ZEEGMA DRADEN Steam Vacuum Cleaner User Manual
- June 9, 2024
- ZEEGMA
Table of Contents
ZEEGMA DRADEN Steam Vacuum Cleaner
Introduction
Dear customer!
Thank you for placing trust in us and choosing Zeegma.
We provide you with a product perfect for everyday use thanks to the use of
high-quality materials and modern solutions.
We are convinced that the product will satisfy your requirements as it has
been designed with utmost care.
Before you use the product, please read this manual carefully.
Should you have any remarks or questions concerning the product, please do not
hesitate to contact us:
[email protected]
Warnings
Please read this manual before you start using the device to see its functions
and use them in accordance with intended use. A failure to follow the safety
guidelines and use at variance with the manual may lead to electric shock,
fire and serious injuries.
Keep this manual for future reference.
STEAM, LOW JET. BURNING RISK.
- Children must not use this device and should not play with it.
- Children must not be near this product if unattended.
- Do not immerse the wire or plug in water or other liquid as it may result in electric shock.
- The feeder cable and plug must always be in good condition and must not be damaged. If these items are defective – it is forbidden to use the device and they must be handed to the service center for repairs.
- This product is intended for household use only and must not be used in the industry.
- Do not switch the power on if the water tank is not properly filled.
- When using, the sprayer must be properly attached to the device and a protective nut must be tightened properly.
- The device must be connected to earthed power socket.
- During operation, the body of the machine must not be inclined at the angle exceeding 45 degrees. Otherwise boiling water will be sprayed along with steam.
- Do not point the steam at people, animals or electric components.
- Before you refill water in the device, before you clean the equipment and before you try to repair it, unplug the power cable.
- If you wish to finish working with the device, unplug the power cable.
- Do not add anti-rust agents, anti-odor agents, alcohol or chemical detergents to the tank. These products may damage the device.
- It is forbidden to open the tank and refill water when the device is operating.
- The equipment must not be used by children or physically/sensory/mentally disabled persons.
- For hard running water, demineralised or filtered water should be used in the device.
Note! Never pour more water than permitted into the device. It may affect the steam generation and lead to excessive steam pressure.
Description
- Universal connector
- Locking ring
- Safety valve
- Button
- Handle
- Body casing
- Light indicator
- Funnel
- Measure
- Long spray nozzle
- Sprayer with curved spray
- Sprayer with round brush
- Extension cord with spray
- Two cotton pads
- Window washing pad
- General spray nozzle
How to install
The steam cleaner is intended to clean bathrooms, toilets, kitchens,
glassware, mirrors and other smooth surfaces. Hot steam cleans dirt by
dissolving greasy and oily substances.
Before you use the product for the first time, please clean it in accordance
with the manual.
Accessories
- Take a long spray nozzle, general spray nozzle and extension cord with spray. Fix one of these elements; to do so, put it on the connector (1) and tighten as showed by the arrow on the nozzle.
- Install the sprayer with round brush and sprayer with curved spray on the long spray nozzle or extension cord with spray. To do so, slip them in.
- Install the window washing pad on the general spray nozzle. To do so, insert its fastenings in nozzle valves.
How to use the product
- Unscrew the valve (3) and pour clean water into the tank through the funnel. The suggested amount of water is 250 ml, a larger amount of water may cause the release of hot water instead of steam. Close the safety valve. When using the product, it is forbidden to open the safety valve. It is permissible only when the device is not supplied with power and is not hot.
- Switch the device on, the indicator (7) will go on and the machine will start heating up. After about three minutes, the device will be hot enough. When it happens, the indicator (7) will go off. Press the button on the body to release steam.
You can easily assemble and disassemble the product accessories. The equipment may by used to clean doors, windows, floors and clothes.
After use
After you have used the product, unplug it and pour water remains out.
How to clean and maintain
To prolong the life of the device, please follow the cleaning and maintenance guidelines.
- Use this device in accordance with intended use and guidelines in the manual. Roll up the feeder cable after every use.
- When the device cools down completely, unscrew the safety valve and pour water remains out. Clean the tank and let it dry off.
- Insert all set components back into the packaging. Store them in a dry and well-ventilated area.
To fill the tank in, use a regular tap water. If the water in the place of
your residence is hard, using tap water may lead to early scaling of the steam
cleaner and in effect shorten its life. This being the case, fill the product
with distilled water.
After every use, empty the water tank not to let scale accumulate.
Do not add any liquids to the tank and do not use clothes drier water,
aromatic water or softened water, fridge water, AC water and rainwater. They
contain organic waste and mineral elements which, when heated, may react
chemically and damage the spray, cause brown dirt and lead to early wear of
the equipment. The use of prohibited types of water will invalidate the
manufacturer’s guarantee.
Do not use an abrasive sponge to clean the device. The device must be cleaned
properly after every tenth use.
Troubleshooting
| Problem | Possible cause | Solution |
|---|---|---|
| No steam | No power supply | Check if the socket works and if equipment has been |
connected properly
No water in the tank| Refill water in accordance with the guidelines in the
manual (see chapter: how to use the product)
To little steam| Too low voltage or unstable voltage| Check if the socket
works and if equipment has been connected properly
Too little water in the tank| Refill water in accordance with the guidelines
in the manual (see chapter: How to use the product)
Water comes out of nozzle instead of steam| Too much water in the tank| Pour
out some water from the tank. The suggested amount is 250 ml
Exceeded inclination of the product when using| When the device operates, the
body of the machine must not be inclined at the angle exceeding 45 degrees. Do
not incline the equipment too much during its operation
Too long heating up| Voltage is too low or unstable| Check if the socket works and if equipment has been connected properly
The product complies with requirements of EU directives.
Pursuant to the Directive 2012/19/EU, this product is subject to selective
collection. The product must not be disposed of along with domestic waste as
it may pose a threat to the environment and human health. The worn-out product
must be handed over to the electrics and electronics recycling center.
The pictures are for reference only. The real design of the products may
differ from the pictures presented.