AFIKIM ELECTRIC VEHICLES Afiscooter C Electric Mobility Scooter User Manual
- June 12, 2024
- AFIKIM ELECTRIC VEHICLES
Table of Contents
AFIKIM ELECTRIC VEHICLES Afiscooter C Electric Mobility Scooter
Product Information
The Afiscooter C is an electric vehicle manufactured by Afikim Electric Vehicles. It is designed for personal mobility and is equipped with maintenance-free sealed batteries. The scooter is CE certified and meets the standards set by the Competent Authority in the UK. The warranty for the Afiscooter C is subject to the local distributor’s warranty.
Product Usage Instructions
Before operating the Afiscooter C, it is important to read the user manual
carefully. If there are any parts of the manual that you do not understand,
please contact your dealer or any of our Service Centres for assistance.
Ensure that you read the manual step by step to avoid any potential injury or
damage from misuse.
It is imperative to read Chapter 10 (EMI WARNING) in the manual before operating the Afiscooter C. Electromagnetic Interference (EMI) can cause erratic behavior in powered vehicles and may be dangerous to the user.
The serial number and manufacturer’s data can be found on the plastic mud guard cover on the metal label of the Afiscooter C. Refer to figure 1 on page 21 of the manual for more information.
For visually impaired individuals, a digital format of the user manual can be downloaded from the Afikim Electric Vehicles website at www.afiscooters.com.
The manual also provides information on authorized distributors who are
qualified to distribute technical information regarding the Afiscooter C. For
any faulty information identified, please contact your local distributor.
It is important to note that only an authorized supplier or qualified
technician should perform the initial setup of the scooter and follow all
procedures outlined in the manual.
The user’s manual and the scooter itself use specific symbols to identify warnings and important information:
- WARNING! – Indicates a potentially hazardous condition/situation. Failure to follow designated procedures can cause personal injury, component damage, or malfunction. On the scooter, this is represented by a triangular black symbol.
- MANDATORY! – These actions must be performed as specified. Failure to do so can cause personal injury and/or equipment damage. On the scooter, this is represented by a white square on a dark background.
- PROHIBITED! – These actions are prohibited and must not be performed at any time or under any circumstances. Performing a prohibited action can cause personal injury and/or equipment damage. On the scooter, this is represented by a black symbol with a circle and slash.
— Edition 2 Revision 1, 02/07/19
I:RDc+User manualAFISCOOTER C+ User-Manual (Ed02-Rev1)-English.docx
Afiscooter C
USER Manual
“
MANUFACTURED BY AFIKIM ELECTRIC VEHICLES Kibbutz Afikim, 15148, Israel
Tel:972-4-6756451; Fax: 972-4-6751456
WARNING Read the User Manual carefully before operating AFISCOOTER C. If you
do not fully understand any part of this manual, please contact your dealer or
any of our Service Centres. Read this manual step by step, as injury or damage
may occur from misuse!
WARNING Electromagnetic Interference (“EMI”) can cause powered vehicles to
behave erratically, which could be dangerous to the user. For your safety and
protection, it is IMPERATIVE that you take time to read Chapter 10 (“EMI
WARNING”) before operating AFISCOOTER C.
Serial Number and Manufacturer’s data are fixed at the front, on the plastic
mud guard cover on the metal label of the AFISCOOTER C. (See figure 1, page
21)
WARRANTY AFIKIM ELECTRIC VEHICLES strives continuously to improve its
products, their quality and reliability, in constant effort to ensure its
customers’ satisfaction as well as its place in the market. Warranty for
AFISCOOTER C is subject to your local distributor’s warranty.
INFORMATION Only licensed distributers of AFIKIM ELECTRIC VEHICLE are
qualified to distribute technical information regarding the AFISCOOTER C
Further information than what is mentioned in this user manual i.e. technical
updates, safety notices and others will be communicated by local distributor’s
that has up-to-date contact information with AFIKIM ELECTRIC VEHICLES In case
you identify faulty information, please contact your Local distributer
2
“
CE CERTIFICATION The Afikim Electric Vehicles Ref. Registration Number with
the Competent Authority (UK) Is: CA000292. Our Authorized Representative with
the Competent Authorities is: The Squaire 12, Am Flughafen, 60549 Frankfurt am
Main, Germany www.arazygroup.com Phone: +49 69 95932-5090 Fax: +49 69
95932-5200 E-mail: germany@arazygroup.com
3
“
CONTENTS
CHAPTER 1 OVERVIEW OF THE AFISCOOTER C (MAIN FEATURES)
5
CHAPTER 2 SAFETY SYMBOLS FOR THE AFISCOOTER C
6
CHAPTER 3 SAFETY INSTRUCTIONS for AFISCOOTER C
11
CHAPTER 4 GENERAL DESCRIPTION OF THE AFISCOOTER C
21
CHAPTER 5 ADJUSTMENT INSTRUCTIONS
23
CHAPTER 6 OPERATING INSTRUCTIONS
24
6.1 GENERAL
24
6.2 LCD DISPLAY USE
26
6.3 DRIVING AND GENERAL USE
27
CHAPTER 7 CHARGING
30
CHAPTER 8 MAINTENANCE
31
CHAPTER 9 STORAGE
35
CHAPTER 10 TROUBLESHOOTING AND REPAIR
36
CHAPTER 11 EMI WARNING
38
Appendix A Specification Sheet
39
4
“
CHAPTER 1 OVERVIEW OF THE AFISCOOTER C (MAIN FEATURES)
Congratulations on choosing the AFISCOOTER C as your electrically powered
scooter. AFISCOOTER C is a scooter for elderly and disabled persons, and for
fun and sport. Scooter classification: Class B in accordance with EN12184.
