timberk T-HC341SLDW Hair Clipper Set Instruction Manual

INSTRUCTION MANUAL
HAIR CLIPPER SET
Model: T-HC341SLDW

IM2022
Dear customer!
We thank you for your wise choice and for a purchase of this timberk device. It will serve you for a long time.

IMPORTANT INFORMATION

Please, read this manual before using the device. This manual contains important information regarding your safety, as well as recommendations concerning the correct use and maintenance of this appliance. Keep this manual together with cash register receipt and, if possible, carton and packaging material. This instruction manual describes different types of this device. The device you purchased may differ slightly from the description in the manual, which does not affect the methods of use and operation. The manufacturer reserves the right to make minor changes to the device without additional notice which is not fundamentally affect its safety, performance and functionality. There may be some misprints in text and digital notations in the present manual.
IMPORTANT!
Important safeguards and descriptions contained in this manual do not include all possible situations that you may experience using the device. The manufacturer is not responsible for damage of the appliance or its parts during transportation, as a result of incorrect installation or voltage fluctuations, as well as when any part of the appliance has been changed or modified.
NOTE
There is a label on the device which has all the necessary technical data and other useful information about the device. Use the appliance only for the purpose specified in this manual.

PRECAUTIONS

When using the hair clipper set, please observe the following precautions. Improper operation while ignoring these precautions can result in an injury to the user and others, as well as damage to their property.

1. Please read this instruction manual carefully before use and keep in a safe place for future reference.
2. Before switching on the appliance for the first time please check if the technical specifications indicated on the unit correspond to the mains parameters.
3. For home use only. Do not use for industrial purposes. Do not use the appliance for any other purposes than described in this instruction manual.
4. Do not use outdoors.
5. Always unplug the appliance from the power supply before cleaning and when not in use.
6. To prevent risk of electric shock and fire, do not immerse the appliance in water or any other liquids.
7. Do not take this product to a bathroom or use near water.
8. The appliance is not intended for use for physically, sensory or mental disabled person (including children) or for person with lack of life experience or knowledge, if only they are under supervision or have been instructed about the use of the unit by responsible person.
9. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Сleaning and user maintenance shall not be made by children without supervision.
10. Children must be under control in order not to be allowed to play with the appliance.Do not leave the appliance switched on when not in use.
11. Do not use other attachments than those supplied.
12. Do not operate after malfunction or cord damage.
13. If the power cord is damaged, it should be replaced with a special cord obtained from the manufacturer or a service center.
14. Never try to repair this appliance by yourself. In case of failure, contact the nearest seller.
15. Keep the cord away from sharp edges and hot surfaces.
16. Do not place or store the appliance where it can fall or be pulled into a tub or sink.
17. Do not pull, twist, or wrap the power cord around the appliance.
18. Never insert any objects into openings in the appliance housing.
19. Do not put operating appliance on any surface, it may cause injury or damage.
20. Do not use the appliance with damaged comb, or with teeth missing from the blades as injury may occur.
21. NOTE: KEEP THE BLADES OILED.
22. The instrument must be powered only by a safe, ultra-low voltage marked on the instrument.
23. Do not use the hair clipper when the skin is infected.
24. Do not use the hair clipper on animals.
25. If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature for at least 2 hours before turning it on.

DESIGNATION

The device is designed for hair cutting and beard modeling. The clipper is equipped with combs that adjust the length of the cut, and additional attachments to achieve the desired result.

SPECIFICATIONS

Specifications of the device are shown in Table 1.
Table 1

DEVICE DESCRIPTION

Fig 1*

1. Removable beard design trimmer
2. On/Off Button
3. Device display
4. Removable nose and ear trimmer
5. Removable haircut attachment
6. Removable T-shaped knife block for edging and modeling
7. Removable shaving head
8. Removable combs for length adjustment (3/6/9/12 mm)
9. USB cord
10. Cleaning brush
11. Oilcan

• The picture is for reference only and may differ from the actual product

DELIVERY SET

1. Hair clipper set – 1 pc.
2. Beard design nozzle – 1 pc.
3. Nose trimmer – 1 pc.
4. Shaving nozzle – 1 pc.
5. Haircut nozzle – 1 pc.
6. T-shaped knife block – 1 pc.
7. Detachable comb – 4 pcs.
8. Cleaning brush – 1 pc.
9. Oiler – 1 pc.
10. USB cord – 1 pc.
11. Warranty card – 1 pc.
12. Instruction manual – 1 pc.
13. Packaging – 1 pc.

BEGINNING

• The device is designed for cutting hair.
• The blades of the machine should thoroughly lubricated before the first use.
• The battery must be fully discharged and charged. The charging time is 2 hours. A full battery charge lasts for 1.5 hours of operation. Recharge the battery at least once every 6 months, even if the machine is not in use. You can use the machine while recharging.
• The machine can be charged using the charging cord. Connect the USB input of the cord to the USB port, and the other end to the connector for connecting the power cord on the device.
• The display will blink indicating the charging process.

OPERATION

1. Install the required nozzle.
2. To turn on the machine, press the on/off button.
3. During operation, the display will show the charging level as a percentage.
4. At the end of the operation, turn off the machine, press the on/off button again.

