polk RESERVE R Series Speakers and Loudspeakers Owner’s Manual

: October 27, 2023
: polk

polk RESERVE R Series Speakers and Loudspeakers

Expect Great Sound—The Polk Reserve Story

Thank you for purchasing the Polk Reserve Series loudspeakers! Modern styling combined with Polk’s premium Pinnacle tweeter and Turbine mid-range driver deliver high-reseolution detail and imaging. With our detailed, deep effortless bass, you will enjoy a whole new listening experience. Pure and minimalist, the Polk Reserve Series is engineered and designed with your entertainment in mind. Having built a reputation as the makers of great sound for more than 45 years, Polk Audio takes pride in superior sound and build quality, which feature many patented and award-winning audio innovations. For Polk, building audio products isn’t just a job – it’s a passion – to deliver great sound that is accessible for everyone.

Technical Assistance or Service

If your product was damaged during shipping, please contact the authorized Polk Audio retailer where you purchased your product. For technical support, FAQs, and repair information, visit http://polk.custhelp.com. For a complete list of contact information, visit https://www.polkaudio.com/contact-us. Support email addresses and phone numbers vary based on the region where your purchased your product.

WARNING: Listen Carefully
Polk Audio loudspeakers are capable of playing at extremely high volume levels, which could cause serious or permanent hearing damage. Polk Audio, Inc. accepts no liability for hearing loss, bodily injury, or property damage resulting from the misuse of its products. Keep these guidelines in mind and always use good judgment when controlling volume:

Limit prolonged exposure to volume levels that exceed 85 decibels (dB). For more information about safe volume levels, take a look at the Occupational Health
and Safety Administration (OSHA) guidelines at http://www.osha.gov/.

Product Disposal

Certain international, national and/or local laws and/or regulations may apply regarding the disposal of this product. For more information, please contact the
retailer where you purchased this product or the Polk importer/distributor in your country. More information is also available at www.polkaudio.com or by contacting Polk Audio at 5541 Fermi Court, Carlsbad, California, 92008, USA. Phone: 1-800-377-7655.
This symbol on our electrical products or their packaging indicates that it is prohibited in Europe to discard this product(s) as domestic waste. In order to ensure that you dispose of the product(s) correctly, please dispose of the product(s) according to local laws and regulations on the disposal of electrical and electronic equipment. In doing so, you are contributing to the retention of natural resources and to the promotion of environmental protection by the treatment and disposal of electronic waste.

CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning ﬂash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.
Only use attachments/accessories speciﬁed by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table speciﬁed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled, or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Notes On Use

WARNINGS

Avoid high temperatures. Allow for sufficient heat dispersion when installed in a rack.
Keep the unit free from moisture, water, and dust.
Do not obstruct the ventilation holes.
Do not let foreign objects into the unit.
Do not let insecticides, benzene, and thinner come in contact with the unit.
Never disassemble or modify the unit in any way.
Ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths or curtains.
Naked ﬂame sources such as lighted candles should not be placed on the unit.
Do not expose the unit to dripping or splashing ﬂuids.
Do not place objects ﬁlled with liquids, such as vases, on the unit.

CAUTION:
Use caution when unpacking speaker. Tweeter has a pointed tip and may cause injury. Replace speaker grille when not in use.

A Note About Recycling:
This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with the local recycling regulations. When discarding the unit, comply with local rules or regulations.

EU Declaration of Conformity
Hereby, [Sound United, LLC] declares that our product is in compliance with following EU/EC Directives. The full text of the EU declaration of conformity is available at the following internet address:

< EU/EC Directives>
RoHS: 2011/65/EU, and amendment directive (EU) 2015/863 EU declaration of conformity URL: https://www.polkaudio.com/declarations-of-conformity”

Sound United, LLC
5541 Fermi Court
Carlsbad, CA 92008
EU contact: Sound United Europe, A division of D&M Europe B.V. Beemdstraat 11, 5653 MA Eindhoven, The Netherlands

What’s in the Box

Each box contains:

Loudspeaker(s)
Owner’s Manual
Registration Card
Magnetic grilles (Speaker cable not included)

How to Connect Your System
To get the best sound quality, it’s important to wire your speakers correctly.

