB)
Connector & Control
| 4 Pin PWM / 3 Pin ARGB
Weight
| 196 g ± 5g
FAN ACCESSORY KIT
SINGLE PACK
|
Fan connector with cables
| ****
x1
| ****
Fan screw (for water cooling radiator)
| ****
x4
|
Fan screw
| ****
x4
|
Adhesive anti-vibration rubber
| ****
x8
THREE FAN PACK
|
Fan connector with cables
| ****
x3
| ****
Fan screw (for water cooling radiator)
| ****
x12
|
Fan screw
| ****
x12
|
Adhesive anti-vibration rubber
| ****
x24
INSTALLATION INSTRUCTIONS
- Please pull the fan clips up.
- Please align the pins and protruding points of the fan with the connector, and connect them together.
The recommended configuration is no more than three fans due to the limitations of your power source devices. Connecting four or more fans may increase the probability of malfunction due to insufficient voltage.
Depending on your needs, you can attach the adhesive anti-vibration rubbers to the fan’s mounting holes to ensure a more stable operation.
Please take note of your power source devices’ maximum current load to avoid overload, which may result in suboptimal performance of the connected fans.
HOW TO INSTALL
Connect the 4-pin c able into an available 4-pin or 3-pin f an header on y our motherboard or fan controller
CAUTION
- Ensure that the fan connector guides line up with the guide on the f an header.
- Installing a 4-pin fan on a 3-pin header will no longer benefit from PWM control.
- Do not force the connector into the fan header. Installing the fan connector incorrectly will cause device malfunction.
- Refer to your motherboard manual for fan header location(s).
GLOBAL WARRANTY POLICY
WARRANTY PERIODS OF COUGAR GAMING DEVICES
- Product: COUGAR Apolar 120 ARGB
- Warranty : 3 Years This warranty gives you specific legal rights. You may also have other rights granted under local law. These rights may vary.
MANUFACTURER CONTACT
COUGAR USA Technical Service
- Tel: 833-256-3778
- Mail:rma@compucaseusa.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>