AFISCOOTER C is designed for a maximum occupant mass of up to 135kg (300 lbs,
3W) / 150kg (330 lbs, 4W). AFISCOOTER C is designed for elderly and disabled
persons. There is a certain level of motoric capability, visual ability and
cognitive ability required in order to operate the scooter. It is recommended
to consult with your physician to evaluate your ability to operate the
scooter. AFISCOOTER C is an indoor & outdoor scooter designed to work in
normal environmental conditions from very cold temperatures (-30ºC/-22ºF) to
very hot temperatures (+45ºC/+113ºF). AFISCOOTER C will operate in light rain
showers, but extended use is not recommended in heavy rain or snow. AFISCOOTER
C is easy to operate. The relatively large wheels allow the user to drive on
unpaved roads, over moderately rough terrain and over obstacles as high as 5″
(12 cm). Refer to Appendix A: Specification Sheet (Page 30) for the required
tyre pressure. AFISCOOTER C maximum safe slope is: 9º (16%). Do not attempt to
climbdescend slopes that steeper than the scooters limitation. The braking
system stops the vehicle smoothly and within a short distance after the
throttle control lever is released. AFISCOOTER C is equipped with both front
and rear shock absorbers to give the user a comfortable and smooth drive, even
when using the vehicle on moderately rough roads. A standard handbrake is also
provided for backup. The seat is spacious and comfortable, and can be rotated
for easy access (standard seats). It can be adjusted forward and backward. The
seat can also be adjusted up and down by a technician. All controls are
conveniently mounted on the tiller and are simple to operate. Under normal
conditions, AFISCOOTER C can travel approximately 40 km (27 miles) before the
batteries require recharging. The distance will be reduced if the scooter is
used frequently on slopes, rough ground or to climb kerbs etc. After reading
through this entire manual and before using AFISCOOTER C, please perform a
brief visual check of the scooter to make sure that there is no visible
damage. If you have any questions or concerns, contact your dealer.
AFISCOOTER C was developed to use maintenance-free sealed batteries only.
A Maintenance Manual is available for trained technicians.
For visually impaired people a digital format of the User manual can be
downloaded from our web site www.afiscooters.com
5
“
CHAPTER 2 SAFETY SYMBOLS FOR THE AFISCOOTER C
WARNING! An authorized supplier or qualified technician must perform the
initial setup of this scooter, and must perform all of the procedures in this
manual.
The symbols below are used throughout this user’s manual and on the scooter to
identify warnings and important information. It is very important for you to
read them and understand them completely.
WARNING! Indicates a potentially hazardous condition/situation. Failure to
follow designated procedures can cause either personal injury, component
damage, or malfunction. On the scooter, this is a triangular black symbol.
MANDATORY! These actions must be performed as specified. Failure to perform
mandatory actions can cause personal injury and/or equipment damage. On the
scooter, this is a white square on a dark background.
PROHIBITED! These actions are prohibited. These actions must not be performed
at any time or under any circumstances. Performing a prohibited action can
cause personal injury and/or equipment damage. On the scooter, this is a black
symbol with a circle and slash.
Please note and strictly adhere to the following Safety Instructions.
Additional Warnings and Notices are printed in this user manual; it is
imperative that you read carefully all chapters of this manual before
operating the AFISCOOTER C. It is also advisable to refresh your memory by re-
reading this manual periodically.
Get acquainted with AFISCOOTER C and its operational features before driving
it. Drive slowly (speed limit dial set to MIN) until you get used to
AFISCOOTER C, its various functions, safety features and its braking
capabilities and limitations.
Watch carefully for pedestrians and drive your AFISCOOTER C accordingly. In
crowded areas, always drive in half speed mode. Drive only where permitted
according to all applicable local laws and ordinances. AFISCOOTER Cis 66 cm
(26″) wide. Take great care not to hit persons or any objects around the
vehicle.
Never remove any of the AFISCOOTER Csafety parts such as fenders, plastic
covers or emergency brake lever. Never remove any of the Warning labels. If
any of the Warning labels is removed, gets worn off or painted over, etc. ask
your dealer to supply you with a new label.
6
“
Never put your hands, fingers, or legs into any moving parts or under any
protective cover, since moving parts and hot surfaces are under those covers.
When making adjustments (folding the seat back, adjusting the armrest, moving
the seat forward or backward, adjusting the tiller distance), as well as when
squeezing the throttle control lever or handbrake, always take care that your
hands and fingers are not trapped between any of the moving parts. When moving
the tiller forward or backward, be careful not to trap your fingers in the
mechanism.
Never load AFISCOOTER C with more than 135 kg (300 lbs, 3WHEELS) or 150 kg
(330 lbs, 4WHEELS), depending on the model) total load (user weight and all
other loads combined, including baskets). The load in the rear basket must not
exceed 8 kg (17.6 lbs). The load in the front basket must not exceed 5 kg (11
lbs). AFISCOOTER C is designed to carry ONE person only on the Single Seat
model. Never operate it with an additional person on board, including a child.
Never inflate AFISCOOTER C tyres more than the manufacturer’s recommended
pressure, shown on the tyres.
Never use AFISCOOTER C on stairs. Never try to go over an obstacle that is
more than the maximum recommended slope angle and obstacle height given in the
specification sheet. When driving over an obstacle, always drive so that the
front of AFISCOOTER C is facing the obstacle.
If for any reason AFISCOOTER C does not stop when you release the throttle
control lever, or takes longer to stop than it should (3 meters on a level
surface), immediately use the handbrake to stop AFISCOOTER C, turn the main
key switch to OFF, and contact your dealer.
Do not use AFISCOOTER C in heavy rain or extreme humidity, or at temperatures
below -30ºC (-22ºF) or above +45ºC (+113ºF).
WARNING, surface temperatures may be high
7
“
The seat weighs 21 kg (46 lbs). Each battery weighs a minimum of 14 kg (31
lbs). The Power Unit weighs a minimum of 25 kg (55 lbs). Be careful when
lifting the seat and the batteries. See instruction for lifting the seat and
the batteries in Chapter 8: Maintenance, and Chapter 9: Troubleshooting and
Repair. Always lift using your knees and legs, not your back. If the
AFISCOOTER C is involved in any kind of an accident in which parts are
damaged, you must get a qualified technician to examine it before continuing
to use it.
Batteries contain lead and acid, which is very corrosive. Batteries must be
handled and disposed of in accordance with proper procedures.
Not intended to be used as a seat in a motor vehicle
When driving, always make sure that the backrest is in its fully upright
position.
Use lead acid maintenance-free sealed batteries only.
WARNING!!! Special care must be taken to prevent children from operating the
AFISCOOTER C. Do not allow unsupervised children to play near the AFISCOOTER C
scooter while the batteries are charging. Always drive carefully. Adjust your
speed according to road conditions. When turning at high speed, the AFISCOOTER
C can become unstable. Before making sharp turns, reduce speed to minimum, to
prevent roll-over. The AFISCOOTER C is able to go up slopes higher than the
recommended safe slope. However, do not drive on slopes whose incline you do
not know. Always drive very slowly and do not drive on the side of such
slopes. Before starting to drive, make sure your emergency brake operates
properly.
8
“
Do not release either the manual or the manual release lever of the
electromagnetic brake (EMB) when the AFISCOOTER C is on a slope. When on any
sort of an incline, never place the AFISCOOTER C in freewheel mode while
seated on it or standing next to it. The lights of AFISCOOTER C should be on
when visibility is reduced, day or night.
