Millenium LST-310 Lighting Stand User Manual
- June 16, 2024
- Millenium
Table of Contents
Millenium LST-310 Lighting Stand
Product Information
Specifications
- Metal construction with crossbar for up to four spotlights
- Extension tubes with internal chains to prevent tubes from being pulled too far apart
- Extension tubes secured by safety bolts and cotter pin
- Mounting for crossbar with TV spigot
- Crossbar length : 1.20 m
- Maximum weight-bearing capacity : 18 kg
- Minimum height : 1.77 m
- Maximum height : 3.10 m
- Maximum vertical lift : 1.33 m
- Weight : 11 kg
FAQ
- What is the maximum weight this lighting stand can hold?
- The maximum weight-bearing capacity of the LST-310 Lighting Stand is 18 kg.
- What is the minimum and maximum height of the stand?
- The minimum height of the stand is 1.77 m, and the maximum height is 3.10 m.
- Is this stand suitable for outdoor use?
- The user manual does not specify if the stand is suitable for outdoor use. It is recommended to contact the manufacturer for further information.
Product Usage Instructions
Safety Instructions
DANGER! Risk of injury and choking hazard for children!
CAUTION! Risk of injury due to tipping of the stand during loaded transport!
If the stand is moved without having removed the installed devices, the stand may tip over and cause injuries and property damage. Remove the installed devices before transporting the stand.
Operation
- Unpack and check carefully for any transportation damage before using the product.
- Keep the equipment packaging for future use.
- To protect the product against vibration, dust, and moisture during transportation or storage, use the original packaging or suitable packaging material.
General information
This document contains important instructions for the safe operation of the product. Read and follow the safety instructions and all other instructions. Keep the document for future reference. Make sure that it is available to all those using the product. If you sell the product to another user, be sure that they also receive this document. Our products and documentation are subject to a process of continuous development. They are therefore subject to change. Please refer to the latest version of the documentation, which is ready for download under www.thomann.de.
Symbols and signal words
| Signal word | Meaning |
|---|---|
| DANGER! | This combination of symbol and signal word indicates an |
immediate dangerous situation that will result in death or serious injury if
it is not avoided.
CAUTION!| This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in minor injury if it is not
avoided.
NOTICE!| This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and environmental damage
if it is not avoided.
|
Warning signs| Type of danger
| Warning – danger zone.
In this section, you will find an overview of the meaning of symbols and signal words that are used in this document.
Safety instructions
Intended use
This light stand is intended to be used for the stable mounting and height- adjustable positioning of spotlights. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
This device may be used only by persons with sufficient physical, sensorial, and intellectual abilities and having corresponding knowledge and experience. Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety.
Safety
DANGER!
Risk of injury and choking hazard for children! Children can suffocate on packaging material and small parts. Children can injure themselves when handling the product. Never allow children to play with the packaging material and the product. Always store packaging material out of the reach of babies and small children. Always dispose of packaging material properly when it is not in use. Never allow children to use the product without supervision. Keep small parts away from children and make sure that the product does not shed any small parts that children could play with.
CAUTION!
Risk of injury due to tipping of the stand during loaded transport! If the stand is moved without having removed the installed devices, the stand may tip over and cause injuries and property damage. Remove the installed devices before transporting the stand.
CAUTION!
Risk of injury due to tipping of stand on an unsuitable ground! When the stand is installed on soft or uneven ground, the stand may tip over and cause injuries and property damage. Install the stand only on even and solid ground.
CAUTION!
Risk of injury due to tipping of the stand from excessive loading! In case of excessive loading, the stand might tip over, causing injury and property damage. Never exceed the specified maximum load for the stand.
CAUTION!
Risk of injury due to the tipping of the stand from excessive or one-sided loading of the truss beam. In case of excessive or one-sided loading of the truss beam the stand might tip over, causing injury and property damage. Never exceed the specified maximum load for the truss beam. Spread the weight of the mounted devices evenly on the truss beam.
NOTICE!
Possible staining due to plasticizer in rubber feet! The plasticizer contained in the rubber feet of this product may react with the coating of the floor and cause permanent dark stains after some time. If necessary, use a suitable mat or felt slide to prevent direct contact between the device’s rubber feet and the floor.
Features
Special characteristics:
- Metal construction with crossbar for up to four spotlights
- Extension tubes with internal chains to prevent that the tubes from being pulled too far apart
- Extension tubes secured by safety bolts and cotter pin
- Mounting for crossbar with TV spigot
- Crossbar : 1.20 m
- Maximum weight-bearing capacity : 18 kg
- Minimum height : 1.77 m
- Maximum height : 3.10 m
- Maximum vertical lift : 1.33 m
- Weight: 11 kg
Operation
Unpack and check carefully there is no transportation damage before using the product. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.
