AC INFINITY AC-NEG16 IONBEAM GREEN User Manual
- June 15, 2024
- AC Infinity
Table of Contents
IONBEAM GREEN
PLANT NIGHT CYCLE WORK LIGHT
USER MANUAL
AC-NEG16 IONBEAM GREEN
WELCOME
Thank you for choosing AC Infinity. We are committed to product quality and
friendly customer service.
If you have any questions or suggestions, please don’t hesitate to contact us.
Visit www.acinfinity.com and click contact for
our contact information.
| WEB | LOCATION | |
|---|---|---|
| [email protected] | ||
| www.acinfinity.com | Los Angeles, CA |
MANUAL CODE NEG2308X1
| PRODUCT | MODEL | UPC-A |
|---|---|---|
| IONBEAM GREEN | AC-NEG16 | 8.19137E+11 |
PRODUCT WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:
- Ensure your power source conforms to the electrical requirements of this product.
- Read all instructions before installing and using this product.
- Be careful not to damage or cut the wire insulation (covering) during the installation. Do not permit wires to come in contact with any sharp edges.
- If you are unfamiliar or have doubts about performing this product’s installation, seek the services of a qualified, trained, and licensed professional. Inappropriate installation will void this product’s warranty.
- This product must not be used in potentially hazardous locations such as flammable, explosive, chemical-laden or wet atmospheres.
- Do not cover power cords with rugs or other fabric materials.
- Safety precautions should be exercised during the installation, operation, and maintenance of this product.
- Do not block or tamper with this product in any manner while it is in operation as it may cause electric shock, fire, or damage to this product.
- Do not depend on the on/off programming as the sole means of shutting power from this product. Unplug the power cord before installing, servicing, or moving this product.
- Do not operate this product while its cord is damaged, or if it malfunctions, has been dropped, or is damaged in any manner.
- Avoid staring directly at any lighting fixture for extended periods of time.
KEY FEATURES
PRODUCT CONTENTS
INSTALLATION
LIGHT BAR CHAIN ASSEMBLY
STEP 1
Connect the light bar’s female port to the light controller’s male connector.
STEP 2
Connect the light controller to the power adapter.
EXTENDING THE CHAIN
You may connect the included bar extension cords in between any link in this
light bar chain to lengthen it. Secure all connections using the twist-on
pieces.
DIFFUSER
You may snap on the diffuser for a softer and more even light distribution.
LIGHT BAR MOUNTING
POLE MOUNTING
Magnetically mount your light bar directly on your grow tent steel pole.
You may also use the included hook and loop cable ties around your light bar
and mounting bar to adjust the lighting angle and for extra security.
CANVAS MOUNTING
Magnetically mount your light bar to the wall or ceiling of your grow tent.
Set the included mounting bar on the outer side of your tent. Set your light
bar at the exact spots on the inner side.
Once mounted, you can move the light bar and mounting bar connection along
your grow tent surface as needed.
Test that the magnetic connection through the canvas is secure before use.
STEP 1 — WALL MOUNTING
Make sure that your mounting area is free from obstruction. Use a mounting bar
to mark your drilling holes with the logo facing the wall.
STEP 2 — WALL MOUNTING
Drill holes into the marked locations.
STEP 3 — WALL MOUNTING
If you are mounting onto anything other than a wood support or stud, insert
the included four wall anchors into the drilled mounting holes.
You may need to use a hammer to secure them through the holes.
STEP 4 — WALL MOUNTING
Align the mounting bar holes with the wall anchors, making sure the logo faces
the wall.
Screw or drill in the wood screws to secure the mounting bar.
STEP 5 — WALL MOUNTING
Set the light bar magnet ends onto the mounting bar.
POWERING THE LIGHT
Plug the power adapter into a wall outlet.
CONTROLLER MOUNTING
MAGNET MOUNTING
Magnetically mount the light controller onto any steel surface.
STEP 1 — WALL MOUNTING
Locate a spot free of obstruction and secure the anchor into your wall. Twist
the wood screw into the anchors.
STEP 2 — WALL MOUNTING
Use the mounting hole located on the back of the controller for wall mount.
STARTER GUIDE
GROW LIGHT PLACEMENT
Place your light bar at the top of your grow space, shining down to provide
even coverage over the entire area.
Grow devices like inline fans and grow lights can be placed below the light
and will not obstruct the light’s reach.
LIGHT INTENSITY
Start your grow light at 25% light intensity. Increase it as needed to provide
a visible workspace or to complement your main grow light.