Since your seat upholstery is fire resistant, do not cover it or replace with
any upholstery other than upholstery of the same kind. When removing the
battery cover, watch out for hot parts. The motor, axle, EMB, electronic cards
and electronic controller might be hot, Do not touch them until you have
checked their temperature.
Make sure your fingers are not squeezed between the levers and the rubber
grip.
Do not use a cell phone, walkie-talkie, laptop, or other radio transmitter
while operating AFISCOOTER C.
Removal of the grounding prong can create electrical hazard. If it is
necessary to use a 3-pronged electrical outlet, properly install an approved
2-pronged adapter.
Do not connect an extension cord to the AC/DC converter or to the battery
charger.
Keep tools and other metal objects away from the battery terminals. Contact
with tools can cause electrical shock. Do not sit on the AFISCOOTER C when it
is on any type of lift/elevation product.
Explosive conditions exist
9
“
Disposal and recycling: The AFISCOOTER C consists of Recyclable materials
(Plastic parts, batteries, electronics etc.). For information on proper
disposal of your AFISCOOTER C, its parts and packaging, contact your
authorized dealer.
Wear safety glasses. Contains lead.
The battery charger is for indoor use only.
Flammable material. Do not expose to open flame.
At the rear of the AFISCOOTER C is the manual release lever of the EMB. When
using this lever, be careful not to touch the surface of the motor, as it
could be very hot and cause injury. See the warning label at the rear of the
scooter near the lever.
10
“
CHAPTER 3 SAFETY INSTRUCTIONS for AFISCOOTER C
GENERAL MANDATORY! Do not operate your new AFISCOOTER C scooter for the first
time without reading and understanding this user manual completely. Your
AFISCOOTER C is a state-of-the-art life-enhancement device designed to
increase mobility. We provide an extensive range of products to best fit the
individual needs of the user. Please be aware that the final selection and
purchasing decision regarding the type of AFISCOOTER C scooter to be used is
the responsibility of a user who is capable of making such a decision and of
his or her healthcare professional (i.e., medical doctor, physical therapist,
etc.). The contents of this manual are based on the expectation that a
mobility device expert has properly fitted AFISCOOTER C scooter to the user
and has assisted the prescribing healthcare professional and/or the authorized
dealer to give instructions for the use of the product. There are certain
situations, including some medical conditions, where the user will need to
practice operating the AFISCOOTER C in the presence of a trained attendant. A
trained attendant can be defined as a family member or a professional
specially trained in assisting a user in various daily living activities. As
you begin using your AFISCOOTER C during daily activities, you will probably
encounter situations in which you will need some practice. Simply take your
time and you will soon be in full and confident control as you manoeuvre
through doorways, on and off elevators, up and down ramps, and over moderately
rough terrain. Below are some precautions, tips, and other safety
considerations that will help you operate the AFISCOOTER C safely.
MODIFICATIONS We have designed and engineered your AFISCOOTER C to provide
maximum mobility and utility. Under no circumstances should you modify, add,
remove, or disable any feature, part, or function of your AFISCOOTER C.
WARNING! Do not modify your AFISCOOTER C in any way not authorized by the
manufacturer. Do not use accessories if they have not been tested or approved
by the manufacturer.
REMOVABLE PARTS
WARNING! Do not attempt to lift or move your AFISCOOTER C by any of its
removable parts, including the armrests, seat, or shroud.
11
“
PINCHING POINTS In the AFISCOOTER C there are some points that have potential
to be pinching points. These refers mainly to moving parts such parts such as
wheels throttle level etc. Never put your hands, fingers, or legs into any
moving parts.
PRE-RIDE SAFETY CHECK Get to know the feel of your AFISCOOTER C and its
capabilities. We recommend that you perform a safety check before each use to
make sure your AFISCOOTER C operates smoothly and safely. Perform the
following inspections prior to using your scooter:
Check for proper tyre inflation. Maintain but do not exceed the psi/bar/kPa
air pressure rating indicated on each tyre.
Check all electrical connections. Make sure they are secure and not corroded.
Check all harness connections. Make sure they are secured properly. Check the
brakes. Check the battery charge. If you discover a problem, contact your
authorized AFISCOOTER C dealer for assistance.
TYRE INFLATION Your AFISCOOTER C is equipped with pneumatic tyres. Check the
tyre pressure at least once a week. Proper inflation pressures will prolong
the life of your tyres and help ensure the smooth operation of your AFISCOOTER
C. WARNING! It is critically important that the psi/bar/kPa air pressure
indicated
on each tyre is maintained at all times. Do not under-inflate or over-inflate
your tyres. Under-inflation may result in loss of control, and over-inflation
may burst the tyre. Failure to maintain the indicated pressure rating at all
times may result in tyre and/or wheel failure. WARNING! Inflate your scooter
tyres from a regulated air source with an attached pressure gauge
NOTE: If the tyres on your AFISCOOTER C are marked with a psi rating only, use
the following conversion formulas to find the bar or kPa rating:
Bar = psi x 0.06895 kPa = psi x 6.89476.
WEIGHT LIMITATIONS
Your scooter is rated for a maximum weight capacity. Refer to Appendix A
Specification Sheet for details. MANDATORY! Stay within the specified weight
capacity for your AFISCOOTER C. Exceeding the weight capacity voids your
warranty. We will not be held responsible for injuries and/or property damage
resulting from failure to observe weight limitations. WARNING! Do not carry
passengers on your scooter. Carrying passengers on your AFISCOOTER C may
result in instability.
12
“
INCLINE INFORMATION More and more buildings have ramps with specified degrees
of inclination, designed for easy and safe access. Some ramps may have turning
switchbacks (180-degree turns) that require you to have good cornering skills
on your AFISCOOTER C.
Proceed with extreme caution as you approach the downgrade of a ramp or
incline. Take wide turns with your AFISCOOTER C around any tight corners. If
you do that, the scooter’s rear wheels will follow a wide arc. Do not cut the
corner short, and do not bump into or get hung up on any railing corners. When
driving down a ramp, keep the AFISCOOTER C scooter’s speed adjustment set to
the slowest speed setting to ensure a safely controlled descent. Avoid sudden
stops and starts. Refer to Figure A to determine the maximum slope, depending
on scooter speed. AFISCOOTER C speed 12 km/hr: (450W)
AFISCOOTER C speed 10 km/hr: (450W)
AFISCOOTER C speed 15 km/hr: (950W)
AFISCOOTER C speed 12 km/hr: (950W)
AFISCOOTER C speed 10 km/hr: (950W)
13
“
Figure A. Maximum Recommended Incline Angle
When driving up an incline, try to keep your AFISCOOTER C moving. If you must
stop, start up again slowly, and then accelerate cautiously. When driving down
an incline, set the speed switch to MIN and drive forward only. If your
AFISCOOTER C starts to move down the incline faster than you want, allow it to
come to a complete stop by releasing the throttle control lever, then push the
throttle control lever forward slightly to ensure a safely controlled descent.
