VEVOR ZG-18-SJL Backdrop Stand User Manual
- June 16, 2024
- VEVOR
Table of Contents
VEVOR ZG-18-SJL Backdrop Stand
Product Information
The Backdrop Stand, model number ZG-18-SJL, is made of steel and has the following dimensions: 3500mm in length, 660mm in width, and a height that can be adjusted between 2400mm and 2920mm. The stand weighs 5.3kg.
Contact Information
- If you have any product questions or need technical support, please feel free to contact us at CustomerService@vevor.com.
FAQ
- Q: Can I use the Backdrop Stand on uneven surfaces?
- A: The Backdrop Stand should only be used on a flat, level, hard, and smooth surface capable of safely supporting it.
- Q: How much weight can the Backdrop Stand support?
- A: Please do not exceed the weight capacities specified for the Backdrop Stand to ensure safe usage.
- Q: Can children play with the Backdrop Stand?
- A: No, the Backdrop Stand is not a toy and should not be used by children.
We continue to be committed to provide you with tools at a competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are saving half in comparison with the top major brands.
MODEL NO.: ZG-18-SJL
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
WARNING
Please read this manual carefully before using the product. Failure to do so
may result in serious injury. SAVE THIS MANUAL
ASSEMBLY PRECAUTIONS
- Assemble only according to these instructions. Improper assembly can create hazards.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
- Keep the assembly area clean and well-lit.
- Keep bystanders out of the area during assembly.
- Do not assemble when tired or under the influence of alcohol, drugs or medication.
- The product capabilities apply to properly and completely assembled products only.
- Assemble on a flat, level, hard and smooth surface capable of safely supporting the Backdrop Stand.
- For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.
USE PRECAUTIONS
TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:
- DO NOT SIT OR STAND ON THIS ITEM.
- This product is not a toy. Do not allow children to play with or near this item.
- Do not exceed weight capacities. Please empty the Backdrop Stand before moving.
- Use only on a flat, level, hard and smooth surface capable of safely supporting a fully loaded Backdrop Stand.
- Use as intended only.
- Inspect before every use. Do not use if parts are loose or damaged.
TECHNICAL SPECIFICATIONS
- Model: ZG-18-SJL
- Main Material: Steel
- Product Dimensions(LWH): 3500660(2400-2920)mm
- Packing Size(LWH): 1040200160 mm
- Net Weight (kg): 5.3kg
- Gross Weight (kg): 6.0kg
PACKAGE CONTENTS
ASSEMBLY STEPS
COMPLETION
CONTACT
- Have product questions? Need technical support? Please feel free to contact us:
- CustomerService@vevor.com.
- Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
- Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
- Imported to the USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
SHUNSHUN GmbH
- Römeräcker 9 Z2021,76351
- Linkenheim-Hochstetten,Germany
Pooledas Group Ltd
- Unit 5 Albert Edward House, The Pavilions
- Preston, United Kingdom
Support and E-Warranty Certificate www.vevor.com/support Made In China.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>