ZEEGMA Pizza Chef User Manual
- June 16, 2024
- ZEEGMA
Table of Contents
ZEEGMA Pizza Chef User Manual
Introduction
Dear customer!
Thank you for placing trust in us and choosing Zeegma. We provide you with a
product perfect for everyday use thanks to the use of high-quality materials
and modern solutions. We are convinced that the product will satisfy your
requirements as it has been designed with utmost care. Before you use the
product, please read this manual carefully.
Should you have any remarks or questions concerning the product, please do not hesitate to contact us: support@zeegma.com
WARNINGS
Please read this instruction manual before operating the device, in order to
familiarize yourself with its functions and use it as intended.
- This device can be used by children years of age and older, and people with limited physical, sensory or mental abilities or without experience and knowledge, if they are supervised or instructed in the safe use of the device and understand the risks involved.
- Be especially careful when using the device when children or pets are around.
- Children must not play with the device. Children without supervision are not allowed to perform cleaning and maintenance of the device.
- Keep the device and its cord out of the reach of children under the age of 8.
- Note! This device cannot be powered by external devices, such as a timer or remote control system. This risks damaging the device.
- The device is for domestic use only. Do not use it for other purposes incompatible with its intended use.
- Connect the device only to a grounded outlet with characteristics consistent with the values indicated on the device label.
- The device has a grounded plug. Do not use the device if the plug is not fully matched to the electrical outlet. Do not modify the plug and do not use adapters.
- Risk of burns: the unit generates high temperatures. Do not touch hot parts of the device.
- Do not immerse the device and its cables in water or any other liquid.
- Always unplug the device from the power source and let it cool down before cleaning and after using it.
- Do not use a damaged or malfunctioning device or a device with a damaged power cord or plug.
- Do not repair or modify the device or the cord. These activities may only be performed by an authorized service center.
- Use only original or manufacturer-recommended replacement parts.
- Do not pull or carry the device by holding the cord. Do not put any objects on it. Do not pull the cord over sharp edges of walls and furniture, and do not allow it to come into contact with hot surfaces.
- Keep the device away from heat sources, high temperatures, hot surfaces, direct sunlight, sources of sparking, open flame.
- Use the product set horizontally on a flat and stable surface.
- Never place oil or water directly on the pizza stone during use.
- Never use a knife or pizza cutter on the stone, as this may damage the surface of the plate.
NOTE! Hot surface – surfaces may become hot during use.
PART DESCRIPTION
- Opening handle
- Window
- Temperature controller
- Thermostat indicator light
- Timer
- Ceramic stone handle
- Plate
- Heating element
USE
Note! Before using for the first time, follow steps 1-3 without food.
- Connect the device to the power source and close the lid.
- Set the temperature controller (3, fig. A) to the maximum value (400°C). The thermostat indicator light (4, fig. A) will light up.
- Set the timer (5, fig. A) for 10 minutes to preheat the device.
- After 10 minutes, make sure the device is preheated, then place the frozen pizza or raw dough on the ceramic stone plate (7, fig. A) with care.
- Close the lid of the device. Set the temperature controller to the desired value and the timer to the desired time (about 4-5 minutes, or until the desired result is achieved). It is recommended to regularly check the level of baked pizzas.
- To decrease or increase the baking temperature, use the temperature controller (3, Figure A).
Note! Do not place too many pizza toppings in the device to avoid burning
the dish.
When preparing frozen pizzas, wait a few minutes after taking them out of the
freezer before placing them in the device.
It is not recommended to prepare pizzas from pourable dough.
TROUBLESHOOTING
CLEANING AND MAINTENANCE
Before cleaning, the device should be turned off, unplugged from the power source and allowed to cool down.
Cleaning the housing
The exterior of the device can be cleaned with a soft, damp cloth. Never
immerse the entire device in water or wash it in the dishwasher.
Cleaning the ceramic stone
The ceramic stone can be cleaned with a soft brush, dry sponge or paper towel.
Note! The ceramic stone should never be cleaned under running water. The stone
can only be cleaned dry.
Do not use abrasives or metal utensils for cleaning, which can damage the
stone’s coating.
Cleaning the pizza cutter
Clean the pizza knife with warm water and a mild detergent.
The photos are for reference only, the actual look of the products may differ from the ones shown in the pictures.
The product complies with requirements of EU directives.
Pursuant to the Directive 2012/19/EU, this product is subject to selective
collection. The product must not be disposed of along with domestic waste as
it may pose a threat to the environment and human health. The worn-out product
must be handed over to the electrics and electronics recycling center.
Thank you for purchasing our product!
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>