VDLPOWER PS0800 Portable Power Station Instruction Manual

VDLPOWER PS0800 Portable Power Station

PRODUCT OVERVIEW

LED Display Switch
Short Press to control LED display on/off

Input

1. DC: 240W(30V)
2. USB-C : PD 100W
3. Solar: 240W(17-24V)
4. Car Charger: 240W(12-30V)

Output

1. USB-C : PD 100W
2. USB-A 1/2 : 18W
3. Car Socket /DC Output shared 120W
4. AC: Stable at 800W Peak at 1600W

Chargeable device

• USB Output: Smartphone, Smartwatch, Digital Camera, E-reader, Tablet, etc.
• 12V Car charger Outlet: Light, Car Adaptor, etc.
• AC Output : Laptop, LED screen, Household appliances, etc.

Charging Method

Before using or storing the product, please charge it with the charger. When connected to the mains for charging, the indicator light of the charger is on, and the LED screen will display the current charging ratio.When the LED screen shows that the power is 100%, it means full. The current battery level can be checked through the LED screen.

Packaging List

Important safety information

Warnings! Please notice the following safety precautions carefully.

• Do not make a short-circuit. Please avoid storing the product together with metal objects, such as coins, jewelry, keys, etc.
• Do not water or heat the product, such as putting in the fire or liquid, including direct sun light.
• Do not place the product in a highly humid and dusty environment.
• Do not disassemble the device in any way.
• Do not drop, put heavy objects on or strongly impact the product.
• Please place this product in a place where people with low physical, sensory and mental abilities, lack of experienced and relevant knowledge person can not reach, unless there is supervision or guidance by personnel responsible for their safety.
• Please avoid children operating this product.
• Do not cover the product with towels or clothing when using it.
• Get hot when being charged is a normal phenomenon, please be careful.
• Do not exceed the time request for this product to be charged.
• Please disconnect with the product in time if the appliances are fully charged.
• Please use the product normally and avoid electric shock.
• Please deal with the scraps according to the regulations. Do not treat the built-in batteries as domestic garbage, so as not to cause explosion and pollution.
• Only used for emergency power supply, can not replace standard DC power supply or AC power supply for household appliances or digital equipment.

Use Instructions

How to use it:

1. Make sure that the total power of all loaded devices is lower than that of the rated power.
2. Press”USB Power Button”, “DC Power Button” or “AC Power Button” once to turn on their corresponding USB/DC/AC ports or sockets; press again to turn them off.
3. If the product is not used for a long time, it should be recharged every three months. It is better to keep the power at 60%-80% and store it in a cool and dry place.
   To aviod the battery lose power, please turn off the AC button when not in use.

SPECIFICATION

LED Screen Instructions

The LED screen of this product displays the product usage status. When the product is fully charged, the LED screen turns off and stops charging. When any function is activated, the screen will light up. When the screen display is not needed, you can press the button to turn off the LED screen.

1. Input indicator
2. Battery level display
3. Output indicator

Operating lemperature range:

Low temperature may affect the battery capacity of the product, The product can be charged in a temperature range of 0°- 40°. Charge the product when the temperature is below 0°, We recommend placing the product in an insulated cooler or other temperature conditions, also connect it to a power source (AC output socket, solar photovoltaic panel). The product can charge the device in the temperature range of -10°- 40°.

Frequently Q&A

• What is the battery type?
  Li-ion battery.

• Can the product be taken on the aircraft ?
  No, According to the airline transportation standards, 100Wh capacity of lithium battery can not board the aircraft.

• How to estimate the working time of the product?

  • The LED display of this product can help you better understand the working status of the power supply.
  • When the IN (input terminal) in the screen is on: it means the product is charging.
  • When the OUT (output terminal) in the screen is on: it means the product is in the discharging state.
  • You can recognize the remaining working time of the product by the battery percentage in the display.

Customize your carefree After sales service

If there is a problem with the product within 12 months from the order date, the same new product will be replaced promptly after confirmation. In addition, for members of VDL’s official online store, the usual 12-month product warranty will be automatically extended to 24 months.

How can I join?

• Step1: Please fill in warranty card.
• Step2: Please take the warranty card picture
• Step3: Please email the picture to: [email protected]

WARRANTY CARD

Caution: *Please be sure to fill in the marked fields and hand them over. If you do not fill in, you may not receive free repair.

Warranty Policies

1. If the product breaks down or is damaged in normal use according to the precautionary statements such as the instruction manual and the label attached to the main unit, we will repair or replace it free of charge.
2. If you want to receive free repair due to malfunction within the warranty period, please contact the VDL Service Center ( service@vd|power.com).
3. If you are unable to request repairs from Amazon, which is included in this warranty, due to a move or gift, please save your Amazon order number.
4. Even within the warranty period, repairs will be charged in the following cases:
5. Failure or damage due to mistakes in use, improper repair, modification, etc.
6. Failure or damage due to dropping after purchase
7. Breakdown and damage due to fire, earthquake, and other natural disasters
8. Failure or damage when used for purposes other than general household use (for example, long-term use for business use)
9. Failure or damage due to movement, transportation or contact with furniture and fixtures after purchase
10. If this document is not presented
11. This manual will not be reissued, so please keep it in a safe place so that it will not be lost.

How to Return/Replace/Repair

• Please fill in warranty card & find the SN number on the product;
• Contact our email: [email protected]
• Send defective products to our local warehouse.

ABOUT COMPANY

• eVatmaster Consulting GmbH
• Bettinastr. 30
• 60325 Frankfurt am Main,Germany
• [email protected]
• www.vdlpower.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>