Xinvouc STG6957KB 4 IN 1 Selfie Speaker Light User Manual
- June 16, 2024
- Xinvouc
Table of Contents
Xinvouc STG6957KB 4 IN 1 Selfie Speaker Light
Fuction Features
Open the selfie stick to take selfie
Before using the selfie function, open your Bluetooth. Make sure Bluetooth is
connected with your mobile phone.
Then you need to stretch the stick to the required length, and clip your phone
with the selfie stick damp. Next, adjust the shooting angle, open the phones
camera function short press the selfie button above the speaker, and you can
complete the selfie function.
Recharge your speaker
Open silicone rubbery dust cap on the top of the machine.
Then insert the end of the charging line into the Micro USB interface(Figure
12), and the other end (the larger one) into the 5V charger or computer USB
interface, after which the machine enters the state of charging.
In the process of charging, the LED power supply light will change from red to
blue.
When the fourth blue light is illuminated the machine is fully charged.
Recharge your mobile phone or other digital devices
Open silicone rubbery dustcap on the top of the machine.
Then insert the end of the charging line into the USB interface (Figure 13),
and the other end into your phone or other digital devices
Bluetooth pairing connection
Press the button on/off”, Bluetooth indicator light keeps flashing means the stereo is in the search of matching. Open your mobile phone Bluetooth function, then find and click the equipment name of “IK-WST001 in Bluetooth device. Then the machine will automatically enter the paring mode. There will be warning tone after the successful pairing. The machine will Automatically enter the sleep mode if it is still unpaired after 3min. Then please restart your Bluetooth for another connection.
- Turn on the speaker and quick double-dick power button (Figure 1) into FM mode.
- Click the flashlight/pause button (Figure 4) to auto search the channel.
- After, press (Figure 2 or Figure 3) to select the channel you want.
Note: Pull out the selfie stick as the antenna for better performance.
- Bluetooth switch/ Selfie button
- Prev. song/ Volume-
- Next song/Volume+
- Flashlight/Pause
- Selfi stick
- Selfie stick clamp
- Hanging buckle
- Mountaineering buckle
- Bluetooth indicator light
- Battery indicator light
- Microphone
- Micro USB charging port
- Power outlet/-disk player
- Micro TF Card
Buttons Operating Instruction
Bluetooth/Selfie Button(Figure 1)
When power off: Long-press 3 sec to power on
When power on:Long-press 3 sec to power off
Mode switch Double-press to play U-disk
Photo mode:Short-press to take photos
Prev. Song VOL-(Figure 2)
Playing music: Short-press to play prev. song
Playing music: Long-press to VOL
Next song/VOL+(Figure 3)
Playing music: Short-press to play next song
Playing music:Long-press to VOL+
Flashlight/Pause(Figure4)
Flashlight: Long-press 3 sec for flashlight on
Flashlight:Long-press 3 sec for flashlight off
Playing music:Short-press for pause
Bluetooth Indicator Light (Figure 9)
Rapidly flashing green: Search for Bluetooth connection
Slowly flashing green:Bluetooth connection established
Battery Indicator Light(Figure 10)
Red (1th): Remaining battery 25%
Blue (2rd): Remaining battery 50%
Blue (3nd): Remainingbattery 75%
Blue (4st): Remaining battery 100%
Low Battery Indicator When the battery is low you will hear the sound of “Du.
Du, and Du”.
Use of USB Disk or TF Card
Open the silicone rubbery dust cap on the top of the machine.
Insert U-disk into the USB slot or Insert TF card into the Micro TF card slot
(Icon 14), and long press the Bluetooth button to open the Bluetooth. Then it
can play the music that stored in the U-disk or TF card.
MIC: Hands-free call
In the Bluetooth connection state, when there is an incoming call, the device
can answer call hands-freely.
Product technical specifications
Speaker size: 40mm
Speaker resistance: 4Ω
Speaker output power: 3W
Power input: DC5V 2.1A
Power output: DC5V 2.1A
Battery type: 18650 lithium-ion battery
Battery capacity: 1200mAh
Notes
- Do not adjust the output voltage higher than the device voltage; otherwise it may cause damage to the equipment. Please be sure of this before using.
- Please use the specified charger.
- Prohibit from short circuit,breaking down or throwing into the fire.
- Do not disassemble the charger and battery to transform.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
RF Exposure Information
The device was evaluated to meet general RF exposure requirements. This
equipment should be installed and used with a minimum distance of 0 mm between
the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>