Wire Preparation
Follow the hookup directions included with your receiver/ampliﬁer. Strip 0.5” (12.7mm) of insulation from each of the two conductors of the wire to expose the bare metal and twist each of the individual conductors into single un- frayed strands. Note that one of the terminals on the rear of each speaker is marked red (+) and the other is black (–). Make sure that you connect the wire from the positive (+) terminal of your ampliﬁer or receiver to the red (+) terminal on your speaker and the wire from the negative (–) terminal of your ampliﬁer or receiver to the black (–) terminal on your speaker. Most wire has some indicator (such as color-coding, ribbing or writing) on one of the two conductors to help you maintain consistency.

These recommendations are for all connections from the ampliﬁer/receiver to each speaker:

Runs		Minimum	Wire	Gauge
Lengths	up to 25′ (5 m)	16
Lengths but less	greater than 25′ (5 m)

than 50′ (15 m)

| 14
Lengths but less| greater than 50′ (15 m)

than 75′ (25 m)

| 12
Lengths| greater than 75′ (25 m)| 10

Binding Posts
To connect wire to the binding post, unscrew the binding post cap and insert the bare wire into the hole near the base of the binding post. Do not insert the insulated part of the wire into the hole as this will not give you a good connection. Tighten the binding post cap until it seats ﬁrmly with the wire, but do not over tighten.

Connectors
You have several options when choosing connectors for your speaker wires, and it’s really a matter of personal preference. Three of the more commonly used are banana plugs, spade lugs and bare wire. If you know where you want to locate your speakers and plan to set up your system and leave them there, then bare wire will work ﬁne. Just make sure there are not stray strands of wire that could come into contact. If you like to experiment with different speaker locations, spade lugs or banana plugs offer more convenient options when it comes to disconnecting and reconnecting wires.

Basic Floor-Standing, Center, Bookshelf, and Height Module Speaker Hookup
Make sure that the red (+) and black (-) connectors on your ampliﬁer or receiver connect to the red (+) and black (-) connectors on your speakers. If your speakers sound “thin,” with little bass and little or no center image, odds are that one of the speaker wires is connected backwards. Double check all connections.

Bi-Wiring (R700 only)
Bi-wiring can provide noticeable improvements in the overall transparency of your loudspeakers. After removing the jumpers, run separate speaker wires to the low and high frequency drivers from a single ampliﬁer (the upper set of binding posts are for the high frequency drivers, the lower set of binding posts are for the low frequency drivers). Connect one set of speaker wires to the upper terminals on each speaker and one set of wires to the lower terminals. Connect the other ends of both wire sets to the same ampliﬁer outputs. See ampliﬁer/AV receiver user manual for conﬁguration instructions (Figure 1).

Bi-Amping (R700 only)
Bi-amping allows you to use separate ampliﬁers for the high and low frequency sections of your loudspeaker for greater dynamic range and lower distortion. We recommend that your separate ampliﬁers have identical gain to preserve the speaker’s voicing balance. After removing the jumpers, connect the speaker wires from the high frequency ampliﬁer outputs to the upper set of terminal posts on each speaker. Follow the same procedure for connecting the low frequency ampliﬁer outputs to the lower set of terminals (Figure 2). Remember to maintain correct wiring polarity (+ to +, – to –) in all connections. See ampliﬁer/AV receiver user manual for conﬁguration instructions.

Bass Management
When using your Reserve Series loudspeakers with a receiver or processor employing bass management in a home theater, we recommend the following settings:

R500, R600 and R700: set to “small” when using a subwoofer and set the crossover frequency between 40-80Hz. If no subwoofer is present in the system, set these to “large”.
R100 and R200: set to “small” when using a subwoofer and set the crossover frequency between 50-80Hz.
R300, R350, R400: set to “small” when using a subwoofer and set the crossover frequency between 60-80Hz.

