Dongguan Xinvouc Electronic STG-6826-KB Fast Wireless Charger User Manual

Dongguan Xinvouc Electronic STG-6826-KB Fast Wireless Charger

Fast Wireless Charger User Manual

Thanks for choosing us! This is a smart phone wireless charger that aloes you enjoy the fun of digital products easily. Please kindly read the user manual before using mid keep it for future reference.

Connect to Power Adapter

1. Connect the power adapter to socket.
2. Connect adapter to the USB 2.0 interface, the other micro USB to the wireless charger. Stand by state: LED light is unbright ting Turn on: LED Tight show on 2 seconds then extinctic Charging: LED light show on FOD:LED light twinkling once a second until take foreign objects away Full charging: Green LED show on (Suitable for some models) The involved images are sketch maps, end-products subject to the object entity. Includes: Wireless charger, Charging cable, user’ s manual. AC adapter is excluded, please buy separately or use the mobile phone original adapter if need.

Specification

• Input: DC 5V, 2A DC 9V, 1. 67A DC 9V, 3A DC 12V, 2.2A
• Charging Efficiency: more than 80%
• Charging Distance:3-10MM
• Frequency:110-205KHz
• Wireless Charging Power: 15%/10W/7.5W/5W Compatible
• Standard:Q1

Applicable Devices

1. Devices with built-in wireless charging receiver iPhone 11/11Pro/11Prolax/KR/S/iPhone 9, Samsung $20/ S20-/SamsungS7/S7+/S8/S8+/S9/S9+/S10, Galaxy Note9/ Notel0, Nokia 1520, LG G/GT/N30/V40, Nexus 6/7and more, Xiaom il0, Huawei Nate RS/P30/P40 and more.)
2. Devices with reserved wireless charging interface beside it battery (Samsung Galaxy$3/S4/S5, Note 2/Note 3/Note4)
3. Devices with wireless charging receiver in its protection case (iPhone/ 6/6s/6plus, iPhone 7, etc) Note: Ail devices must be Ql standard.

Wireless Charger

Thank you for using this product of our company. In order to let you experience the product swimmingly, detailed instruction is provided which you can find the product s introduction, usage and other informant  Before using this product please read the manual carefully, so that you can correctly use it, in case of any printing or translation error, we apologize for the inconvenience, As for the content change, we are sorry for no further notice.

Safety information

To prevent injury to yourself and others or damage to your device, read the safety information about your Do not use your device for a while if the device is overheated Prolonged exposure of your skin to an overheated device may cause low temperature burn symptoms, such as red spots and pigmentation.

• Do not store your device near or in heaters, microwaves, hot cooking equipment, or high pressure containers your device may overheat and cause a fire.

• Do not drop or cause an impact to the charger or the device Store your device only on flat surfaces. If your device falls, it may be damaged.

• Do not bite or suck the device

• Doing so may damage the device or cause an explosion. If children use the device, make sure that they use the device properly.

• Keep your device dry Humidity and liquids may damage the parts or electronic circuits in your device.

• If your device is wet, dry the device with a towel and take it to a service centre.

• Do not di assemble, modify, or repair your device Your device may malfunction and your risk of electric shock is increased.

• Any changes or modifications to your device can void your manufacturer’ s warranty, If your

• Do not place too close with magnetic stripe or chip card to avoid magnetic failure Please keep the distance at least 20cm between implantable medical devices and the wireless charger, to avoid potential interference with the medical device Using Environment temperature remains 0-50° C device needs servicing, take your device to Service Centre.

• To turn this apparatus off completely, you must pull the power plug out of the wall socket, Consequently, the power plug must be easily and readily accessible all time.

FCC Waning Statement

Changes or modifications not expressly approved by the party responsible for compliance could Void the users autonomy to operate the equipment. Innis equipment has been tested and Found top comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is Connected. Consult the dealer or an experienced radio TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

RF Exposure

A distance of 15 cm shall be maintained between the antenna and users, and the transmitter may not be co-located with any other transmitter or antenna.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>