GENYED G9530 Clear Safety Glasses Instruction Manual

GENYED G9530 Clear Safety Glasses

Description and product overview

1. Safety glasses model GENYED® G9530 CLEAR KN with polycarbonate lenses, frame made of polycarbonate and TPR complete with fabric case.
2. The product meets the European CE standard EN 166:2001 and complies with PPE
3. Regulation (EU) 2016/425, CE and UKCA marked.
4. Anti-scratch and anti-fog lenses.
5. Lens protection: UV400.
6. Suitable for protection against low-impact shocks typical of factories, laboratories, educational establishments, DIY activities, etc., which could damage the eyes or impair vision.

Safety precautions

1. Read the user manual carefully before using the product.
2. Do not modify or alter the product under any circumstances.3. Do not use this product to protect yourself against risks other than those specified in this document/instruction manual.
3. GENYED® G9530 CLEAR KN safety glasses must be replaced after two years of use.

Specifications

1. Frame marking: GENYED EN166 FT CE UKCA – Lot number
2. Lens marking: 2C-1.2 G 1FT KN CE UKCA
3. Impact resistance: F (low impact 45M/S)
4. Optical class: 1
5. Frame colour: blue/grey; Lens colour: clear
6. Weight: 0.85oz

Usage

1. Check carefully before putting on the glasses that the lenses are perfectly clean and have no scratches.
2. Wear the glasses before exposing yourself to any hazardous conditions for which protection is required.
3. PPE is intended for personal protection and should not be interchanged between multiple users.
4. Ensure that the protective eyewear is worn comfortably.
5. Wear the goggles for the entire duration of exposure to the risks.
6. If the glasses have scratches, or damage or have been subjected to shocks, replace them immediately.

Cleaning

1. Cleaning should only be carried out using a special lens cloth.
2. The standard anti-fog treatment gradually fades and may peel off after washing. Therefore, only use lens-specific cloths.
3. Do not clean any part of the product with petrol, chlorinated degreasers, organic solvents or abrasive cleaning agents.

Storage instructions

1. Store the glasses inside the fabric case provided, in a protected, dry, cool and ventilated place out of direct sunlight and away from chemicals and abrasive substances.
2. Store between 5 to 40℃; humidity less than 90%.

Warranty [2 years]

1. The product warranty is 2 years.
2. Damage resulting from improper use is not covered.

GENYED Srls Via Maino, 6 – 21013 Gallarate Italy
www.genyed.com – info@genyed.com

References

• GENYED® - Home Page

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>