Tower Housewares T938022BLK 65 Litre Ozone Sensor Bin Instruction Manual
- June 1, 2024
- TOWeR Housewares
Table of Contents
- Tower Housewares T938022BLK 65 Litre Ozone Sensor Bin
- Product Usage Instructions
- STRUCTURE OF THE SENSOR BIN
- IMPORTANT SAFETY INFORMATION
- OPERATING INSTRUCTIONS
- BATTERIES
- CARE & USE
- GUARANTEE
- TERMS AND CONDITIONS
- SPARE PARTS INFORMATION
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Tower Housewares T938022BLK 65 Litre Ozone Sensor Bin
Specifications:
- Product: Tower 65 Litre Ozone Sensor Bin
- Capacity: 65 Litres
- Power Source: 6 x AA Batteries (not included)
- Filter Type: Carbon Filter
Product Usage Instructions
Installing Batteries:
To use the sensor bin, insert 6 x AA batteries into the corresponding
compartment inside the sensor bin lid:
- Locate the battery compartment and remove the cover flap.
- Insert 3 x AA batteries on each side of the casing for a total of 6 x AA batteries.
- Ensure the contacts on the casing line up with the contacts inside the compartment.
- Replace the cover flap on the battery compartment.
Installing Carbon Filter:
To use the sensor bin, install the carbon filter:
- Turn the sensor bin lid upside down and locate the filter compartment on the underside.
- Open the filter compartment lid by pulling it firmly up and away from the main body of the unit.
FAQ:
-
Q: How do I register for the extended guarantee?
A: You can register your extended guarantee online at www.towerhousewares.co.uk. -
Q: What should I do before first use of the product?
A: Before first use, remove the product from the box, remove the packaging, assemble as per instructions, and dispose of the packaging responsibly. -
Q: What should I do if the unit does not turn on after installing batteries?
A: If the unit does not turn on after installing batteries, ensure that the contacts on the battery casing align properly with the contacts inside the battery compartment.
STRUCTURE OF THE SENSOR BIN
- Sensor bin lid
- Battery compartment/filter compartment (inside of unit)
- Open/close button / Ozone Filtration On/Off button
- Bin body
- Retaining ring
- Feet
Register Your Extended Guarantee online at www.towerhousewares.co.uk
Thank you for purchasing a Tower 65 Litre Ozone Sensor Bin. We hope you have years of hassle-free cleanliness with your new purchase.
IMPORTANT SAFETY INFORMATION
Please read these notes carefully BEFORE using your Tower product.
- Safety First! To avoid suffocation, keep wrappers away from babies and children.
BEFORE FIRST USE
Read all instructions and safety information carefully before first use. Please retain this information for future reference.
- Remove the product from the box.
- Remove any packaging from the product.
- Assemble the product as detailed in the relevant section below.
- Please retain all packaging until you have checked and counted all the parts and the contents against the parts list.
- Dispose of the packaging responsibly.
NOTE : Save these instructions for future reference. This product is intended for household use
OPERATING INSTRUCTIONS
Note : If required, refer to the parts diagram on page 2
Installing the Batteries
To use the sensor bin, start by inserting 6 x AA batteries into the
corresponding compartment inside the sensor bin lid. To do this, carry out the
following steps:
- Locate the battery compartment and remove the cover flap.
- Remove the battery casing from the battery compartment and insert 3 x AA batteries (not included) on each side of the casing (3 at the top and 3 at the bottom) for a total of 6 x AA batteries.
- Place the battery casing back into the battery compartment. Ensure the contacts on the casing line up with the contacts inside the compartment, otherwise the unit will not work.
- If the casing has been inserted correctly, the lights on the underside of the bin lid and the unit’s LED control panel will briefly light up to show it is on. If this does not occur, take out the battery casing and re-insert it into the battery compartment, ensuring the contacts line up.
- Once the batteries have been correctly installed, replace the cover flap onto the battery compartment, ensuring it is secured into place.
- The unit is now ready for normal use.
Installing the Carbon Filter
To use the sensor bin, start by installing the filter. To do this, carry out
the following steps:
- Turn the sensor bin lid upside down and locate the filter compartment on the underside of the lid.
- Open the filter compartment lid by holding one of the sides and pulling it firmly up and away from the main body of the unit, as shown in the image below. DO NOT attempt to pull the filter cover out by holding onto the top or bottom, as this might damage the unit.
- Once the filter compartment is open, place one of the included carbon filters inside it and replace the cover, ensuring it clicks into place.
- The carbon filter is now ready for normal use.
Note : For optimal performance, we recommend replacing the Ozone Filter Fresh carbon filter every three months
Installing the Retainer Ring
- Place the bin liner in the centre of the retainer ring. Fold the top of the bag over the edge of the retainer ring, then tuck the edges back into the bin.
- With the retainer ring and bag firmly secured, place the lid back onto the sensor bin. The unit is now ready for normal use.
Using the Sensor Bin
-
Once the batteries and filter have been correctly inserted, press and hold the On/Off button for five seconds to activate the automatic sensor function, as shown in the picture below. The five blue LED indicators on the unit’s control panel will progressively illuminate from right to left to show this function has been activated, as shown in the image below.
