LeapFrog 614600 Leapster Ultra Game Instruction Manual
- June 16, 2024
- LeapFrog
Table of Contents
LeapFrog 614600 Leapster Ultra Game Instruction Manual
INTRODUCTION
Thank you for purchasing the Leapster® Ultra!
PRODUCT FEATURES
-
Home Button
Press the Home Button to quit a level, quit the game, or return to the previous Menu screen. -
Help Button
Press the Help Button to hear hints and tips on how to play the game or navigate the Menu screen. -
Spinner
Turn the Spinner in game play as needed. The Spinner turns in both directions. -
D-PAD
Press the D-Pad left, right, up, or down in game play as needed. Use this control to scroll through menus or select games to play. -
A Button
Press the A Button to confirm and perform game specific functions. -
B Button
Press the B Button to return to previous menu or step. Also to perform game specific functions. -
Volume Button
Press the + on the Volume Button to increase the volume and press the – on the Volume Button to decrease the volume. -
Power Button
Press and hold the Power Button to turn the system on or off.
INCLUDED IN THE PACKAGE
- Leapster® Ultra
- Quick Start Guide
WARNING
All packing materials, including tape, plastic sheets, packaging locks,
removable tags, cable ties, cords and packaging screws are not part of this
toy, and should be discarded for your child’s safety.
NOTE
Please save this Instruction Manual as it contains important information.
UNLOCK THE PACKAGING LOCKS
- Rotate the packaging locks counterclockwise several times.
- Pull out the packaging locks and discard.
INSTRUCTIONS
Battery Installation
- Find the two separate battery covers located on the bottom of the unit, use a screwdriver to loosen the screw and then open the battery covers.
- Install 4 new AA (AM-3/LR6) batteries following the diagram inside the battery box. (For best performance, alkaline batteries or fully charged Ni-MH rechargeable batteries are recommended.)
- Replace the battery covers and tighten the screw to secure.
NOTE: Make sure the unit is turned OFF when attempting to replace the batteries.
Game Profile Reset
To reset a game profile to start it over, highlight a saved profile and press the following buttons: B + Home + Help + Left + Right + B + B + Home. This will reset the selected profile.
WARNING :
Adult assembly required for battery installation.
Keep batteries out of reach of children.
IMPORTANT: BATTERY INFORMATION
- Insert batteries with the correct polarity (+ and -).
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
- Only batteries of the same or equivalent type as recommended are to be used.
- Do not short-circuit the supply terminals.
- Remove batteries during long periods of non-use.
- Remove exhausted batteries from the toy.
- Dispose of batteries safely. Do not dispose of batteries in fire.
RECHARGEABLE BATTERIES
- Remove rechargeable batteries (if removable) from the toy before charging.
- Rechargeable batteries are only to be charged under adult supervision.
- Do not charge non-rechargeable batteries.
CARE & MAINTENANCE
- Keep the unit clean by wiping it with a slightly damp cloth.
- Keep the unit out of direct sunlight and away from any direct heat sources.
- Remove the batteries if the unit will not be in use for an extended period of time.
- Do not drop the unit on hard surfaces and do not expose the unit to moisture or water.
- If the unit is not working properly, install a brand new set of batteries.
TROUBLESHOOTING
If for some reason the program/activity stops working or malfunctions, please follow these steps:
- Turn the unit Off.
- Interrupt the power supply by removing the batteries.
- Let the unit stand for a few minutes, then replace the batteries.
- Turn the unit On. The unit should now be ready to use again.
- If the unit still does not work, install a new set of batteries.
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency interference. It
should revert to normal operation when the interference stops. If not, it may
become necessary to turn the power Off and back On, or remove and reinstall
the batteries.
In the unlikely event of an electrostatic discharge, the unit may malfunction
and lose memory, requiring the user to reset the device by removing and
reinstalling the batteries.
IMPORTANT NOTE:
If the problem persists, please call our Consumer Services Department
at 1-800-701-5327 in the U.S. and
Canada, or email support@leapfrog.com. Creating and
developing LeapFrog products is accompanied by a responsibility that we take
very seriously. We make every effort to ensure the accuracy of the
information, which forms the value of our products. However, errors sometimes
can occur. It is important for you to know that we stand behind our products
and encourage you to contact us with any problems and/or suggestions you might
have. A service representative will be happy to help you.
NOTE
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
CAN ICES-003(B)/NMB-003(B)
CONSUMER SERVICES
Creating and developing LeapFrog® products is accompanied by a
responsibility that we at LeapFrog® take very seriously.
We make every effort to ensure the accuracy of the information, which forms
the value of our products. However, errors sometimes can occur. It is
important for you to know that we stand behind our products and encourage you
to call our Consumer Services Department with any problems and/or suggestions
that you might have. A service representative will be happy to help you.
UK Customers:
Phone: 01702 200244 (from UK) or +44 1702 200244 (outside UK)
Website:
www.leapfrog.co.uk/support
Australian Customers:
Phone: 1800 862 155
Website: support.leapfrog.com.au
NZ Customers:
Phone: 0800 400 785
Website: support.leapfrog.com.au
PRODUCT WARRANTY/ CONSUMER GUARANTEES
UK Customers:
Read our complete warranty policy online at
leapfrog.com/warranty.
Australian Customers:
VTECH ELECTRONICS (AUSTRALIA) PTY LIMITED – CONSUMER GUARANTEES Under the
Australian Consumer Law, a number of consumer guarantees apply to goods and
services supplied by VTech Electronics (Australia) Pty Limited. Please refer
to leapfrog.com/en-au/legal/warranty for further information.
Visit our website for more information about our products, downloads,
resources and more.
leapfrog.com
leapfrog.ca
leapfrog.com.au
Read our complete warranty and legal policies online at
leapfrog.com/legal
LeapFrog Enterprises, Inc.,
A subsidiary of VTech Holdings Limited.
TM & © 2023 LeapFrog Enterprises, Inc.
All rights reserved.
IM-614600-000
Version:0
US CAN AUS
References
- LeapFrog Customer Support | Help & Support For LeapFrog Products
- Kids Learning Games | Educational Toys & Kids Tablets | LeapFrog
- Kids Learning Games | Educational Toys & Kids Tablets | LeapFrog
- Warranty
- Support : LeapFrog
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>