Rubber Feet and Adjustable Floor Spikes
Rubber feet and ﬂoor spikes are included with your Reserve ﬂoor-standing loudspeakers to anchor and stabilize the speaker on any type of ﬂoor. In order to expose the spike, simply pull the rubber feet off. The ﬂoor spikes can be adjusted from below and require two hands.
Note: If the speaker is stable on the ﬂoor, no adjustment is necessary. If the speaker is unstable, follow these steps:

The speaker will be inclined to settle on three of the four spikes leaving one spike slightly off the ﬂoor.
Determine which spike needs to be adjusted.
Use the included Allen wrench to turn the spike clockwise to lower it and counterclockwise to raise it.
As the spike contacts the ﬂoor, it will become more difficult to turn. At that point the speaker should be stabilized.
Tighten the lock ring to prevent the spike from loosening over time.

**Caring for Your Reserve Loudspeakers

**

Enclosure Finish
Your Reserve loudspeakers are ﬁnished with a premium vinyl. To clean the panels, use a soft dry cloth. You may use furniture polish if needed. Never use harsh detergents or cleaning ﬂuids. Note: Do not use any petroleum-based cleaners or solvents on the loudspeaker cabinets.

Do not use furniture polish on black gloss lacquer.
Clean black lacquer veneer with a damp cloth.

Dusting the Baffle
Use a can of compressed air for the grille and/or baffle to dust. Use a “computer keyboard” vacuum (only on the grille, not the baffle).

Reserve Series Speaker Positioning
Placement Recommendations for the R300, R350, and R400 Center Channel Speakers
The most popular placement for your center channel speaker is below your TV. You may also place your center channel above your TV should you choose. The R400 center channel is very heavy, and we do not recommend wall mounting it. The R350 supports wall-mount via built-in keyhole slots, or it can be placed on a table or center channel stand. The R350 can also be utilized as the front left and right stage. If you would like to use these as lefts and rights, you will need to mount each R350 speaker vertically and put them on either side of your TV. Use the included wall mount template (R350 only) for assistance mounting the speakers. To maximize the sound quality of your speaker system, correct placement is important.

Warning: The logo for the R350 speaker is magnetically attached and can be moved from the center channel position to the left or right end of the grille when used as a left or right front speaker. Use caution when removing the logo, as it can be a choking hazard.
Note: Your Reserve Series speakers are compatible with basic/advanced 2.0, 2.1, 3.1, 5.1, 7.1 and 9.1 surround setups (optional subwoofer shown in graphic) and all Atmos setups (ex. 5.1.2, 5.1.4, 7.1.4, 7.1.6).

Listening in 5.2 Surround
You can use the Reserve Series speakers as rear surround speakers in a Polk Audio home theater surround system. Ideal rear channel surround speaker placement is along a side wall, slightly behind and above the listening position. Note: If you cannot place rear surrounds along the side walls, position them along the rear wall above the listening position.

Listening in 7.1 Surround
Enjoy added depth to your surround sound experience with four rear surround speakers instead of two.

*DOLBY ATMOS 5.2 Configuration
SPEAKER PLACEMENT IN LISTENING AREA
DOLBY ATMOS” 5.2.4 Configuration
SPEAKER PLACEMENT IN LISTENING AREA**

polk-RESERVE-R-Series-Speakers-and-Loudspeakers-fig-4

DOLBY ATMOS 7.2 Configuration
SPEAKER PLACEMENT IN LISTENING AREA

polk-RESERVE-R-Series-Speakers-and-Loudspeakers-fig-16

DOLBY ATMOS” 7.2.4 Configuration
SPEAKER PLACEMENT IN LISTENING AREA

Floor-Standing Loudspeakers

Reserve Series Specifications	R500	R600	R700
Tweeter	1 in (25 mm) Pinnacle ring radiator	1 in (25 mm) Pinnacle ring
radiator	1 in (25 mm) Pinnacle ring radiator
Mid-range/mid-bass	Two 5-1/4 in (133 mm) Turbine cones	Two 6.5 in (165 mm)
Turbine cones	6.5 in (165 mm) Turbine cone
Woofers/subwoofers	—	—	Two 8 in (203 mm) woofers
Overall frequency response	32 Hz–50 kHz	30 Hz–50 kHz	30 Hz–50 kHz