WARNING! When on any incline, never place the AFISCOOTER C in freewheel mode
while seated on it or standing next to it. WARNING! When climbing an incline,
do not zigzag or drive up at an angle. Always drive your AFISCOOTER C scooter
straight up the incline. This greatly reduces the possibility of tipping over
or a fall. Always exercise extreme caution when climbing an incline. WARNING!
Do not drive your AFISCOOTER C across an incline or diagonally up or down an
incline; if possible, do not stop while driving up or down an incline.
WARNING! Do not drive up or down a potentially hazardous incline (e.g., areas
covered with snow, ice, cut grass, or wet leaves).
WARNING! Even though your AFISCOOTER C is capable of climbing slopes greater
than those illustrated in Figure A, do not, under any circumstances, exceed
the incline guidelines or any other specifications presented in this manual.
Doing so could cause your AFISCOOTER C to become unstable.
Note that public accesses ramps are not subject to government regulation in
all countries, and therefore do not necessarily have the same standard degree
of slope. Other inclines may be natural or not be designed specifically for
scooters. Figure A illustrates your AFISCOOTER C stability and its ability to
climb including under various weight loads and under controlled testing
conditions.
These tests were conducted with the AFISCOOTER C seat in the highest position
and in its farthest rearward position. Use this information as a guideline.
Your AFISCOOTER C ability to travel up inclines is affected by your weight,
scooter speed, your angle of approach to the incline, and your AFISCOOTER C
setup. WARNING! Any attempt to go up or down a slope steeper than shown in
Figure-A may make your AFISCOOTER Cunstable and cause it to tip. WARNING!
Never carry an oxygen tank weighing more than 15 lbs (6.8 kg). Never put more
than 5 Kg (11 lbs) in the front basket or more than 8 Kg (17.6 lbs) in the
rear basket.
14
“
Figure B. Normal Driving Position Figure C. Increased Stability Drive Position
When you approach an incline, it is best to lean forward. See Figures B and C.
This shifts the centre of gravity of you and your AFISCOOTER C towards the
front of the AFISCOOTER C for improved stability. NOTE: If the throttle
control lever is released while you are moving forward up a ramp, the
AFISCOOTER C may roll back approximately 1 foot (30 cm) before the brake
engages. If the throttle control lever is released while you are moving in
reverse, the AFISCOOTER C may roll back approximately 3 feet (one meter)
before the brake engages.
CORNERING INFORMATION Excessively high cornering speeds can result in tipping.
Factors that affect the possibility of tipping include, but are not limited
to, cornering speed, steering angle (how sharply you are turning), uneven road
surfaces, inclined road surfaces, riding from an area of low traction to an
area of high traction (such as passing from a grassy area to a paved area
especially at high speed while turning), and abrupt changes of direction. High
cornering speeds are not recommended. If you feel that you may tip over in a
corner, reduce your speed and steering angle (i.e., lessen the sharpness of
the turn) to prevent your AFISCOOTER C from tipping.
WARNING! When cornering sharply, reduce your speed and maintain a stable
centre of gravity. When using your AFISCOOTER C at higher speeds, do not
corner sharply. This greatly reduces the possibility of a tip or fall. Always
exercise your common sense when cornering.
BRAKING INFORMATION Your AFISCOOTER C is equipped with two powerful braking
systems: Regenerative: Uses electricity to rapidly slow the vehicle when the
throttle control lever returns to the centre/stop position. Park Brake:
Activates automatically after regenerative braking slows the vehicle to a near
stop, or when power is removed from the system for any reason.
OUTDOOR DRIVING SURFACES Your AFISCOOTER C is designed to provide optimum
stability under normal driving conditions, on dry, level surfaces of concrete,
tarmac, or asphalt. However, we recognize that there will be times when you
will encounter other surfaces. For this reason, your AFISCOOTER C is designed
to perform well on packed soil, grass, and gravel. Feel free to use your
AFISCOOTER C safely on lawns and in parks. Reduce your AFISCOOTER C speed when
driving on uneven terrain and/or soft
surfaces. Avoid tall grass that can become tangled in the running gear. Avoid
loosely packed gravel and sand. If you feel unsure about a driving surface,
avoid it.
15
“
PUBLIC STREETS AND ROADWAYS WARNING! Do not operate your AFISCOOTER C on
public streets or roadways. It may be difficult for traffic to see you when
you are seated on your AFISCOOTER C. Obey all local pedestrian traffic rules.
Wait until your path is clear of traffic, and then proceed with extreme
caution.
STATIONARY OBSTACLES (STEPS, CURBS, ETC.) WARNING! Do not drive near raised
surfaces, unprotected ledges, and/or drop-offs (curbs, porches, stairs, etc.).
WARNING! Do not try to go up or down an obstacle that is too high. WARNING! Do
not try to go backward down any step, curb, or other obstacle. This may cause
the AFISCOOTER C to tip.
WARNING! Be sure your AFISCOOTER C is travelling perpendicular to any curb you
may be required to go up or down. WARNING! Do not attempt to climb a curb that
is higher than 5 cm (2″). PRECAUTIONS DURING INCLEMENT WEATHER Avoid exposing
your AFISCOOTER C to inclement weather. If you are suddenly caught up in rain,
snow, severe cold or heat while operating your AFISCOOTER C, proceed to
shelter at the earliest opportunity. Thoroughly dry your AFISCOOTER C before
storing, charging, or operating it. PROHIBITED! Operating in rain, snow, salt,
mist/spray conditions, and on icy slippery surfaces can have an adverse affect
on the electrical system. WARNING! Prolonged exposure to extreme hot or cold
weather may affect the temperature AFISCOOTER C parts, possibly resulting in
skin irritation. Exercise caution when using your AFISCOOTER C in extremely
hot or cold conditions or when exposing your AFISCOOTER C to direct sunlight
for prolonged periods of time.
WARNING Surface temperatures can increase when exposed to external sources of
heat (e.g. sunlight).
