LODVIE Wireless Optical Mouse User Manual

LODVIE Wireless Optical Mouse

Packing List

Diagram

1. Left Button
2. Right Button
3. Scroll Wheel
4. DPI Button
5. Forward Button
6. Backward Button
7. Bluetooth Pairing Button

Features

1. Latest Bluetooth Technology. Equipped with Bluetooth 3.0 and Bluetooth 5.0 Technology. Stronger compatibility and fast re-connection.
2. 5 Levels DPI. 800/l 200/1600/2000/2400. Precise positioning and easy to control.
3. Power-saving mode: the mouse will automatically enter into sleep mode without operation of 30min. Press any button to wake it up.

Instructions

1. Place one AA dry battery into the mouse with the correct polarity.
2. Press the pairing button on the bottom of the mouse for 3s and red LED light under DPI button will flash, which means the mouse enters into Bluetooth paring mode.
3. Turn on the Bluetooth on your laptop. For Windows 7 or earlier systems, please select
   “BT3.0 Mouse”. For Windows 8 or later systems, iOS, or macOS, please select “BT5.0 Mouse”. You can use after a successful connection.

Note
“Bris the abbreviation of Bluetooth. For example, “BT3.0” means “Bluetooth 3.0”.

Solutions to Connection Problems

1. Empty the Bluetooth list on your computer.
2. Take out the battery and replace it into the mouse with the correct polarity.
3. Long press the Bluetooth pairing button for 3s and release until the DPI button flashes.
4. Turn on the Bluetooth on your laptop. For Windows 7 or earlier systems, please select
5. “BT3.0 Mouse”. For Windows 8 or later systems, iOS and macOS, please select “BT5.0 Mouse”. You can use it after a successful connection.

Note

If the product is still unworkable after above solutions, you could repeat those steps for a few times. If your problem can’t get solved yet, please contact our Customer Service for help ( Email : [email protected])

FCC STATEMENT

Any Changes or modifications not expressly approved by the party responsible for compliance could void the use(s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1 ) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>