Frequency response (-3 dB limits)

|

49 Hz–38 kHz

|

38 Hz–38 kHz

|

38 Hz–38 kHz

Recommended amplifier power| 25–200W| 25–200W| 20–300W
Amplifier output compatibility Minimum impedance| 8W / 6W / 4W

3.9W

| 8W / 6W / 4W

4.0W

| 8W / 6W / 4W

3.6W

Sensitivity (2.83V/1m)| 87 dB| 87.5 dB SPL| 88 dB SPL
Crossover Frequency
Tweeter/mid-range| 2500 Hz| 2700 Hz| 2700 Hz
Mid-range/mid-bass| —| —| 350
Dimensions and Weight Attributes
Product dimensions (W x H x D) (greatest overall depth, grille)| 10.1 x 41.1 x 13.7 in

255.4 x 1044.5 x 348.8 mm

| 11.0 x 41.9 x 15.0 in

280.7 x 1063.8 x 381.6 mm

| 12.6 x 45.0 x 16.9 in

320.7 x 1143.8 x 428.3 mm

**Center Channel Speakers***

Reserve Series Specifications	R300	R350	R400
Tweeter	1 in (25 mm) Pinnacle ring radiator	1 in (25 mm) Pinnacle ring
radiator	1 in (25 mm) Pinnacle ring radiator
Mid-range/mid-bass	Two 5.25 in (133 mm) Turbine cones	Four 4 in (102 mm)
Turbine cones	Two 6.5 in (165 mm) Turbine cones
Woofers/subwoofers	—	—	—
Overall frequency response	45 Hz–50 kHz	50 Hz–50 kHz	36 Hz–50 kHz
Frequency response (-3 dB limits)	65 Hz–38 kHz	75 Hz–38 kHz	48 Hz–38 kHz
Recommended amplifier power	30–200 W	25–200 W	20–200 W
Amplifier output compatibility Minimum impedance	8W / 6W / 4W

3.8W

| 8W / 6W / 4W

3.9W

| 8W / 6W / 4W

4.1W

Sensitivity (2.83V/1m)| 86.5dB| 87 dB SPL| 89 dB SPL
Crossover Frequency
Tweeter/mid-range| 2200 Hz| 2700 Hz| 2500 Hz
Mid-range/mid-bass| —| 1400| —
Dimensions and Weight Attributes
Product dimensions (W x H x D) (greatest overall depth, grille)| 19.0 x 6.8 x 8.9 in

482.6 x 172 x 226.5 mm

| 30.0 x 5.5 x 7.4 in 762 x 141 x 187.5 mm| 24.2 x 7.8 x 13.8 in

615 x 196.6 x 350 mm

**Bookshelf Speakers***

Reserve Series Specifications	R100	R200
Tweeter	1 in (25 mm) Pinnacle ring radiator	1 in (25 mm) Pinnacle ring

3.6W

| 8W / 6W / 4W

3.8W

166 x 324 x 259.5 mm

| 7.5 x 14.1 x 13.9 in

190 x 359 x 353.8 mm

Caring for Your Reserve Loudspeakers
Enclosure Finish
Your Reserve loudspeakers are ﬁnished with a premium vinyl. To clean the panels, use a soft dry cloth. You may use furniture polish if needed. Never use harsh detergents or cleaning ﬂuids. Note: Do not use any petroleum-based cleaners or solvents on the loudspeaker cabinets.

Do not use furniture polish on black gloss lacquer.
Clean black lacquer veneer with a damp cloth.

Dusting the Baffle
Use a can of compressed air for the grille and/or baffle to dust. Use a “computer keyboard” vacuum (only on the grille, not the baffle).

