iWALK MXB009 Wireless Charger User Manual

iWALK MXB009 Wireless Charger

Product Introduction

Charge your phone or devices

Power

Recharge vour Power Grin10000

Press the power button to use the Pass-through Charging

When charging and discharging, give priority to fully charging the mobile phone and then fully charging the mobile power supply

Specifications

• Product Name: PowerGrip10000
• Model No.: MXB009
• Capacity: 10000mAh (3.85V/38.5Wh)
• USB-C Input: 5V=3A,9V=2.22A,12V=1.67A
• USB-C Output: 5V=3A,9V=2.22A,12V=1.67A
• Wireless Charging: 5W/7.5W/10W/15W
• Size: 104.3×66.8×26.8mm
• Weight: 212.6g

Warranty card

Thank you for purchasing the iWALK product. Our product’s warranty period is 12 months starting from the date of purchase. Within the warranty period,free service will be provided to the consumer.If the product has any quality problems(requiring warranty card with distributor’s official stamp and valid S/N).
Paid service:customer will incur a repair charge as follows:

• No valid warranty card or warranty card incompatible.
• No S/N or S/N incompatible with warranty card.
• Malfunction caused by artificial damages(like external impact or submerging product into water, ect.)
• Misuse of the product.User has not followed the instructions in the manual.
• Product disassembled or repaired by individual or unauthorized service center.
• Damages caused by storing the product in a hot or humid environment.
• Defects or malfunctions due to force majeure.

Dealer’s Information

• Dealer Name:
• Product Type:
• Tel:
• Sales Date:

User’s Information

• Model No.:
• Product Name:
• User’s Name:
• E-mail:
• Tel:
• ADD:
• Warranty Content:

Please complete warranty card and use for any future warranty service

• This wireless charger is not compatible with non-MagSafe phone cases, such as Otterbox Defender cases.
• Do not use an adapter with an output of 5V/1A (5W) or less.
• Wireless chargers make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers.
• High temperatures will reduce charging speed and restrict power, which is something that happens to all wireless chargers. It is recommended that you charge your device in environments with temperatures below 25°C / 77°F.
• Both the protective phone case and the position of your device on the wireless charger will affect the charging speed. The farther it is placed from the center of the wireless charger, the slower the charging speed will be

IMPORTANT SAFETY INSTRUCTIONS

Please make sure to notice the following reminder:

1. Please store this product in a cool and dry place. Do not place this product in a car, kitchen, or other high-temperature or humidenvironments. It must not be exposed to water or heat, and should not be placed near an open flame to prevent any potential hazards.
2. Please charge the product by using the matched charging device. Don’t use the power supply, charger, charging line to charge theproduct in case cause damage to the product or lead to fire hazard to cause personnel damage and other adverse consequence.
3. The working temperature shall fall between 0°C and 40°C (32°F-104°F).
4. Please don’t dismantle the product. If the product needs to service or maintenance, please contact the after-sale maintenance personnel of the manufacturer to assist to process, so as to avoid causing the damage to the product or other dangerous.
5. If not used for a long period of time, the product shall be charged and discharged once every three months.
6. When charging, the product may be hot, which is normal and there is no need to worry.
7. Under normal use, battery performance may gradually degrade in a few years.
8. Improper use, falling or excessive force may damage the product.
9. When disposing of old and useless batteries, please separate the batteries of different electrochemical systems.

FCC

FCC statement:
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. During the operation of device a distance of 0 cm surrounding the device and 0 cm above the top surface ofthedevicemust be respected.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>