16
“
FREEWHEEL MODE Your AFISCOOTER C is equipped with a manual freewheel lever
that, when pushed forward, allows the AFISCOOTER C to be pushed. For more
information about how to place your AFISCOOTER C in and out of freewheel mode,
see Chapter 4 General description of the AFISCOOTER C. WARNING! When your
AFISCOOTER C is in freewheel mode, the parking system is disengaged.
Disengage the drive motors only on a level surface. Ensure the key is removed
from the key switch. Stand beside the AFISCOOTER C to engage or disengage
freewheel mode. Never do
this while sitting on the AFISCOOTER C. After you have finished pushing your
AFISCOOTER C, always return it to the drive
mode to lock the brakes (pull the manual freewheel lever backward). An added
feature built into the AFISCOOTER C is “push-too-fast” protection, which
safeguards it against gaining excessive speed while in freewheel mode. Push-
too-fast operates in two different modes: If the key is in the OFF position
while the AFISCOOTER C is in freewheel mode, the
AFISCOOTER C’s controller activates regenerative braking when it is pushed
faster than the pre-programmed maximum threshold. In this case, the controller
is acting as a speed governor. If the key is in the ON position while the
AFISCOOTER C is in freewheel mode, you will encounter considerable resistance
at any speed. This prevents the AFISCOOTER C from gaining unwanted momentum
should the freewheel lever be raised inadvertently while you are driving the
AFISCOOTER C. When using this lever, be careful not to touch the internal
surface of the motor, as it could be very hot and cause injury. See the
warning label at the rear of the scooter near the lever.
STAIRS AND ESCALATORS AFISCOOTER C scooters are not designed to travel up or
down stairs or escalators. Always use an elevator. WARNING! Do not use your
AFISCOOTER C scooter to negotiate steps or escalators.
DOORS Determine whether the door opens toward or away from you. Use your hand
to turn the knob or to push the handle or push-bar. If the door opens away
from you, drive your AFISCOOTER C gently and slowly
forward to push the door open. If the door opens towards you, drive your
AFISCOOTER C gently and slowly backwards to pull the door open. S A F E T Y
ELEVATORS Modern elevators have a safety mechanism on the edge of the door
that, when pushed, reopens the door(s). If you are in the doorway of an
elevator when the door(s) begin to close, push on the rubber door edge or
allow the rubber door edge to contact the AFISCOOTER C; and the door will
reopen. Take care that handbags, packages, or AFISCOOTER C accessories do not
become caught in elevator doors. NOTE: Sometimes manoeuvring your AFISCOOTER C
may be difficult in elevators and building entrances. Use caution when
attempting to manoeuvre your AFISCOOTER C in small spaces, and avoid areas
that might pose a problem.
17
“
LIFTS/ELEVATION PRODUCTS If you travel with your AFISCOOTER C, you may find it
necessary to use a lift or elevation product to aid in transportation. We
recommend that you closely review the manufacturer’s instructions,
specifications, and safety information before using the lift/elevation
product. WARNING! Never sit on your AFISCOOTER C when it is being used with
any type of lift/elevation product. Your AFISCOOTER C was not designed for
such use, and any damage or injury resulting from such use is your
responsibility only.
BATTERIES (see also Replacing Batteries, page 28) In addition to the following
warnings below, be sure to comply with all other battery handling information.
MANDATORY! Battery posts, terminals, and related accessories contain lead and
lead compounds. Wear goggles and gloves when handling batteries, and wash
hands after handling.
WARNING! Scooter batteries are heavy. (See Appendix A Specification Sheet).
If you are unable to lift that much weight, be sure to get help. Use proper
lifting techniques and avoid lifting beyond your capacity.
WARNING! Always protect the batteries from freezing and never charge a frozen
battery.
WARNING! Connect the battery cables correctly. RED (+) cables must be
connected to positive (+) battery terminals/posts and BLACK (-) cables must be
connected to negative ( ) battery terminals/posts. REPLACE damaged cables
immediately. Protective caps must be installed over all battery terminals.
NOTE: If the battery is damaged or cracked, immediately enclose it in a
plastic bag and contact your local waste disposal agency or authorized
AFISCOOTER C dealer for instructions for recycling.
MOTOR VEHICLE TRANSPORTATION The manufacturer recommends that you do not
remain seated in your AFISCOOTER C while travelling in a motor vehicle. The
AFISCOOTER C should be stowed in the boot of a car or in the back of a truck
or van with the batteries removed and properly secured. In addition, all
removable AFISCOOTER C parts, including the armrests, seat, and shroud, should
be removed and/or properly secured during transportation. WARNING! Although
your AFISCOOTER C may be equipped with an optional tie-down belt, this belt is
not designed to provide restraint during motor vehicle transportation. Anyone
travelling in a motor vehicle must be properly secured in the motor vehicle
seat with securely fastened seat belts. WARNING! Do not sit on your AFISCOOTER
C while it is in a moving vehicle. WARNING! Always be sure your AFISCOOTER C
and its batteries are properly secured when it is being transported. Batteries
must be secured in an upright position, and protective caps must be installed
on the battery terminals. Batteries must not be transported with any flammable
or combustible items.
TIE-DOWN BELT Although your AFISCOOTER C may be equipped with an optional tie-
down belt, this belt is not designed to provide restraint during motor vehicle
transportation. Anyone travelling in a motor vehicle must be properly secured
in the motor vehicle seat with securely fastened seat belts.
18
“
WARNING! Do not sit on your AFISCOOTER C while it is in a moving vehicle.
WARNING! Ensure your AFISCOOTER C and its batteries are properly secured
during transportation.
PREVENTING UNINTENDED TRAVEL WARNING! If you anticipate being stationary for
an extended period of time, turn off the power. This will prevent unexpected
travel caused by accidentally touching the throttle control lever.
GETTING ONTO AND OFF YOUR AFISCOOTER C
Getting onto and off your AFISCOOTER C requires a good sense of balance.
Please observe the following safety tips when getting on and off your
AFISCOOTER C:
Remove the key from the key switch. Ensure that your AFISCOOTER C is not in
freewheel mode (see Chapter 4 – General description of the AFISCOOTER C).
Ensure that the seat is secured in place. Pivot the armrests up WARNING!
Position yourself as far back as possible in the seat to prevent the
AFISCOOTER C from tipping and causing injury. WARNING! Avoid putting all of
your weight on the AFISCOOTER C armrests, and do not make the armrests bear
weight, such as during transfers. Such use may cause the AFISCOOTER C to tip,
resulting in a fall from the AFISCOOTER C and/or personal injury. WARNING!
