motorola Motobuds Charge Wireless Earbuds User Guide
- June 4, 2024
- Motorola
Table of Contents
motorola Motobuds Charge Wireless Earbuds
Model No. : Motobuds Charge, MOTO BUDS CHARGE
-
Frequency Band: 2.402 – 2.480GHz
Maximum RF power: 6 dBm -
Working temperature: -10°C ~ 45°C
-
FCC ID: 2ARRB-MBCHR
-
IC: 20353-MBCHR
Charging:
Fully
charge before use
The device can be powered through a USB-C from any CE compliant power source
that implement the European interface as requested by EN 301 489-52.
Pairing:
- Ensure both buds are inside the charging case and takeout both buds. The buds will flash blue and red.
- Select “Motobuds Charge” from the smartphone Bluetooth menu.
Fitting:
- To optimize the best fit and audio experience, it is recommended to try different earbud sizes.
- Insert the Motobuds into your ear and rotate to fit comfortably.
Basic Operation:
Additional Operation
Factory reset|
- Ensure earbuds are not connected to phone
- Double press MFB and then hold MFB for 5 second until LED shows blue and red
- Put both buds into the charging case
Reject a call| MFB 2sec
Receive incoming and on hold ongoing call| Single Press MFB
LED Indicator
Pairing| Red-blue flash
Standby| Blue flash
Charging| Red steady
Fully charged| O
Battery low| Red flash
References
Read User Manual Online (PDF format)
Loading......