ZEEGMA Handy Steamer User Manual

: June 9, 2024
: ZEEGMA

Table of Contents

INTRODUCTION
Description
How to install:
Troubleshooting:
EU Declaration of conformity
Documents / Resources

ZEEGMA Handy Steamer

INTRODUCTION

Dear customer!
Thank you for placing trust in us and choosing Zeegma.
We provide you with a product perfect for everyday use thanks to the use of high-quality materials and modern solutions.
We are sure that the product will satisfy your requirements as it has been designed with utmost care. Before you use the product, please read this manual carefully.

Should you have any remarks or questions concerning the product, please contact us:
support@zeegma.com

WARNINGS

Please read this manual before you start using the device to get familiar with its functions and use them in accordance with intended use. A failure to follow the safety guidelines and use at variance with the manual may lead to electric shock, fi re and serious injuries.

Keep this manual for future reference.

WATER STEAM
BURNING RISK

Before you provide power to the product, make sure the voltage specifi ed on the product corresponds to the local voltage.
If the plug, cable or product itself are damaged – do not use this equipment. It is forbidden to use it if it has been dropped or it leaks.
Inspect the product in an authorized service center only. Do not repair the product on your own as it renders the manufacturer’s guarantee invalid.
If the feeder cable is damaged, replace it in the manufacturer’s authorized service center.
Do not leave the room if the product is plugged in (supplied with power)
The device is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they EN are supervised or instructed on safe use of the device.
Do not let children play with the product.
If the product is plugged in or has just been disconnected and still needs to cool down – keep the equipment and its feeder cable out of reach of children below the age of 8.
Do not touch the head of the steamer or its hot surfaces when using. The product generates hot steam – do not point the steamer at people or animals, and do not iron clothes if they are on the body to avoid burns.
Do not supply power when you clean the product /, when you disassemble the accessories, / when you refill water in the device.
This product may be used with the grounded electric socket only.
If the product is hot / i/or plugged in electric socket, do not place the product on any surface – a steam nozzle cannot have a direct contact e.g. with a top.
Check the feeder cable for potential damage on a regular basis.
When using, always make sure the feeder cable does not contact hot steam.
Do not use the product if there is no water left.
If you leave the product (even for a while) – switch it off (with ON/OFF switch) and unplug. Do not leave the hot device unattended and keep it out of reach of children and pets.
After ironing, switch the product off and unplug. The equipment needs 60 minutes to cool down. After cooling, you can start cleaning it, / installing or disassembling accessories, / filling the tank with water or putting into the box.
The product is intended for home use. Do not use it outdoors or in the bathroom.
Do not drag the product through the floor .
The steam may damage walls of the flat or doors or make colors fade.
The product must be filled with running water or distilled water. If water in the place of your residence is hard, using tap water may lead to early scaling of the steamer and in effect shorten its life. This being the case, the product must be filled with distilled water.
Do not add any perfumes, vinegar, descale, ironing agents or other chemicals to the water tank. They are not intended for this equipment.
For hard running water, demineralized or filtered water should be used in the device.

Note!
Do not immerse the product in water or other liquids and do not rinse it with tap water.
Note!
Beware of steam generated by the product. The steam may cause burning.

Description

Stainless steel panel
Machine base
Steam ON/OF
Steam ON/OFF lock slide
Water tank
Water tank lock
Fabric brush
Power key/steam regulation
Water tank stopper
Inlet pipe
Water inlet

How to install:

Before first use:

Remove any labels or protective covers from the steamer head. Straighten cables.
When used for the first time, the steamer may generate a little steam for a few minutes. Thanks to this, it can remove all pollution and bad smell arising from production process.
To avoid mains overloading, we suggest that you do not use the same output circuit with other devices.
Check if the packaging contains all set components.

How to install:

Set the water tank lock button (6) in the position allowing unlocking the tank.
Remove the tank, pull downwards. Pour a suitable amount of water in, and then put the tank back on. Switch the lock key to lock the water tank again .
Supply power to the device and press ON/OFF key (8), the light should go on.
The steamer will start heating up. After forty seconds, the device will be ready for operation.
Pressing the power button again will control the steam released.
Three levels of adjustment are possible:
MAX (red) approx. 30 g
MEDIUM (blue) approx. 25 g
MIN (green), approx. 20 g
When the steamer heats up, do not press the steam activator (3). You can do so after the heating up has finished. If the process has been finished, press this button – the steam will be released. If you take your finger away, steam will not be released. You can cause the steam to be generated continuously – to do so, press the key and slide it downwards (4).
You can connect the product to the water bottle instead of water tank.

How to iron:

The steamer is designed to iron and freshen up creased clothes, drapes, as well as decorative items. It is safe for most fabrics.