REMOVING AND INSTALLING ATTACHMENTS![timberk T-HC341SLDW Hair Clipper Set

• parts2](https://manuals.plus/wp-content/uploads/2024/01/timberk-T-HC341SLDW- Hair-Clipper-Set-parts2.jpg) Removal and installation of cutting blocks

  • To remove the cutting block, press up on the teeth of the cutting block and remove it from the handle.
  • To install the cutting unit, insert the foot of the cutting unit into the guide groove in front and press the back side of the cutting unit in the direction of the device (until “click”).

Removing the shaving nozzle and nose and ear trimmer

• Place your finger on the arrow on the back of the nozzle and slide the nozzle off the handle in the direction of the arrow.

DESCRIPTION OF ATTACHMENTS
Attachments for hair cutting and beard modeling:
For cutting hair and beard, use a haircut attachment (0.5 mm cut length) with replaceable combs (3/6/9/12 mm), a T-shaped knife block, a trimmer for design.
Nozzle for cutting hair in the nose and ears:
To cut the hair in the nose and ears, use the trimmer attachment.

1. Install the appropriate attachment on the machine before starting the haircut.

2. Turn on the device and point it carefully in the direction of your nostrils. Remove the hair with neat, circular movements of the trimmer.
   ATTENTION: Never insert the trimmer deeper than 0.5 cm into the ear or nose, as you may damage the eardrums or mucous membrane.

3. Turn off the device at the end of the procedure.

Shaving nozzle for facial hair
To remove the hair remaining after the main stage of beard cutting, use a shaving nozzle.

1. Install the appropriate attachment on the machine before starting the haircut.
2. Stretch the skin with your free hand and smoothly move the razor in the direction opposite to hair growth.
3. During shaving, do not put too much pressure on the razor, strong pressure can cause damage to the razor.

REMINDERS

• It is better to cut dry hair.
• Comb hair carefully before cutting.
• Always take off a little at a time.
• For even cutting do not force the clipper. Also remember to comb the hair more frequently to remove trimmed hair and check for uneven strands.
• Cutting options are given in fig. 1.

CARE AND CLEANING

1. Turn off the machine and disconnect it from the mains.
2. Remove the nozzles as indicated in the section removing and installing the nozzles
3. Clean the nozzles and the machine from the hair with the supplied brush. Additionally, removable parts can be rinsed under water. Let all the parts dry.
4. Wipe the case with a dry soft cloth.
5. Install the necessary nozzle on the typewriter, as indicated in the section removing and installing the nozzles.
6. To ensure long-term and reliable operation of the machine, after each haircut, the blades should be regularly lubricated with special oil.

TRAVEL LOCK

During trips, you can set a lock on the device. Road blocking prevents accidental activation of the machine.
Tuning on travel lock
To use lock mode, press and hold the on/off button for 3 seconds. When travel lock is on, the travel lock indicator light flashes.
Turning off travel lock
Press and hold the on/off button for 3 seconds.
After travel lock is deactivated, the travel lock indicator will turn off.
NOTE!
The travel lock is automatically turns off when the shaver is connected to the charger.

STORAGE

1. Keep the appliance in a cool, dry place
2. The blades must be oiled for storage period.

REMOVING THE BATTERY

1. Battery should be removed from the appliance before its utilization
2. Unplug the appliance from mains socket and switch it off before removing the battery.

TROUBLESHOOTING

hair with the precision trimming head and move the appliance against the direction of hair growth. Make sure that the appliance is fully in contact with the skin
The appliance does not work as well as it should| Hair may be stuck in the shaving head| Clean the shaving head (see chapter ‘Care and Cleaning’).
The battery is empty| Recharge the device
The appliance pulls out the hair.| You move the appliance too fast| Do not move the appliance too fast
The appliance works, but the result is uneven| You press the appliance onto the skin too hard| Do not press the appliance onto the skin too hard, as this may cause the hair length after shaving to be shorter than the indicated hair length.
The shaving head is not in full contact with the skin| When you use the device, always make sure it is fully in contact with the skin. Always move the appliance against the direction of hair growth. As not all hair grow in the same direction, this means that you have to move the
appliance up, down and sideways.
The appliance does not work| The battery is empty| Recharge the device
Skin irritation appears after shaving| Shaving head (shaving surface) defective or dull| Replace the Shaving head (shaving surface)
The skin is not accustomed to the new device| It takes approximately 2-3 weeks for the skin to completely get used to the new device
The device is not charging| Ambient temperature is not correct| Do not charge the device at temperatures below 0 °C or above 40 °C.
Usage time after fully charged is less than 60 minutes| Engine load increases if shaving head (shaving surfaces) has not been cleaned for long time| Clean shaving heads (shaving surfaces) and/or hair
compartment

UTILIZATION RULES

The symbol on the unit, packing materials and/or documentations means used electrical and electronic units should not be toss in the garbage with ordinary household garbage. These units should be pass to special receiving point.
For additional information about actual system of the garbage collection, address to the local authority.
Valid utilization will help to save valuable resources and avoid negative work on the public health and environment which happens with incorrect using garbage.
**** The symbol on the unit, packing materials and/or documentations means the battery used in this product not be toss in the garbage with ordinary household garbage.

****www.timberk.ru

Documents / Resources

| timberk T-HC341SLDW Hair Clipper Set [pdf] Instruction Manual
T-HC341SLDW Hair Clipper Set, T-HC341SLDW, Hair Clipper Set, Clipper Set, Set
---|---

References

• Timberk - Официальный сайт бренда бытовой техники
• Dictionary

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>