TABYIK DH-QN04 Electric Heater Instruction Manual
- June 16, 2024
- TABYIK
Table of Contents
DH-QN04 Electric Heater
Instruction Manual
DH-QN04 Electric Heater
Please read the
manual carefully before use and keep it properly for future reference.
THANK YOU FOR ORDERING
Thank you for choosing DH-QNO4 electric heater, which is portable and
convenient for use. For the safe usage of the heater, please read the
following instruction carefully.
PRODUCT DESCRIPTION
This portable heater with combination design of circle and runway for overall
appearance, is extremely simple and fashion. Built-in handle on back, easy to
move wherever you want.
The core heating element of this heater we use PTC,which has high
conversion,can be fast heat-up within seconds. The Tip-over protection design
is for safer use. No naked fire and free oxygen consumption, suitable for home
office use.
INSTRUCTION
Before use, please check all the parts are completed and undamaged. Also, check the applied voltage matches with the label.
- Press on the top, the heater turns on (default at HEAT moode), red indicator light on.
- Press again to switch to FAN mode, stop delivering heat, blow natural wind only, blue indicator light on.
- Press 3rd time to stop.
- Press for auto-oscillation (45° to the max), press again to stop.
PRODUCT SPECIFICATION
Name: Electric heater | Rated Power: 600W |
---|---|
Rated Voltage: 120V~ | Electric Shock Class: Il |
Model: DH-QN04 | Rated Frequency: 60Hz |
NOTE
Before using this heater, please ensure all parts are completed.
- Please note that the heater fan will still working 20 seconds until it completely shut off as to protect heating system and better for long-term use.
- Please wait about 10s for the device resetting, when tip- over or sudden power outage.
- Please turn off the heater before you plug out.
- Please pull the plug out if you don’t use the heater for a long time.
- Please ensure the power is off and the plug has been pulled out when moving the heater.
- Please stop using it and contact the customer service team, if the wires are found damaged.
- Please switch off the heater, clean it with the soft cloth and soap, when there is dirt found on the surface of the heater.
- Please keep the heater away from people which is of disability, sensory handicaps, intellectual deficiency or lack of experience and general knowledge (including children),except the usage is fully under the watch and guard by their guardians.
- DO NOT cover the heater or touch the protection net when it is working.
- DO NOT touch the protection net when it is working, and keep away from walls/block at least 10 centimeter.
- DO NOT place the heater nearby curtain or something that is easy to be sucked in.
- DO NOT use the heater in the environment of inflammable and explosive. The environment temperature should not over 30″ C. Keep the heater away from the inflammable object at least 1 meter to avoid fire hazard.
- DO NOT twist or pull the wire, which might cause damage.
- DO NOT touch the plug with a wet hand to avold electric shock.
- DO NOT use the heater in or around these places: bathtub, sprayer or swimming pool etc.
- DO NOT place and use the heater below the electric socket.
- DO NOT inject your finger or any object into the heater while it is working.
- DO NOT use the heater in condition of high temperature, humid, dusty or volatile place of acid, alkali and oil.
- DO NOT clean it with the gasoline, alcohol and the organic detergent.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference
that may cause undesired operation.
WARNING: Any changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CLEANING AND MAINTENANCE
- Before cleaning, ensure the heater is turned off by removing the power plug from the power outlet.
- Allow the heater and all accessories to cool completely before disassembling and cleaning.
- Please clean it with soft cloth and neutral detergent when you found dirt on its surface to avoid discoloration or breakage.
- DO NOT rinse directly with water.
- Any other cleaning and maintenance service should be performed by an authorized service representative.
- Please store the heater in original package and keep it in cool and dry place when not in use.
WARRANTY
We appreciate your feedback and will do our best guarantee your satisfaction.
Within 1 year after your purchase,shall the product has defects, we will
provide a refund or resend you a new one. Please email us with your concern
and order number. Your inquiries will be taken care of as soon as possible.
This warranty only cover orders from authorized brand online stores and our
official website. We are not responsible for any purchases from other
distribution channels.
Email us : us@uspport.com
Guangdong Shunde DOUHE Electronics Technology Co.,Ltd
203 Room,Second Phase West Block,Guangdong Industrial Design City,
Beijiao,Shunde district,Foshan City, Guangdong Province,China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>