KCT GWB202 65-80L Wheelbarrow Installation Guide
- June 16, 2024
- KCT
Table of Contents
KCT GWB202 65-80L Wheelbarrow Installation Guide
PRODUCT PART
- A 1X-Steel Base
- B 2X-Arms
- C 2X-Legs
- D 1X-Wheel
- E 8X-8x40mm Bolts
- F 1X-12x118mm Wheel Bolt
- G1X-12mm Washer & Nut
- H 8X-8mm Flat Washers, Spring Washers & Nuts
- I 1X-16x9mm Wheel Spacer
PRODUCT DISCRUPTION
-
Using Parts (E) + (H), join Frame Sections (B)+(C) together. Bolt > Washer > Frame > Spring Washer > Nut.
-
Attach one complete Frame Section to the Steel Base (A) with 3x (E) + (H) The front end of the frame should have the thinner edge on the inside. Do not fully tighten at this point.
-
Fit the wheel to first frame part using (F) + (1)
-
Secure the Wheel by attaching the second complete Frame Section,
-
Attach the rest of the second frame to the Steel Base (A).
-
Fully tighten all fixings before use.
Contact us: help@kctdirect.co.uk Web: www.kctdirect.co.uk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>