Avoid putting all of your weight on the floorboard. Such use may cause the
AFISCOOTER C to tip.
REACHING AND BENDING Avoid reaching or bending while driving your AFISCOOTER
C. Bending forward creates the risk of accidentally contacting the throttle
control lever. Bending to the side while seated creates the risk of tipping.
It is important to maintain a stable centre of gravity to keep the AFISCOOTER
C from tipping. We recommend that you determine your personal limitations and
practice bending and reaching in the presence of a qualified attendant.
WARNING! Do not bend, lean, or reach for objects if you have to pick them up
from the AFISCOOTER C deck or from either side of the AFISCOOTER C such as
these may change your centre of gravity and the weight distribution of the
AFISCOOTER C, causing it to tip.
PROHIBITED! Keep your hands away from the tyres and wheels when driving. Be
aware that loose-fitting clothing can be caught in tyres and wheels.
PRESCRIPTION DRUGS/PHYSICAL LIMITATIONS The AFISCOOTER C user must exercise
care and common sense when operating the AFISCOOTER C. This includes awareness
of safety issues when taking prescription/ over-the-counter drugs or when the
user has specific physical limitations. WARNING! Consult with your physician
if you are taking prescription or over-the-counter medication or if you have
certain physical limitations. Some medications and limitations may impair your
ability to operate your AFISCOOTER C in a safe manner.
ALCOHOL/SMOKING
19
“
The AFISCOOTER C user must exercise care and common sense when operating the
AFISCOOTER C. This includes awareness of safety issues while under the
influence of alcohol, or while smoking. WARNING! Do not operate your
AFISCOOTER C while you are under the influence of alcohol, as this may impair
your ability to operate the AFISCOOTER C in a safe manner. WARNING! The
manufacturer strongly recommends that you do not smoke while seated on your
AFISCOOTER C, although the AFISCOOTER C seat has passed the necessary testing
requirements for resistance to ignition According to EN 1021-2:2006. You must
adhere to the following safety guidelines if you decide to smoke cigarettes
while seated on your AFISCOOTER C. Do not leave lit cigarettes unattended.
Keep ashtrays a safe distance from the seat cushions. Always make sure
cigarettes are completely extinguished before disposal.
ELECTROMAGNETIC AND RADIO FREQUENCY INTERFERENCE (EMI/RFI) WARNING! Laboratory
tests have shown that electromagnetic and radio frequency waves can have an
adverse affect on the performance of electrically powered mobility vehicles.
EMI/RFI can come from sources such as cellular phones, mobile two-way
radios (such as walkie-talkies), radio stations, TV stations, amateur radio
(HAM) transmitters, wireless computer links, microwave signals, paging
transmitters and mediumrange mobile transceivers used by emergency vehicles.
In some cases, they can cause unintended movement or damage to the control
system. Every electrically powered mobility vehicle has an immunity (or
resistance) to EMI. The higher the immunity level, the greater the protection
against EMI. This product has been tested and has passed at an immunity level
of 20 V/M. WARNING! Be aware that cell phones, two-way radios, laptops, and
other types of radio transmitters may cause unintended movement of your
electrically powered AFISCOOTER C due to EMI. Exercise caution when using any
of these items while operating your AFISCOOTER C and avoid coming into close
proximity of radio and TV stations. WARNING! The addition of accessories or
components to an electrically powered mobility vehicle can increase its
susceptibility to EMI. Do not modify your AFISCOOTER C in any way not
authorized by the manufacturer. WARNING! The AFISCOOTER Citself can interfere
with other electrical devices located nearby, such as alarm systems. NOTE: For
further information on EMI/RFI refer to chapter 10 or ask your authorized
dealer.
20
“
CHAPTER 4 GENERAL DESCRIPTION OF THE AFISCOOTER C
Note: The numbers in parentheses refer to the parts illustrated on Figures 1,
2, and 3.
Figure 1
Figure 2
Figure 3 21
“
Plate with serial number and manufacturer’s data (1.2) Tiller (1) / Handlebars
(1)
Mirror (4.1) Throttle control lever (1.3) Brake lever (1.12) Charging socket
(1.4) Handlebar adjustment lever (1.5)
Front basket (1.7) Headlight (1.8) and front blinkers (1.8) USB Charger(1.20)
Battery cover (2) Fuses (2.1a, 2.1b)
EMB manual release (2.2)
Serial number and manufacturer’s data are on a plate on the mud guard in front
of your foot. Your AFISCOOTER C is designed for either hand operation, but it
is delivered with right-hand controls. Left-hand controls can be set up by
your dealer.
Every AFISCOOTER C has either 1 or 2 rear-view mirrors. Used to control the
AFISCOOTER C speed. Used to brake in emergency conditions or when needed. Used
to connect the charger plug to charge the battery. The handlebar can be
adjusted forward or backward. Release the lever, make the adjustment, and
return the lever to the locked position.
For carrying parcels and personal effects. Maximum load 5 kg (11 lbs). (A)
Headlight for poor visibility conditions (B) Blinkers for turnings signals Use
for charger mobile phone Protects the power unit, electronics and batteries.
2.1a – Main fuse 70A Semi Automatic 2.1b – Charge fuse 10A Semi
Automatic Located between the rear wheel and the battery cover. A manual
release lever at the back of AFISCOOTER C lets you push or pull it. Push /
Pull the lever as shown on the label:
Rear Bumper (2.2) Rear pilot & brake lights (2.2) Rear blinkers (2.2) Seat (3)
Armrests (3.4)
Seat forward/reverse lever (3.1) Seat rotation lever (3.2) Floor (4)
= Release (Push),
= Engaged (Drive).
When the lever is in the released position
AFISCOOTER C cannot be operated / driven.
Note: After Lever is operated, you will need to
Reset the system= key switch OFF and ON again.
Note: Never release the lever when the
AFISCOOTER C is on a slope.
AFISCOOTER C seat is equipped with folding armrests (7.3) to allow convenient
access to the seat. The seat itself can be rotated to allow easy access. Use
for comfortable entrance. May be folded upwards Used to move the seat forward
and backward.
Used to swivel the seat 45 or 90 in either direction. Covered with carpet that
may be removed for cleaning.
22
“
CHAPTER 5 ADJUSTMENT INSTRUCTIONS
(Numbers refer to Figures 4 and 5)
Adjusting the tiller
Adjust the angle of the tiller as follows:
angle (1.5)
Release the tiller adjustment lever (1.5), by pushing it
down.
Release the lever at the desired place.
