MA-1850 APEX ANC Wireless Headphones User Manual
- June 16, 2024
- Apex
Table of Contents
MA-1850 APEX ANC Wireless Headphones
User Manual
Includes:
APEX ANC Wireless Headphones
USB Type-C Charging Cable Travel Case
User Manual & Warranty
FEATURES STORY
PRODUCT SPECIFICATIONS
Bluetooth | 5.3 |
---|---|
Bluetooth profiles | A2DP, HSP, HFP, AVRCP |
Connectivity class | Bluetooth Class 2 (10 meter) |
High performance driver | 2 x Ø40 mm |
Frequency response | 20 Hz – 20 kHz |
Sensitivity | 100dB +/- 3dB at 1kHz |
Impedance | 32 |
Signal to noise ratio | > 94 dB |
Charging method | USB Type-C charging |
Battery type | Lithium-ion polymer battery |
Battery capacity | 500 mAh |
Play time | up to 55 hours (varies by volume level and audio content) |
Recharge time | Approx. 2 hours |
Dimensions | 185 x 165 x 80 mm |
OPERATE YOUR HEADPHONES
Bluetooth Connection
Devices with Bluetooth 5.3 wireless technology equipped computers,
smartphones, and MP3 players.
To use Bluetooth for your audio connection, first pair APEX with your audio
source (music player, smartphone, laptop or other Bluetooth equipped device
that can act as audio source). Make sure APEX is fully charged and turn it on
by press and hold the Power button for 3 seconds. Once the power is turned on,
APEX is in Bluetooth pairing mode. You can hear a voicenotification – “Power
on, pairing” and the LED indicator is blinking in red / blue quickly. Make
sure Bluetooth is enabled on your audio source and in a few moments
‘MUVEACOUSTICS:APEX’ will appear on your list of possible Bluetooth
connections. Press ‘pair’ or ‘connect’ on your device and after the connection
is made, the LED indicator will flash in blue every 10 seconds and you can hear
“Connected”. Then your device is paired.
From now on, when you turn on APEX, it will automatically search for the last
Bluetooth device it was paired with.
While there is no pairing with Bluetooth device within 5 minutes, APEX will
turn off automatically with a voice notification – “power off” and you need to
switch on again for further use.
Multi-Point Connection
APEX can maximum connect 2 devices. Once1 FIRST device is connected, turn off
Bluetooth in device settings. Headphone will auto enter Bluetooth Pairing.
Enter your SECOND device Bluetooth settings and connect to headphone. Enter
your FIRST device settings.
Turn on Bluetooth and reconnect to headphone.
Battery Charging
Please use the cable provided to recharge the headphones. It will take 2 hours
to fully charged.
OPERATIONAL GUIDANCE
Function | Button | Audio | LED |
---|---|---|---|
Power on the headphones | Press and hold the On/Off button for 3 second | Power |
On Battery Full (80%-100%)
Battery Medium (30%-70%)
Low Battery (less than 20%)| Blue light goes on for 1 second
Pairing with Bluetooth device| Pairing| Blue and red light flashing quickly
Pairing success| N/A| Connected| Blue light flash once every 10 seconds
Function| Button| Audio| LED
---|---|---|---
Enter pairing mode again| Power off and then hold the On/Off button for 5
seconds| Power On Pairing| Blue and red light flashing quickly
Play / pause| Press the On/Off button once| N/A| Blue light flash once every
10 seconds
Answer Incoming call| Press the On/Off button once| Ringtone| Blue light goes
on constantly
Function| Button| Audio| LED
---|---|---|---
Phone call in progress| N/A| N/A| Blue light flash once every 2 seconds
End a call| Press the On/Off button once| N/A| Resume to that of play mode or
standby mode
Refuse incoming call| Press and hold the On/Off button for 2 seconds| N/A| N/A
Voice assistant| Press the On/Off button twice| N/A| Blue light flash once
every 2 seconds
Function| Button| Audio| LED
---|---|---|---
| | |
Increase volume| Press “+” button once| Max volume| N/A
Decrease volume| Press “-” button once| N/A| N/A
Next song| Press and hold the “+” button| N/A| N/A
Previous song| Press and hold the “-” button| N/A| N/A
Function| Button| Audio| LED
---|---|---|---
Battery level is low| N/A| Low Battery| Red light flashing once every 2
seconds
Power off the headphone| Press and hold the On/Off button for 5 seconds| Power
off| Red light goes on for 1 second
Battery charging mode| N/A| N/A| Red light goes on constantly
Battery has been fully charged| N/A| N/A| Red light turns off
Function| Button| Audio
---|---|---
ANC On / Transparency / ANC Off| Press the ANC button once to cycle 3 modes|
ANC On / Transparency / ANC Off
Low Latency Mode (Gaming)| Press the ANC button twice to cycle On and Off| Low
Latency On / Low Latency Off
Factory Reset| When Power is off, press and hold the power button for 5
seconds until the light flashes blue and red.
