Hanwha Vision SBV-180WW Series Vandal Back Box Instruction Manual
- June 16, 2024
- Hanwha Vision
Table of Contents
Hanwha Vision SBV-180WW Series Vandal Back Box
Specifications
- Package includes: 1x Vandal Back Box SBV-180WW
- Compatible models: Please visit our website for more information
Product Overview
This product is an adaptor used to mount a compatible camera on an electrical gang box, wall, or ceiling.
Installation Precautions
Please take note of the following installation precautions:
- Please make sure to install on an area which is strong enough to support more than 4 times the total weight of this product and the camera.
- Depending on some installation conditions, this product can be connected to 0.75 PF which is a screw peak processed pipe.
Product Usage Instructions
-
Step 1: Mounting the Back Box
-
- Ensure that the installation area is strong enough to support the weight of the back box and the camera.
- Attach the back box to an electrical gang box, wall, or ceiling using the provided screws.
- Tighten the screws securely to ensure stability.
-
Step 2: Mounting the Camera
-
- Prepare the compatible camera for mounting.
- Align the mounting holes on the camera with the corresponding holes on the back box.
- Insert and tighten the TR20 screws (provided) into the mounting holes until secure. Use a torque of 1.5N.m (1.1lb.ft).
-
Step 3: Cable Management
Ensure proper cable management to maintain a clean and organized installation. -
Step 4: Additional Installation Steps
-
- If required, install additional components such as M25 (3/4) for cable entry.
- For specific compatible camera models (XNV-6080R, XNV-L6080R, XNV-6085, XNV-6120R, XNV-8080R, XNV-6081R, XNV-8081R, XNV-6083R, XNV-8083R, XNV-8093R, XNV-9083R, XNV-C6083R, XNV-C7083R, XNV-C8083R, XNV-C9083R), follow the provided instructions for mounting and securing the camera using TR20 screws.
- Tighten the TR20 screws securely with a torque of 1.5N.m (1.1lb.ft).
- If needed, refer to the PT01-005792B manual for further instructions.
FAQ
-
What is the purpose of the Vandal Back Box?
The Vandal Back Box is an adaptor used to mount a compatible camera on an electrical gang box, wall, or ceiling. -
Where can I find the compatible camera models?
Please visit our website for a list of compatible camera models that can be used with the Vandal Back Box. -
What is the recommended torque for tightening the TR20 screws?
The recommended torque for tightening the TR20 screws is 1.5N.m (1.1lb.ft).
Package
Product Overview
This is an adaptor used to mount a compatible camera on an electrical gang box, wall, or ceiling. (For compatible models, please visit our website.)
Installation Precautions
- Please make sure to install on an area which is strong enough to support more than 4 times of the total weight of this product and the camera.
- Depending on some installation conditions, this product can be connected to 0.75” PF which is a screw peak processed pipe.