CAUTION!
Risk of injury due to tipping of the stand during loaded transport! If the stand is moved without having removed the installed devices, the stand may tip over and cause injuries and property damage. Remove the installed devices before transporting the stand.
CAUTION!
Risk of injury due to tipping of stand on an unsuitable ground! When the stand is installed on soft or uneven ground, the stand may tip over and cause injuries and property damage. Install the stand only on even and solid ground.
CAUTION!
Risk of injury due to tipping of the stand from excessive loading! In case of excessive loading, the stand might tip over, causing injury and property damage. Never exceed the specified maximum load for the stand.
CAUTION!
Risk of injury due to the tipping of the stand from excessive or one-sided loading of the truss beam. In case of excessive or one-sided loading of the truss beam the stand might tip over, causing injury and property damage. Never exceed the specified maximum load for the truss beam. Spread the weight of the mounted devices evenly on the truss beam.
NOTICE!
Possible staining due to plasticizer in rubber feet! The plasticizer contained in the rubber feet of this product may react with the coating of the floor and cause permanent dark stains after some time. If necessary, use a suitable mat or felt slide to prevent direct contact between the device’s rubber feet and the floor.
Comply with regulations
When installing and operating, make sure to follow the standards and regulations that apply in your country.
Setup
- Unfold the feet of the stand until the cross braces are in a horizontal position.
- Fix this position with the safety screw on the carriage to which the three feet are attached.
- Loosen the two safety screws on the crossbar mounting at the upper end of the stand, attach the crossbar and tighten it with the two safety screws on the mounting.
- Pull out the two safety bolts and loosen the two safety screws on the extension tubes.
- Pull out the upper extension tube to the required height, insert the safety bolt through the appropriate grid holes and slide the safety cotter through the hole in the safety bolt.
- Fix the position of the upper extension tube with the safety screw on the upper tube clamp.
- Pull out the lower extension tube to the required height, insert the safety bolt through the appropriate grid holes and slide the safety cotter through the hole in the safety bolt.
- Fix the position of the lower extension tube with the safety screw on the lower tube clamp.
- Tighten the Allen screws on the upper and lower tube clamps with the supplied Allen key.
- Attach up to four spotlights to the crossbar. Observe the instructions of the respective manufacturers. The maximum load capacity of 18 kg in total must not be exceeded.
Disassembly
- Remove the spotlight(s).
- Loosen the Allen screws on the upper and lower tube clamp using the supplied Allen key.
- Loosen the safety cotter and pull out the safety bolt on the lower extension tube.
- Loosen the safety screw on the lower tube clamp and slide the lower extension tube all the way down.
- Tighten the safety screw on the lower tube clamp.
- Loosen the safety cotter and pull out the safety bolt on the upper extension tube.
- Loosen the safety screw on the upper tube clamp and slide the lower extension tube all the way down.
- Tighten the safety screw on the upper tube clamp.
- Loosen the two safety screws on the crossbar mounting and detach the crossbar.
- Loosen the safety screw on the carriage to which the three feet are attached.
- Fold up the feet of the stand.
- Pack the individual parts of the system in their original packaging if possible, and store the package in a dry place protected against moisture.
Technical specifications
| Height, max. | 3.10 m |
|---|---|
| Adjustable tripod height | 1,77 m … 3,10 m |
| Footprint | 1.44 m |
| Single truss length | 1.20 m |
| Tripod tube diameter | 34.7 mm |
| Truss tube diameter | 30 mm |
| Mounting slots | 4 |
| Holder type | Flange, 28 mm, for TV spigot |
| Load, max. (with centric load) | 18 kg |
| Transport dimensions (B × H × T) | 150 mm × 1400 mm × 150 mm |
| Weight | 8 kg |
| Colour | black |
Further information
| Stand type | Lighting stand |
|---|---|
| Incl. crossbar | Yes |
| Crank | No |
Protecting the environment
Disposal of the packing material
Environmentally friendly materials have been chosen for the packaging. These materials can be sent for normal recycling. Ensure that plastic bags, packaging, etc. are disposed of in the proper manner.
Do not dispose of these materials with your normal household waste, but make
sure that they
are collected for recycling. Please follow the instructions and markings on
the packaging.
Observe the disposal note regarding documentation in France.
Thomann GmbH
- Hans-Thomann-Straße 1 96138 Burgebrach Germany
- Telephone : +49 (0) 9546 9223-0
- Internet : www.thomann.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>