VICOUSTIC Penray 02 Tiles Instruction Manual
- June 12, 2024
- VICOUSTIC
Table of Contents
VICOUSTIC Penray 02 Tiles Instruction Manual
Included
PENRAY 02_tiles
tiles 02.1 | 3 uni.
tiles 02.2 | 3 uni.
tiles 02.3 | 3 uni.
Not included
Level
Measuring Tape
Box Cutter
Flexi Glue Ultra
Apply Flexi Glue Ultra on the back of the acoustic panel, near the edges and
in the center. Do not wait longer than 5 minutes after applying the glue to
attach the panel to the wall.
Place the panel on the suitably chosen position on the wall. Once in the
desired place, press frmly against the wall for 15 seconds.
For the installation of Gen Tiles on the ceiling, we recommend using Flexi
Glue Ultra.
To ensure that you maximize the strength of the glue, don’t make any
adjustments to the panel after bonding.
Do not apply Gen Tiles behind radiators or too close to a heat source.
Possible setup examples
One box (12 tiles)
One box (12 tiles)
One box (12 tiles)
One box of each color (36 tiles)
Main Ofce, R&D & Logistics
Avenida do Pólo 3, Nº 159, Carvalhosa
Cell: 4590-137 Paços de Ferreira, Portugal
Office
Rua Quinta do Bom Retiro Nº 16, Armazém 9
2820-690 Charneca da Caparica, Portugal
Tel: (+351) 212 964 100
Info and Sales
Email: [email protected]
www.vicoustic.com
© Vicoustic, 2021 | V7
No parts of this document might be copied and/or published without written
consent of Vicoustic.