ZAZU Kiki Star Projector Instructions
- June 16, 2024
- ZAZU
Table of Contents
Kiki, Ruby, Harry, Leo and Polly
STAR PROJECTOR
WITH SOOTHING MELODIES
Kiki Star Projector
MANUAL STAR PROJECTOR
Take the module out of the plush and place 3x AA batteries (not included).
Only use alkaline batteries, no zinc carbon.
A Set the ON/OFF SWITCH A into the ON position. Put the projection module
back.
B Star Projection: Press BUTTON B to start the projection. Press more times to
switch between colours. The projector will switch off automatically after 30
min.
C Melodies: Press BUTTON C to start playing the music. Press several times to
switch between melodies. The sound will switch off after 15 min.
D Volume: Press BUTTON D 1 or 2 times (loud-soft).
E Cry sensor ON/OFF
– To switch ON/OFF press BUTTON E for 3 sec.
– ON A green light will flicker for a few sec. If your baby starts crying, the
last played song will automatically switch back on. Cry sensor will stay
active for 12 hours.
– OFF An orange light will flicker for a few sec.
Note The sensitivity of the sensor will be influenced by distance and by
objects in between sensor and baby.
**** WARNING! SAFETY GUIDELINES
– IMPORTANT! keep for future reference.
– This ZAZU product is fully compliant with the EU, CA, AU, NZ, USA and CN
legislation.
– Please keep the packaging away from small children.
– Never allow your child to play with the batteries.
– This product works with 3x AA 1.5 V batteries (not included).
– Only use the specified batteries.
– Remove empty batteries from the product.
– Batteries should only be placed by adults.
– Do not mix old and new batteries.
– Do not mix alkaline, standard (carbon-Zn), or rechargeable Ni MH) batteries.
– Only use alkaline batteries, no zinc carbon.
– Non-rechargeable batteries cannot be charged.
– Batteries should be placed in the correct polarity.
– Do not short-circuit the power terminal.
– When not in use please switch the product OFF completely.
– Do not place inside the cot or too close to the baby.
– The plush can be washed by hand and air dried, but remove the module
beforehand.
– This light does not get warm.
– This product is intended for indoor use and is not water resistant.
Please keep dry. For cleaning do not immerse in water, but wipe with a damp
cloth.
– Do not try to disassemble the product if it stops working.
Please contact customer service.
ZAZU Limited | Unit 10, English business P English Close, Hove, East Sussex
BN3 7ET, Great Britain Manufactured and distributed by ZAZU
PO Box 299 | 3740 AG Baarn The Netherlands | info@zazu-kids.nl
V6-MANUAL-KIKI-RUBY-HARRY-LEO-POLLY_2023-12
Documents / Resources
| ZAZU
Kiki Star
Projector
[pdf] Instructions
Kiki, Ruby, Harry, Leo, Polly, Kiki Star Projector, Star Projector, Projector
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>