Limited 5-Year Warranty

Polk Audio, Inc. warrants to the original purchaser only that this Polk Audio Loudspeaker Product (the “Product”) will be free from defects in materials and workmanship for a period of ﬁve (5) years from the date of original retail purchase from a Polk Audio Authorized Dealer. However, this Warranty will automatically terminate prior to the expiration of the ﬁve (5) years if the original retail purchaser sells or otherwise transfers the Product to any other party. The original retail purchaser shall hereinafter be referred to as “you.” To allow Polk Audio to offer the best possible warranty service, please ﬁll out the Product Registration Card(s) and send it to the Factory, at the address provided on the Product Cards(s) within ten (10) days of the date of purchase. Defective Products must be shipped, together with proof of purchase, prepaid insured to the Polk Audio Authorized Dealer from whom you purchased the Product, or an authorized service center. Products must be shipped in the original shipping container or its equivalent; in any case the risk of loss or damage in transit is to be borne by you. If upon examination at the Factory or Polk Audio Authorized Dealer it is determined that the unit was defective in materials or workmanship at any time during this Warranty period, Polk Audio or the Polk Audio Authorized Dealer will, at its option, repair or replace this Product at no additional charge, except as set forth below. All replaced parts and Products become the property of Polk Audio. Products replaced or repaired under this warranty will be returned to you, within a reasonable time, freight prepaid.
This warranty does not include service or parts to repair damage caused by accident, disaster, misuse, abuse, negligence, inadequate packing or shipping procedures, commercial use, voltage inputs in excess of the rated maximum of the unit, cosmetic appearance of cabinetry not directly attributable to defect in materials or workmanship, or service, repair, or modiﬁcation of the Product which has not been authorized or approved by Polk Audio. This warranty shall terminate if the Serial number on the Product has been removed, tampered with or defaced. This warranty is in lieu of all other expressed Warranties. If this Product is defective in materials or workmanship as warranted above, your sole remedy shall be repair or replacement as provided above. In no event will Polk Audio, Inc. be liable to you for any incidental or consequential damages arising out of the use or inability to use the Product, even if Polk Audio, Inc. or a Polk Audio Authorized Dealer has been advised of the possibility of such damages, or for any claim by any other party. Some states do not allow the exclusion or limitation of consequential damages, so the above limitation and exclusion may not apply to you. All implied warranties on this Product are limited to the duration of this expressed Warranty. Some states do not allow limitation on how long an implied Warranty lasts, so the above limitations may not apply to you. This Warranty gives you speciﬁc legal rights, and you also may have other rights which vary from state to state. This Warranty applies only to Products purchased in the United States of America, its possessions, and U.S. and NATO armed forces exchanges and audio clubs. The Warranty terms and conditions applicable to Products purchased in other countries are available from the Polk Audio Authorized Distributors in such countries.

Sound United, LLC
5541 Fermi Court
Carlsbad, CA 92008 USA
EU Importer: D&M Europe B.V. Beemdstraat 11, 5653 MA Eindhoven, The Netherlands
+1 800-377-7655
www.polkaudio.com
email: polkcs@polkaudio.com twitter: @polkaudio

RESERVE™ TOWER SPEAKERS

Flagship-quality sound, elegant and reﬁned looks, true value

R500 Compact Floorstanding Speaker

Slim and powerful, ﬁts into any décor
The R500 slim and elegant floorstanding tower delivers impactful sound in a compact design that fits beautifully into any décor.

SPECIFICATIONS

Transducer| 1″ Ring Radiator

Two 5 ¼” Turbine Cone

Consumer Benefits

Amazing Sound and Elegance
With a slim and elegant design, the Reserve line has a minimal elegance that will fit into any décor. Inheriting Polk’s flagship transducer array, the R500 produces exceptional sound that rivals competitor speakers that sell for twice the price. Hi-Res certified, the Reserve R500, is designed for today’s two- channel music listening as well as multi-channel 3D audio found in movies, sports, and video game soundtracks.