Adjusting the
Handlebar height can be adjusted about 25mm by a technician.
handlebar height
Seating in the
Before attempting to drive AFISCOOTER C, make sure the plug
AFISCOOTER C
is disconnected from the charging socket (1.4).
Note: While the plug is in the charging socket, AFISCOOTER C cannot be operated.
Handlebars and hand protectors Adjusting the shock absorbers to the user
Use the seat rotation lever (3.2) to rotate the seat sideways, and raise the
armrest (3.4) to give you easy access to the seat. Use the seat
forward/reverse lever (3.1) to adjust the location of the seat. When driving
always keep your hands on the handlebars (1) and within the hand protectors.
It is possible to adjust the rear shock absorber to the required load, or way
of using AFISCOOTER C. If necessary, ask a technician to adjust the absorbers
for your needs.
Figure 4
Figure 5
23
“
CHAPTER 6 OPERATING INSTRUCTIONS 6.1 GENERAL
Figure 6
(Numbers refer to Figures 6 and 7)
Key switch The main key switch is located at the top of the tiller box (1).
(1.17)
The key switch has two positions: OFF – The AFISCOOTER C cannot be driven and the EMB is locked. ON – Power is supplied to the AFISCOOTER C and the EMB is
released automatically when the throttle control lever is squeezed.
To operate the AFISCOOTER C, insert the key in the key switch and
turn it to ON (clockwise). The switch will remain in this position and the
green LED (5.2) will be lit.
Note: The key switch is used to operate AFISCOOTER C, not for locking.
Automatic When the key switch is in ON, the control system will be shut off
shut off
automatically after a few minutes (usually 20) in order to save battery
energy.
In the case of automatic shut-off, turn the key switch OFF and then ON
again.
Adjusting the The handbrake cable mechanism can be adjusted by an authorized
handbrake technician.
The handbrake is part of your safety system.
DO NOT adjust it yourself–get professional assistance!
Throttle
To drive: Gently squeeze the throttle control lever (1.3) until you reach the
control lever desired speed. Your speed is directly proportional to the deflection of the
and manual throttle control lever.
handbrake To stop: Release the throttle control lever (1.3). The AFISCOOTER C will
stop gradually, automatically.
Note: You can also use the manual handbrake for emergency
stopping (1.12).
Signalling
Before you turn, press the applicable turn signal switch:
left or right (1.15) To turn off the indicator, press the switch forward.
24
“
Buzzer buttons (1.14)
Headlight switch (1.13) Hazard button (1.16) Inhibit while charging Safe
driving / Half speed switch (1.11)
LCD (5.1)
When a turn indicator is activated, the applicable LED will flash. Depending
on the model, a buzzer may also sound (subject to local regulations). To turn
off the indicator, press the button again. Push one of the 2 Buttons (1.14) to
activate the buzzer. The buzzer sounds automatically under the following
conditions (except where prohibited by law),: 1. When reversing 2. When
operating the left or right indicator
Remark: It is possible to change the Buzzer functionality by changing a dip
switch in the front board .This needs to be done by an authorized technician.
To turn on the headlight and rear lights, press the Lights button (1.13). When
the lights are ON the lights led (5.6) is lit. To turn off the lights, press
the button again.
The Hazard button activates all the flashing lights on AFISCOOTER C. To turn
off the hazard lights, press the button again. When the hazard lights are
activated, both LEDs (5.3 & 5.4) flash. When AFISCOOTER C is being charged, it
is in inhibiting mode. In this mode it cannot be driven. When being charged a
signal will be lit. When driving on ramps, high curbs and on sharp turns,
drive very slowly and carefully, consider changing the Half Speed Switch
(1.11) to Half speed mode. Never try to go over an obstacle that is more than
the maximum recommended slope angle, and obstacle height given in the
specification sheet. Always drive carefully and adjust your speed to the road
conditions. Before making sharp turns, reduce AFISCOOTER C speed, to Half
Speed, to prevent side roll-over. When driving and operating the AFISCOOTER S,
all the required information is displayed on the LCD screen
MODE and RESET button (1.21)
Setup button (1.22) Parking
The MODE / RESET button will change the digital reading from Speed to Travel
Distance or Time. The distance is shown in km, or miles and the time displayed
in hours. (Note: Setting the speed unit can be done by a technician. When you
push the MODE button to the modes: “travel time” and “travel distance” and
keep pushing it for more than 7 seconds, the “travel time” and “travel
distance” will reset to zero. The Setup button is used to set the clock.
After stopping AFISCOOTER C, turn the key switch (1.17) to OFF and remove the
key. The LED will turn OFF. Note: The EMB locks automatically when the
throttle control lever is released and AFISCOOTER C has come to a complete
stop.
25
“
6.2 LCD DISPLAY USE
LCD Display Key Battery status Indicator
Fault indicator Light indicator
When driving and operating the AFISCOOTER S, all the required information is
displayed on the LCD screen (5.1). See details below.
The Battery Capacity Indicator (8) on the LCD screen, displays the remaining
battery capacity. Like petrol gauges in cars, the indicator is not absolutely
accurate; it is merely a guide to help you stop running out of fuel. The
accuracy of the indicator also depends on the type and age of the batteries.
When the indicator shows 2-3 bars, recharge batteries as soon as possible.
When the indicator displays one blinking bar, recharge immediately. You can
only drive a short distance (3-4 km on level surface). The accuracy of the
battery indicator reading also depends on the type and age of the batteries.
AFISCOOTER C is equipped with fault indication. The fault indication appears
as a flashing code of the battery indicator, as well as an error code on the
LCD screen (1.1). For further details see AFISCOOTER Maintenance Manual.
When the main lights are ON (front and rear) a sign will be lit (2).
Blinker indicators Half speed indicator Alarm indicator
Speed display (1)
When the blinkers are ON, signs will be lit 3 and / or 4.
When the Half Speed switch (1/2) is at the Half Speed position, a sign of
“1/2” will be lit (5). When one of the following conditions exists: Motor
overheating, panic brake was operated or manual release brake is in the OPEN
position, or electric EMB is opened, the alarm indicator will be lit (7).
The LCD screen digital area will display the speed of AFISCOOTER C The speed
is shown in kph or mph. The setting can be done by a technician.
26
“
Motor high temperature indicator (6) Clock setup
Not relevant
When changing to clock mode with the MODE button, press it for 7 seconds and you will enter the Setup mode of the clock. Adjusting the clock : Use the left Setup button and the right Mode button as follows: Every push on Mode changes the time unit and the selected unit flashes. During the flashing, every push on Setup increases 1 unit.