Note!
Before you start ironing, check labels and suggestions on cleaning and maintenance. Make sure the manufacturer of the fabric you wish to iron does not prohibit steam ironing.

Note!
The dish is suitable for use with clothes hung vertically or arranged horizontally. When ironing horizontally, make sure that the end of the hose in the tank is immersed in water

Check if the fabric used to manufacture the clothing is permeable so that steam does not accumulate on it and does not dampen it.
Check pockets in the clothes you wish to iron and make sure there are no items left.
Check the back of clothing for any items which may be damaged by steam.
Do not use the steamer on metal clothing components as it may cause them to fade.
After you have pressed the steam activator, you will feel vibration and silent buzzing. This signals regular operation of the device.
When ironing, move the steam-generating surface upwards and downwards through clothing depressions.
If the device gets noisier and noisier, and steam does not come out, this means there is no water in the tank. Check its level and add water (if necessary).
If you release the steam switch, it will stop coming out. If the button has already been locked before, unlock it in the first place to deactivate steam. To do so, press the key and slide it upwards.

After every use:

If you wish to stop using the steamer, release the steam switch. If you have already locked the key before, unlock it in the first place to deactivate steam. To do so, press the key and slide it upwards.
Press the power key or disconnect the plug from the socket.
Slide the water tank out and pour all remains out.
Leave the device vertically on a flat surface to make it cool down.

How to clean and maintain:

Remove the fabric brush from the steamer head and then rinse this surface with wet cloth.
Do not use solvents, anti-corrosion agents and rough cleaning agents.
Do not immerse the steamer in water or other liquid.
Protect the equipment against fall. Do not throw it or try to bend. Do not disassemble the electronics.
Empty the tank water after every use.
Do not store the steamer in a humid place.
Do not expose the product to sunlight.
Make sure the steam outlet is clean, not clogged and devoid of scale.
When storing, the steamer must be positioned vertically.
The equipment must be disposed of by a suitable recycling center.

Troubleshooting:

PROBLEM	SOLUTION
The steamer fails to heat up

Make sure the plug has been inserted properly.
Make sure it is supplied with power.
Check power key on the product.

The steamer fails to generate steam|

Check water level in the water tank.
Make sure the water tank has been fixed properly.
Press the steam switch firmly.
Keep the dish vertically or horizontally (if you hold the dish horizontally: make sure that the end of the hose in the tank is submerged in water.

Leaking water tank|

Make sure the permissible water level in the tank has not been exceeded.
Make sure the water inflow in the tank has been fixed properly.
Keep the dish vertically or horizontally (if you hold the dish horizontally: make sure that the end of the hose in the tank is submerged in water.

During operation, loud buzzing or pumping sounds are emitted|

Check water level in the tank. If water is insufficient or missing, pour water into the tank.

Water gushes from the steam outlet| When steamer is not hot yet, press power key and then let the machine heat up for 40 seconds – then press the steam switch.

Note!
Do not use the steamer directly on metal clothing items as it may cause them to fade. If there are any metal accessories on the clothes, be careful when using the steamer.

The pictures are for reference only. The real design of products may differ from pictures presented.

EU Declaration of conformity

BLACK – 5902581657329
Name and address of the manufacturer or his authorized representative:
Brand Line Group Sp. z o. o. ul. A. Kręglewskiego 1, 61-248 Poznan, POLAND
This declaration of conformity is issued under the sole responsibility of the manufacturer: Brand Line Group Sp. z o. o.
Subject of declaration: HANDIG
The subject of this declaration mentioned above is in conformity with the relevant requirements of the EU harmonization legislation:
014/35/EU – LVD Directive
2014/30/EU – EMC Directive
2011/65/EU – RoHS Directive
References to the relevant harmonized standards used, or references to other technical specifications, for which compliance is declared:
EN 60335-2-85:2003+A1:2008 +A11:2018+A2:2020
EN 60335-1:2012+A11:2014 +A13:2017+A1:2019+A14:2019 +A2:2019+A15:2021
EN 62233:2008
EN 55014-1:2017+A11:2020
EN 55014-2:2015
EN IEC 61000-3-2:2019
EN 61000-3-3:2013+A1:2019
IEC 62321-2:2013
IEC 62321-3-1:2013
IEC 62321-5:2013
IEC 62321-6:2015
Additional information:
Signed on behalf of: Brand Line Group Sp. z o. o.

Poznan, 11.04.2022 (place and date of issue)

The product complies with requirements of EU directives.
Pursuant to the Directive 2012/19/EU, this product is subject to selective collection. The product must not be disposed of along with domestic waste as it may pose a threat to the environment and human health. The worn-out product must be handed over to the electrics and electronics recycling center

Brand Line Group Service – Support
List of Authorized Service Centers:
www.zeegma.com/en/service
Thank you for purchasing our product!