Polk Newly Patented X-Port
Polk’s newly patented X-Port incorporates an Eigentone Filter (ETF) offering distortion-free, effortless bass. Consisting of a set of closed-pipe absorbers that are specifically tuned to catch and eliminate traditional speaker distortions. X-Port ensures that the upper bass and mid-range are free of port and cabinet resonances for smooth, detailed audio.

High Definition Pinnacle Ring Radiator Tweeter
Over 40 years of tweeter innovation, design and prototyping has led to the development of the new 1” high definition Pinnacle ring radiator tweeter. Developed by Polk Audio, it delivers ultra-clear, crisp highs without unwanted coloration or distortions. The Pinnacle tweeter features a finely tuned waveguide that dramatically improves the dispersion of high frequency energy ensuring a broad “sweet spot” while the critically damped rear-chamber helps defeat any unwanted resonances.

Dual 5.25” Turbine Cones
Polk developed the Turbine cone specifically for our flagship products to ensure the natural reproduction of the mid-range, to which human ears are particularly sensitive. These Turbine cones combine Polk’s proprietary foam core and molded Turbine geometry which dramatically increases stiffness and damping, without adding mass. You will hear every detail and experience a smooth, detailed mid-range and effortless bass.

Features

Pinnacle Tweeter: The new ring radiator tweeter design dramatically improves dispersion while delivering clear, crisp and natural highs
Dual Turbine Cones: Deliver smooth and incredibly detailed mid-range imaging
Polk Patented X-Port: closed-pipe absorbers that are specifically tuned to catch and eliminate traditional speaker distortions
Anti-diffraction Magnetic Grilles: Acoustically inert grilles offer a clean aesthetic without sacrificing sound
Versatile Feet: Depending on your room, use carpet-friendly feet with built-in spikes or rubber boots to maximize stability on hard floor surfaces; each foot can be individually leveled and adjusted
Power Recommendation: 100W or more per channel power amplification is recommended to experience the best quality and performance
Built to Last: Industry-leading, premium 5-year warranty

Polk Audio is a DEI Holdings, Inc. Company. Polk Audio, Polk, are registered trademarks of Polk Audio, LLC. / The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. / Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
/ For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, Digital Surround, and the DTS logo are registered trademarks or trademarks of DTS, Inc. in the United States and other countries. / © 2020 DTS, Inc. ALL RIGHTS RESERVED. / Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates. / The Bluetooth® word mark and logos are registered trademarks owned
by Bluetooth SIG, Inc. and any use of such marks by Polk Audio is under license. / Other trademarks and trade names are those of their respective owners

R600 Floorstanding Loudspeaker

Beauty, value, and exceptional bass
The elegant R600 floorstanding loudspeaker delivers powerful bass performance and sounds better than speakers offered at twice the price.

SPECIFICATIONS

Transducer| 1″ Ring Radiator

Two 6 ½” Turbine Cone

Consumer Benefits
Amazing Sound and Elegance
With a slim and elegant design, the Reserve line has a minimal elegance that will fit into any décor. Inheriting Polk’s flagship transducer array, the R600 produces exceptional sound that rivals competitor speakers that sell for twice the price. Hi-Res Audio certified, the Reserve R600 is designed for today’s two-channel music listening as well as multi-channel 3D audio found in movies, sports, and video game soundtracks.

Dual 6.5” Turbine Cones
Polk developed the Turbine cone specifically for our flagship products to ensure the natural reproduction of the mid-range, to which human ears are particularly sensitive. These Turbine cones combine Polk’s proprietary foam core and molded Turbine geometry which dramatically increases stiffness and damping, without adding mass. You will hear every detail and experience a smooth, detailed mid-range and effortless bass.

High Definition Pinnacle Ring Radiator Tweeter
Over 40 years of tweeter innovation, design and prototyping has led to the development of the new 1” high definition Pinnacle ring radiator tweeter. Developed by Polk Audio, it delivers ultra-clear, crisp highs without unwanted coloration or distortions. The Pinnacle tweeter features a finely tuned waveguide that dramatically improves the dispersion of high frequency energy ensuring a broad “sweet spot” while the critically damped rear-chamber helps defeat any unwanted resonances.