Note : Keep the button pressed until all five indicators are illuminated
Note : Once the sensor function is activated, the five blue LEDs will progressively illuminate every time the sensor lid is activated, and progressively de-illuminate as it closes. -
Press and hold this button again while the bin is in operation to deactivate the automatic sensor function. The five blue LED indicators on the unit’s control panel will progressively de-illuminate from left to right to show this function has been activated.
The Ozone Filter Fresh Function
This unit is equipped with Ozone Filter Fresh technology, which helps reduce
bacteria and odours.
Press and hold the Filter button to activate the Ozone Filter Fresh
technology. The five blue LED indicators on the unit’s control panel will
progressively illuminate from left to right to show this function has been
activated. (The sensor bin is now in the Ozone 60 second filter fresh cycle)
Note : Keep the button pressed until all five indicators are illuminated.
BATTERIES
- The batteries can last 3-6 months based on the bin lid opening and closing 20 times a day.
- High alkaline batteries can last up to 2 years on standby only.
CARE & USE
- Do Not apply any external power to the lid when it is in use.
- Do not press on the lid when it is opening.
- Do not manually open the lid as it may damage it.
- ONLY use type AA batteries and remove them once they have run out to prevent leakage. If the bin fails to operate normally, it may mean the batteries are running low, or need replacing. Please avoid mixing brands, or using old batteries.
- Avoid staying in sensing mode for an unduly long time to prolong the life of the motor and batteries.
- Do Not use water to rinse bin lid or battery compartment. You can wipe it with a slightly damp cleaning cloth when the power is off.
- DO NOT IMMERSE IN WATER.
- Do not use harsh abrasive detergents or scouring pads to clean the main plastic body.
- Avoid using the bin in a moist or steamy environment.
- Keep the inductive window away from direct sunlight or lamplight.
- Do not place the bin close to high-frequency electronic products, i.e.: microwave ovens, energy-saving lamps, or remote controls, etc.
- Avoid placing the bin in a contained space and ensure that any obstacles don’t block the inductive window within a 2-metre distance.
GUARANTEE
- This product is guaranteed for 12 months from the date of original purchase.
- If any defect arises due to faulty materials of workmanship, the faulty products must be returned to the place of purchase.
- Refund or replacement is at the discretion of the retailer.
- The standard one-year guarantee is only extended to the maximum available for each particular product upon registration of the product within 28 days of purchase.
- If you do not register the product with us within the 28-day period, your product is guaranteed for 1 year only
VALIDATING YOUR 5 YEAR GUARANTEE
To validate your extended warranty, please visit:
www.towerhousewares.co.uk and register
with us online.
Alternatively, call our customer registration line: +44 (0)844 984 0055
Please note that length of extended warranty offered is dependent on product
type and that each qualifying product needs to be registered individually in
order to extend its warranty past the standard 1 year.
TERMS AND CONDITIONS
- The product must be returned to the retailer with proof of purchase.
- The product must be installed and used by the instructions contained in this booklet.
- It must be used only for domestic purposes.
- It does not cover wear and tear, damage, misuse or consumable parts.
- RKW has limited liability for incidental, or consequential loss or damage.
This guarantee is valid in the UK and Eire Only.
SPARE PARTS INFORMATION
Should you encounter problems, or require a replacement part, please consult the table below and then contact our Customer Services Department on: +44 (0)844 984 0055.
- CODE DESCRIPTION
- TS4036 Silicone Battery Cover
- TS4037 Set of 2 Carbon Filter Replacements
- TS4038BLK Black Ozone Bin Lid
- TS4038COP Copper Ozone Bin Lid
- TS4038GRY Grey Ozone Bin Lid
- TS4038SS S/Steel Ozone Bin Lid
- TS4038WHT White Ozone Bin Lid
Your warranty becomes void should you decide to use non-tower spare parts. The
spare part is guaranteed for one year from the date of purchase.
Any necessary spare parts may also be purchased online from:
www.towerhousewares.co.uk
CUSTOMER SERVICES
- Should you have a problem with your appliance, or need any spare parts, please call our Customer Services Department on: +44 (0)844 984 0055
- It is important to retain the retailer’s receipt as proof of purchase, and we suggest you staple it to this back cover for future reference.
- Please make a note of the 65L Ozone Sensor Bin serial number and model number (you will find these on the box it came in).
- Serial No.
- Model No.
Thank you!
We hope you enjoy your product for many years. As a thank you for purchasing
one of our fantastic products, we are giving you 5 years peace of mind.
To receive your 5 year guarantee, register your product online by visiting:
www.towerhousewares.co.uk
Should you have a problem or need any spare parts, please call our
Customer Service Department on:
+44 (0)844 984 0055
great british design, innovation and excellence since 1912
Designed, developed and distributed throughout the UK by RKW Ltd.
Helpline: +44 (0)844 984 0055
Register Your Extended Guarantee online at
www.towerhousewares.co.uk
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>