Corsaira 20LAG9901 Light Strip Pro User Manual

Table of Contents

User Manual

Light Strip Pro length can be adjusted according to the application (maximum tape length 2000 mm). You can shorten the Light Strip Pro with scissors by cutting off its oval copper points from Cut saws Light Strip Pro -of the tape before cutting it.
Clean the mounting surface with a lint-free cloth on canvas. Reveal a small part of Light
From the back of Strip Pro tape from the adhesive surface by peeling off the protective film.
Press the tape onto the installation surface and press it 5-10 seconds. Peel off the final film slowly one is jealous at the same time as the other with envy you press down the newly exposed ones parts of the adhesive surface. When it is completely installed in place, wrestle with your fingertip forcefully the entire Light Strip Pro tape along the length of the gluing for confirmation. Install the driver using another tesa® adhesive tape.
Light Strip Pro and its controller are magnetic and can be attached for ferromagnetic metal surfaces without glue. If you use an ICD device or pacemaker, power from bays or long-term contact with magnets and with their magnetic fields.

Download and install the Control Center application Mac, Windows, iOS or Android access the system from: elgato.com/download
Connect the LED strip to the controller. Connect guide to the river bay at the foot of the river and connect the power bay to the mains. When it is powered, Light Strip Pro shows a fast startup sequence and accelerates mating mode.
Kaynnisté Control Center application and pair it with Light Strip Pro with by pressing the + icon.
Control Center guides you through the installation process through. If you want to pair Light Strip Using the Pro tape in a Wi-Fi network Mac computer, Kaynn Light Strip Pro, click Status in the upper right corner menu Wi-Fi icon and select new your lisd equipment.
After you have completed the Airport tydkalu installation process, you can use Light Strip Pro Elgato Control in the Center application.
Use the Control Center application Light
For connecting the Strip Pro strip to the pole and off the stake, with glory, various fine saatdé mixed lémpotila for setting. If your computer doesn’t no Wi-Fi feature, use Elgato Control Center application for i0S or Light Strip Pro nayhan on an Android device for listing. Wi-Fi connection is required only for the first mating.
After they have been mated once, you can control the Light Strip Pro any wired tat of your network via a wireless device.

RESET resets Light Strip Pro-the factory settings of the tape and sina havidvat all Wi-Fi credentials. Press RESET button with a small with the tool and keep it down as low as possible 10 seconds until the light flashes 3 times. Light Strip Pro will restart automatically and enters pairing mode.

Light Strip Pro may get hot if it will be used for a long time. Check it out always carefully.
Light Strip Pro is intended only sister girl.
Ala peida taté product alaka especially the controller.
Be especially careful if there are children on the farm.
Start sharing Light Strip Pro direct sunlight.
Keep the lighting surface clean and polyttémand. If Light Strip Pro gets dirty, wipe it lightly with a soft cloth with a cloth moistened with a small water on earth and mild neutral with a cleaning agent. Benzene, tinner and other volatile substances may cause there will be no damage to it ever use to clean it.
Do not use the product other than tassd in the guide and packaging for the stated purposes of use.
Ald use other lisd equipment than supplied with the product or which the manufacturer has stated to be compatible with it.

Light Strip Pro-QSG-230703_Print.indd 13-14
03.07.23
11:12

Read User Manual Online (PDF format)