Tower T513005 Vacuum Cleaner Instruction Manual
- June 16, 2024
- TOWER
Table of Contents
Tower T513005 Vacuum Cleaner
Specifications
- Model: [Model Name]
- Power: [Power Rating]
- Weight: [Weight]
- Cord Length: [Cord Length]
- Bag Capacity: [Bag Capacity]
Assembly
Before using the vacuum, follow these steps to assemble it:
- Unbox the vacuum and remove all packaging materials.
- Attach the handle to the main body of the vacuum by aligning the grooves and firmly pushing it in.
- Connect the hose to the designated port on the vacuum.
- Insert the desired attachment (e.g., brush, crevice tool) onto the end of the hose.
Powering On
To turn on the vacuum, follow these steps:
- Plug the power cord into a suitable electrical outlet.
- Locate the power button on the vacuum and press it to turn on the device.
Vacuuming
To effectively use the vacuum for cleaning, follow these guidelines:
- Select the appropriate suction power level based on the type of surface you are cleaning. Refer to the user manual for guidance on different power settings.
- Hold the handle firmly and push the vacuum back and forth over the desired area, ensuring proper coverage.
- For stubborn dirt or debris, use the attachments provided to reach corners, crevices, or upholstery.
- Regularly check the bag capacity indicator and empty or replace the bag as needed.
Trouble-shooting Guide
| Problem | Possible Solution |
|---|---|
| The vacuum will not work |
-
Ensure the vacuum cleaner is plugged into a mains outlet. Check that there are no blockages to the dust tank or filter and remove as necessary.
-
This appliance is equipped with a motor protective thermostat. If for some reason it overheats, the thermostat will automatically turn the suction motor off. Should this occur, allow it to cool for 1 hour, then empty the dust container and clean all the filters.
Vacuum will not pick-up or suction power is weak|
-
The dust container may be full, or the filter may require cleaning. Empty the dust container and clean the filter.
-
There may be blockages in the filter or dust tank. Check for blockages and clean the filter and dust tank.
-
An attachment may have been installed which does not belong to the vacuum cleaner. Make sure that all the attachments belong to the model of vacuum cleaner that you are using. The use of accessory attachments other than those supplied by the manufacturer is not recommended
Dust is escaping from the vacuum|
- The filter may be installed incorrectly, or the dust container may be full.
- Empty the dust container and reassemble the filter system.
There is a strange noise coming from
the vacuum.
|
- The airflow may be restricted or blocked. Check for blockages and clean the filter and pole. If the problem persists, contact the Customer Support team.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>