BACHMANN BN3000 BlueNet Socket Instructions
- June 15, 2024
- BACHMANN
Table of Contents
BACHMANN BN3000 BlueNet Socket
Specifications
- Power: 120V, 60Hz
- Capacity: 1.5 liters
- Material: Stainless steel
- Dimensions: 10″ x 8″ x 6″
- Weight: 2.5 lbs
Product Usage Instructions
- Unboxing: Carefully unpack the product and remove all packaging materials.
- Setup: Place the product on a flat, stable surface near a power outlet.
- Filling: Open the lid and fill the water tank with fresh water up to the maximum level indicated.
- Operation: Plug in the device and press the power button to start the operation.
- Settings: Adjust the temperature and timer settings according to your preference.
- Cleaning: After use, allow the product to cool down, then clean it thoroughly following the provided instructions.
FAQ
Frequently Asked Questions
- Q: How do I scale the product?
- A: To descale the product, mix equal parts of water and vinegar, fill the water tank, and run a cleaning cycle following the user manual instructions.
- Q: Can I use this product for cooking?
- A: No, this product is designed for beverage preparation only and should not be used for cooking purposes.
- Q: What should I do if the product malfunctions?
- A: In case of malfunction, unplug the product immediately and contact customer support for assistance.
Installation And Safety Instructions
- Risk of injury if these instructions are not followed!
- Before operating and using this product for the first time, this document must be read carefully and attentively. It must be kept permanently and also forwarded to the recipient if the product is passed on!
- This product is not intended for use by children or similarly protected persons.
- If the product shows any signs of external damage, it must not be put into operation or must be taken out of operation immediately.
- Do not operate any loads on this product which could cause fire if left unattended.
- Risk of fatal electric shock: Never use the product immediately when transferring it from a cold to a warm room. This could possibly cause a short circuit and impair the product’s function. Never touch the product with wet or damp hands.
- Use only in enclosed, well-ventilated and dry rooms. When selecting the installation location, ensure that there is no high humidity, high temperatures, wetness, solvents, flammable gases, dust or vapors.
- Heat generated by operation must be dissipated.
- Do not open the product. If a fault occurs, take it out of operation (disconnect from the mains voltage) and contact an electrician or a qualified vendor.
- Do not plug in one after the other
- Do not operate covered
- Voltage-free only when the plug is pulled out.
Read User Manual Online (PDF format)
Loading......