inlei TS103 Universal TV Stand Base User Guide
- June 16, 2024
- inlei
Table of Contents
inlei TS103 Universal TV Stand Base
Product Information
The Screw Bag (TS103) is a set of screws and accessories designed for the assembly of a product. It includes rubber feet, M Bolts, Spacers, and Washers. These components are essential for the proper installation and stability of the product.
Specifications
- Rubber Feet-A
- M Bolt-B
- M Bolt-C
- M Bolt-D
- M Bolt-E
- M Bolt-F
- Spacer-G
- Spacer-H
- Washer-I
- Washer-J
- M* Bolt-K
Product Usage Instructions
- Step 1: Before Installation
- Make sure to read the instructions and warning information provided carefully before starting the assembly process.
- If you have any doubts or encounter any problems, it is recommended to contact qualified local installation personnel.
- Do not proceed with the assembly if the product is damaged or missing any accessories.
- Step 2: Install the Base and Pillar
- Begin by installing the Glass Base-N and Pillar-O.
- Follow the provided guidelines and ensure a secure connection between these components.
- Step 3: Install the Head Support
- Proceed to install the Head Support-M onto the Pillar-O.
- Make sure it is properly aligned and securely attached.
- Step 4: Install the Panel and TV
- Next, install the Panel-L onto the Head Support-M.
- Ensure a firm connection to provide stability.
- Then, carefully position the TV onto Panel-L and align it correctly.
- Step 5: Wire Layout
- Organize the wiring by following the provided wire layout instructions.
- This step ensures a neat and safe setup.
- Step 6: Need to Hold up the TV
- If necessary, use the Elliptic Lock-e and Elliptic Pad-f to hold up the TV securely.
- This step may vary depending on the specific product requirements.
- Step 7: Remove and Reinstall Bolts
- To finalize the installation, remove the pre-installed bolts carefully.
- Insert the TV into the Head Support-M as shown and then re-install the removed bolts to secure the TV in place.
- Step 8: Finished
- Once all the steps are completed, your product assembly is finished.
- Make sure to double-check all connections and ensure everything is properly tightened and aligned.
- Frequently Asked Questions (FAQ)
- Q: What should I do if I don’t understand the instructions or face any problems during assembly?
- A: If you have any difficulties or concerns regarding the assembly process, it is recommended to contact qualified local installation personnel for assistance. They can provide guidance and ensure a safe and proper installation.
- Q: Can I use these products for purposes other than their intended design?
- A: No, it is important to use these products only for their intended purpose as specified in the instructions. Using them for other purposes may result in safety hazards or damage to the product.
- Q: What should I do if I need replacement parts or have any other inquiries?
- A: If you require replacement parts or have any other inquiries, please contact us for assistance. We will be happy to provide the necessary support and address your concerns.
Pay Attention
Warning! If improperly assembled, may result in serious injury, death or property destruction. Please read the instructions and warning informa- tion carefully before assembling.
- If you do not understand the instructions or encounter any problems, please contact the qualified local installation personnel.
- Do not assemble products if they are damaged or missing accessories.
- If you need replacement parts or anything else, please contact us.
- Do not use these products for anything other than the purpose for which they were designed.
- This product design includes sliding parts, please use caution for safety.
HARDWARE
Screw Bag 1
Screw Bag 2
PARTS
INSTALLATION STEPS
- Step 1: Install the base and pillar
- Step 2: Install the head support
- Step 3: Before installation
- Step 4: Install the panel and TV
- Step 5: Install the TV and head support
- Remove the pre-installed bolts
- Put the TV into the head support and push it in as shown
- Then re-install the removed bolts
- Step 6: Wire layout
TS103
Read User Manual Online (PDF format)
Loading......