Dual 6.5” Turbine Cones
Polk developed the Turbine cone specifically for our flagship products to ensure the natural reproduction of the mid-range, to which human ears are particularly sensitive. These Turbine cones combine Polk’s proprietary foam core and molded Turbine geometry which dramatically increases stiffness and damping, without adding mass. You will hear every detail and experience a smooth, detailed mid-range and effortless bass.

Power Port 2.0
Polk’s new Power Port 2.0 is the latest version of our successful Power Port technology. In addition to Power Port’s carefully engineered port design that smooths the flow of air as it exits the cabinet through the port, X-Port adds a set of closed-pipe absorbers that are specifically tuned to unwanted cabinet and port resonances. Together, these two technologies combine to function as Power Port 2.0 to deliver smooth, detailed audio.

Features

Pinnacle Tweeter: The new ring radiator tweeter design dramatically improves dispersion while delivering clear, crisp and natural highs
Dual Turbine Cones: 6.5” Turbine cones deliver smooth and incredibly detailed mid-range imaging
Power Port 2.0 (patent pending): Innovative new port design enables effortless bass to play lower and louder than traditionally ported speakers
Anti-diffraction Magnetic Grilles: Acoustically inert grilles offer a clean aesthetic without sacrificing sound

R700 Premium Stereo Floorstanding Loudspeaker

Flagship-quality sound, elegant and reﬁned looks, true value
The R700 flagship floorstanding loudspeaker showcases unbelievably refined elegance and sound. Features Polk’s flagship drivers and delivers deep, effortless bass by combining Power Port and brand new, patent-pending X-Port technology to create Power Port 2.0..

SPECIFICATIONS

Transducer| 1″ Ring Radiator

6 ½” Turbine Cone Dual 8″ Woofers

Consumer Benefits
Refined Elegance and Amazing Sound
The new R700 flagship floorstanding loudspeaker is ideal for design-forward consumers who want their speakers to blend in with their surroundings. With a bold, rich sound, the flagship 1” Pinnacle tweeter and 6.5” Turbine cone combine with Power Port 2.0 to bring life to any room. Immerse yourself in your favorite musical recordings or your weekly movie night with the new Polk Reserve R700 flagship tower.

High Resolution Pinnacle Ring Radiator Tweeter
Over 40 years of tweeter innovation, design and prototyping has led to the development of the new 1” high definition Pinnacle ring radiator tweeter featured on Polk’s flagship Legend series. Developed by Polk Audio, it delivers ultra-clear, crisp highs without unwanted coloration or distortions. The Pinnacle tweeter features a finely tuned waveguide that dramatically improves the dispersion of high frequency energy ensuring a broad “sweet spot” while the critically damped rear-chamber helps defeat any unwanted resonances.

Power Port 2.0
Polk’s new Power Port 2.0 is the latest version of our successful Power Port technology. In addition to Power Port’s carefully engineered port design that smooths the flow of air as it exits the cabinet through the port, X-Port adds a set of closed-pipe absorbers that are specifically tuned to unwanted cabinet and port resonances. Together, these two technologies combine to function as Power Port 2.0 to deliver smooth, detailed audio. Combined with dual 8” woofers you’ll get louder, cleaner bass while minimizing turbulence and port noise.

Premium Cabinets Built for Better Performance
Polk believes cabinets should be beautiful and add nothing to the playback. Polk Reserve cabinets, braces, and internal enclosures are precisely engineered to minimize unwanted internal standing waves and eliminate unwanted resonances. Laser Doppler Vibrometer (LDV) designed, the advanced precision point to point braced cabinets with individual enclosures mid and low- frequency transducers combined with new Cabinet Resonance Control (CRC) eliminate unwanted panel resonances.