Keep holding “+” and “-” buttons simultaneously for 10 seconds until you see
the red light flashing 3 times.
Headphone power OFF automatically
cover
Thank you for trusting MUVEACOUSTICS with delivering you excellence in
sound.
We encourage you to connect with us and become a part of our community!
back cover
SAFETY INSTRUCTIONS
Warnings
- Contains small parts which may be a choking hazard. Not suitable for children under age three.
- Set a low volume setting before using the headphones.
- Long-term exposure to loud music or sounds may cause hearing damage. It is best to avoid high volume levels when using these headphones, especially for extended periods.
- Do not use these headphones when operating a motor vehicle, a bicycle, machinery or where your inability to hear outside sounds may present a danger to you or others.
Cautions
- Using these headphones limits your ability to hear noises around you, regardless of listening volume. Please use caution when using these headphones.
- Do not drop, sit on, or allow the headphones to be immersed in water.
This symbol indicates that this product shall not be treated as household
waste. Instead it shall be handed over to the applicable collection point for
the recycling of electrical and electronic equipment.
Unsuitable for children under three years because it might, for instance,
contain small parts.
To prevent possible hearing damage, do not listen at high volume levels for
long periods.
The input voltage to the product is 5V 1A.
For your safety, please always use appropriate 5V output charger/Adapter to
charge the product. DO NOT USE Quick Charging USB Adapter to charge the
product, as it might damage the product. Only charge the product at ambient
temperatures between 10°C / 50°F and 40 °C / 104°F. Do not heat above 70°C /
158°F, eg. Do not expose to sunlight or throw into fire. Switch off the product
after use. Please note that we won’t take any responsibility for any wrong
operation (eg. Voltage higher than 5V) as this may result in severe injury or
loss of property, and we cannot control the operating process during the time
the user using this product.
In extreme cases, abuse or misuse of Lithium battery pack can lead to
explosion,heat generation, fire development or smoke development. Warnings
To assure continued compliance, any changes or modifications not expressly
approved by the party.Responsible for compliance could void the user’s
authority to operate this equipment.
FCC Statement
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions,may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
The device has been evaluated to meet general RF exposure requirement.
The device can be used in the portable exposure condition without restriction.
ONE-YEAR LIMITED WARRANTY
MUVEACOUSTICS APEX headphones have been subjected to a thorough series of
tests to ensure the highest level of dependability. It is unlikely that you
will experience any problem, but if a defect should become apparent during the
use of this product, MUVEACOUSTICS warrants to the original purchaser that
this product will be free from defects in material and workmanship for a
period of 12 months from the date of your original purchase from an authorized
dealer. If a defect covered by this warranty occurs, MUVEACOUSTICS, at its
option, will repair or replace the product purchase at no repair charge
(postage charges will apply). If a replacement is necessary and your product
is no longer available, a comparable product may be substituted at the sole
discretion of MUVEACOUSTICS.
This warranty does not cover normal wear and tear, abusive use or misuse,
modification, tampering or by any other cause not related to either materials
or workmanship. This warranty does not apply to product used for any
industrial, professional or commercial purposes.
CUSTOMER SERVICES
For service on any defective under 12 months warranty policy, please
contact Consumer Support.
Email: consumersupport@zeeva.com
Keep all relevant information for future reference Imported and distributed by
Zeeva International Limited.
All rights reserved
Suite 1007B–1008, 10/F, Exchange Tower, 33 Wang Chiu Road, Kowloon Bay, Hong
Kong 2011003
Desigend by:
www.muveacoustics.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>