UIS™ PLATFORM
The UIS™ platform enables you to connect a single central controller with
several grow devices simultaneously. By creating this fully integrated system,
you can power and program all your devices together or separately for
optimized grow tent management.
Your grow system can be regulated using your controller hub or remotely on the
AC Infinity app (paired with compatible controllers), where you will have
access to automation programming and climate data.
You can also connect your favorite grow light and outlet device to integrate
them into the UIS platform using our RJ11/12 adapter and control plug module.
Central controller and grow devices will be sold separately and may still be in development at the time of your purchase of this product.
CONNECTING TO UIS™
IONBEAM LED grow lights can connect with select smart controllers as part of an integrated system using the included UIS extension cord.
CONNECTING TO UIS CONTROLLERS
Use the included UIS M-M extension cord to connect your light bar(s) to your
selected UIS controller via the light controller’s side port.
Your selected UIS controller will override all of the light controller’s onboard settings when connected in this manner.
PROGRAMMING
-
LIGHTING
Pressing the light button will increase the light intensity level in 25% increments (25% – 100%), displayed with white LED indicators. Pressing this button at 100% intensity will cycle to 0%.
Holding any button will shut off your light bar and the timer. Pressing any button when your light bar is off will turn the light and the timer back on at their previous settings.
Setting the light intensity without setting a timer will keep the light on indefinitely. -
TIMER
Pressing the clock button will set the timer in 5-minute increments (5MIN. – 20MIN.), displayed with orange LED indicators.
Lighting will be active for the amount of time set here (ex. 15MIN. for a 15 minute timer). It will deactivate after the indicated time has passed.
Pressing any button when your light bar is off will turn the light and timer back on at their previous settings.
Pressing the clock button at the 20MIN. setting will deactivate the timer. -
UIS CONNECTION
Refer to the programming section of your selected UIS controller for programming instructions.
AC INFINITY PRODUCTS
Pruning Shears
Stainless-steel gardening shears designed to effectively trim and fine-tune
small plants to support healthy growth. The razor sharp blades are coated in
non-stick Titanium to prevent resin-buildup through heavy use, and are
controlled via spring-loaded handles specially constructed for maximum
comfort.
Drying Racks
A polyester mesh netting rack designed to dry and cure plant materials within
a multi-tiered hanger system. The steel wireframe build can support heavier
capacities within its zippered chambers while remaining collapsible for easy
storage when not in use.
Bowl Trimmers
A manually operated trimming machine designed to quickly and efficiently
process high volumes of finely groomed herbs, buds and flowers. Features
straight blades for wet trimming and serrated blades for dry trimming,
controlled by an easy-to-use removable hand crank and collected in a non-stick
bowl.
Discover the latest innovations in environmental controls at acinfinity.com
WARRANTY
This warranty program is our commitment to you, the product sold by AC
Infinity will be free from defects in manufacturing for a period of two years
from the date of purchase. If a product is found to have a defect in material
or workmanship, we will take the appropriate actions defined in this warranty
to resolve any issues.
The warranty program applies to any order, purchase, receipt, or use of any
products sold by AC Infinity or our authorized dealerships. The program covers
products that have become defective, malfunctioned, or expressively if the
product becomes unusable. The warranty program goes into effect on the date of
purchase. The program will expire two years from the date of purchase. If your
product becomes defective during that period, AC Infinity will replace your
product with a new one or issue you a full refund.
The warranty program does not cover abuse or misuse. This includes physical
damage, submersion of the product in water, incorrect Installation such as
wrong voltage input, and misuse for any reason other than intended purposes.
AC Infinity is not responsible for consequential loss or incidental damages of
any nature caused by the product. We will not warrant damage from normal wear
such as scratches and dings.
Contact our dealers department at
[email protected] or ( 626) 838-4656
for more information about our dealers and distributors program. Contact our
customer service department at
[email protected] or
626-923-6399 for product and
warranty assistance. Our business hours are Monday through Friday, 9:00 am to
5:00 pm PST.
If you have any issues with this product, contact us and we’ll happily resolve your problem or issue a full refund!
COPYRIGHT © 2023 AC INFINITY INC. ALL RIGHTS RESERVED
No part of the materials including graphics or logos available in this booklet
may be copied, photocopied, reproduced, translated or reduced to any
electronic medium or machine readable form, in whole or in part, without
specific permission from AC Infinity Inc.