Features

Pinnacle Tweeter: The new ring radiator tweeter design dramatically improves dispersion while delivering clear, crisp, and natural highs

R900 Height Module

Easily add next generation, 3D sound to your home theater

Designed to perfectly complement the Reserve series, this optional height module adds exceptionally realistic sound without the hassle of installing speakers in the ceiling. The R900 is fully compatible with all the latest next gen home theater codecs: Dolby Atmos, DTS, DTS:X, DTS:X Virtual, Dolby Atmos Height Virtualization Technology, IMAX Enhanced, and Auro-3D.

SPECIFICATIONS

Transducer| 0.75″ Ring Radiator

4” Turbine Cone Midrange

Minimum Impedance| 4.2W
Sensitivity| 85.5dB SPL

(When wall mounted)

Frequency Response| 70Hz – 32kHz

(When wall mounted)

Dimensions and| (W)166mm x (H)158.3mm x (D)320mm
Weight|
| (W)6.5” x (H)6.2” x (D)12.6”
| 6.6Ibs/3kg

Consumer Benefits
Versatile Placement
The Polk Reserve R900 height module is Dolby Atmos and DTS:X . compatible. With the ability to wall mount or place on top of
a compatible Reserve speaker, this height module allows convenient flexibility. Flip the switch on the back of the speaker to select the desired position and the speaker will automatically adapt to the optimal performance.

New 4” Turbine Cone Midrange Driver
Using the same patented Turbine Cone as the Reserve line, this height module is timbre matched and positioned in the array to deliver an incredibly immersive Dolby Atmos and DTS:X experience.

High Resolution Pinnacle Ring Radiator Tweeter
Over 40 years of tweeter innovation, design and prototyping has led to the development of the new 1” high definition Pinnacle
ring radiator tweeter. Developed by Polk Audio, it delivers ultra-clear, crisp highs without unwanted coloration or distortions.
The Pinnacle tweeter features a finely tuned waveguide that dramatically improves the dispersion of high frequency energy ensuring a broad “sweet spot” while the critically damped rear-chamber helps defeat any unwanted resonances.

Vertical Transducer Array
A vertical transducer array allows flexible placement either on a wall or placed directly on top of a compatible Reserve speaker. A vertical dispersion pattern directs sound perfectly to the correct area of the ceiling into the optimal listening area. You will enjoy exceptionally realistic overhead sound in a comfortable and convenient listening area without the hassle of installing speakers in your ceiling.

Completely Sealed Enclosure
The R900 features a fully sealed enclosure to prevent resonances and distortions.

Timbre Matched for Unmatched- Performance
Designed with the same driver components of the Reserve series speakers, you can mix and match to create the ultimate home theater set up.

Features

Pinnacle Tweeter: The new ring radiator tweeter design dramatically improves dispersion while delivering clear, crisp and natural highs
Turbine Cone: Delivers smooth and incredibly detailed mid-range imaging
Anti-diffraction Magnetic Grilles: Acoustically inert grilles offer a clean aesthetic without sacrificing sound
Supports the Latest Immersive Codecs: Delivers 3D audio found in Dolby Atmos, Dolby Atmos height virtualization, DTS, DTS:X, DTS Virtual:X and IMAX Enhanced soundtracks
Flexible Placement: The R900 can be wall mounted or placed on top of any compatible Reserve speaker
Perfect Match: Designed and perfectly timber-matched
to beautifully complement the Polk Reserve line; add to compatible bookshelf or tower speaker for a perfectly immersive home theater experience.

Register your new Polk product online: www.polkaudio.com/registration/
Register your product to add an additional five years of warranty coverage, and create a permanent record of your purchase. By registering, it ensures we can contact you should the need arise. We take privacy seriously and do not share or sell registration information (see privacy policy for more details): www.polkaudio.com/privacy-policy

No Internet? Need help registering your product or just have questions? Contact Polk Customer Service.
For US and Canada call: +1 800-377-POLK (7655) or +1410-358-3600 Email: polkcs@polkaudio.com

Outside of the US: UK +44 2890279830
NL +31 402507800 DE +49 215712080 Email: polk-eu@mailmw.custhelp.com