Stage Display
Flashing
1
HH:mm
mm
2
HH:mm
HH
3
DD.MM or MM.DD DD
4
DD.MM or MM.DD MM
5
20YY
YY
6
Saving the updated time and date
6.3 DRIVING AND GENERAL USE
Climbing an
To climb an Obstacle, drive the AFISCOOTER C forward toward the
27
“
obstacle
Driving on slopes and turns
obstacle until the front wheel touches the obstacle, then, maintaining your direction, increase speed. Before making sharp turns, particularly on inclines, reduce speed to minimum,
to prevent side roll-over.
AFISCOOTER C is able to go up slopes steeper than the recommended safe slope. Do not drive on inclines where you are not sure about the slope degree. However drive very slowly and avoid side angles higher than 18% (10°).
Prior to use
Controller programming Performance check
Prior to use
SafetySeat belt Securing the
AFISCOOTER C
in motor vehicle for transportation
After reading through this entire manual and before using AFISCOOTER C, do a
visual check of all the parts of the vehicle, to make sure that there is no
visible damage. If you have any questions or concerns, contact your dealer.
Several parameters of AFISCOOTER C controller can be programmed. Programming
must be done by trained authorized technician only. Incorrect programming can
cause abnormal operation of AFISCOOTER C and may result in damage and personal
injury.
A performance check is highly recommended when you first receive your
AFISCOOTER C or after a period of not using the AFISCOOTER CS, as follows:
1. Turn on the key switch. 2. Verify that both the green ON LED and the
battery status indicator
are lit. 3. Slowly squeeze the drive control lever and verify that the
AFISCOOTER C travels at a speed that corresponds to the degree to which you
are squeezing the lever. 4. Release the throttle control lever and verify that
the AFISCOOTER C stops smoothly, and that you hear the click of the EMB
engaging. 5. Check that all the buttons on the handlebar work correctly. 6.
Switch off the key switch. Your AFISCOOTER C is now ready to drive.
Before using the AFISCOOTER C, be sure you know your own weight and the weight
of any items you will be carrying on it. The maximum total load is 135 kg (300
lbs) 3 WHEELS /150 kg (330 lbs) 4 WHEELS. (Depending on the model).
Use a seat belt whenever it is needed for as anterior pelvic support or as
required by local traffic regulations. A seat belt can be ordered from local
supplier (see options for AFISCOOTER C in Appendix A) .
To transport the AFISCOOTER C in a motor vehicle, it must be secured (see
Figure 8). Using standard approved tiding straps, secure the 4 tiding ear
plates painted in Yellow (2 at the front and 2 at the rear of the scooter), to
the car secure hooks. Warning: When transporting the AFISCOOTER C, never let
anyone sit on it.
28
“
Transportation
Figure 8 To reduce the height of AFISCOOTER C while transporting it, the seat can be removed as explained in Chapter 8 Maintenance, and the handlebar column can be folded to horizontal position.
29
“
CHAPTER 7 CHARGING
Read the charger manual before using it.
Warning: If you use a charger other than the one supplied with your AFISCOOTER
C, ask your dealer for instructions.
CHARGING BATTERIES (See figure 9) 1. Insert the charger plug (8) in the
charging socket (10) located on the right side of the
tiller column. 2. Plug the charger power cord (9) into a wall socket (11). 3.
When charging is complete, remove the charger power cord (9) from the wall
socket
(11) and then remove the charger plug (8) from the charging socket (10). 4.
Under ideal storage conditions, batteries that were charged to full capacity
and were not
used should be recharged every 6 months. . If you expect not to use your
AFISCOOTER C for an extended period of time, we
recommend charging it for two days and then disconnecting the batteries. 5. If
you have not used your AFISCOOTER C for an extended period of time, charge the
batteries for at least 24 hours before driving.
Recommended Charging routine 1. Use the scooter along the day as needed or
until charging is low , according to the LCD
battery indicator.
2. At the end of the day, recharge the scooter batteries along the night.
3. No need to disconnect the batteries at the end of the charging. The
charger is Automatic and stops itself.
4. No need to recharge the scooter batteries at the end of every drive,
unless you are not intending to use the scooter any more on that day.
5. In case of recharge the scooter along the day, you should perform full
charging.
6. It is not recommended to leave the batteries uncharged for a few days as
it can reduce the travel distance and battery’s life.
As long as the charging plug is in the charging socket, the electronic control
of the AFISCOOTER C automatically cuts all power to the electric system and it
cannot be driven.
The charger supplied is suitable for charging lead acid dry/gel batteries. Use
only the defined type of charger. Before using any other type of charger,
check with your dealer.
Figure 10
30
“
CHAPTER 8 MAINTENANCE
Note: 1. Maintenance Manual is available for trained technicians. 2. The
numbers in parentheses refer to the parts illustrated in figure 11.
Although the AFISCOOTER C requires very little maintenance, do not neglect it.
The expected service life is of the AFISCOOTER C is 7 years and it will extend
much longer provided care and maintenance procedures are carefully followed.
When performing maintenance procedures on the AFISCOOTER C, make sure that it
stands on a level surface and that the key is not inserted.
Periodic Maintenance Procedures
Remark: For periodic maintenance, no special tools are needed.
No.
Type of Service
Frequency
1 Check air pressure in all tyres.
Every week
2 Check emergency brakes
Every week
3 Check normal driving and stopping
Every Month
4 Check tyre wear
Every Month
5
Check for missing and damaged parts When first receiving AFISCOOTER C
(see Figures 1 through 4).
or after a long time without using it.
6 Check that all screws and parts are Once a year by a technician. secure
7 Replace batteries
Every 2-3 years,
(To replace the batteries, the seat and the battery cover (which is located under the seat) must be removed.)
After about 300-400 full cycles of charge/discharge,
When the distance you can
travel on a single charge
becomes short, or
After a technician recommends
replacing it.
Used batteries should not be disposed of with the regular garbage. For
information on proper disposal of your batteries contact your
authorized dealer
8 Cleaning
External when needed.
Internal Once a year by
technician.
Recommended periodic Performance checks
Slow or Sluggish Movement If the scooter does not travel at full speed and the
battery condition is good, check the position of the speed limiting control.
If adjusting the speed limiting control does not remedy the problem then there
may be a non-hazardous fault. Contact your service agent.
User Daily Checks Throttle: With the scooter switched off, check that the
throttle mechanism is not bent or damaged and that it returns to the position
when you push and release it. If there is a problem do not continue with the
safety checks and contact your service agent.
31
“
User Weekly Checks Throttle: Put the throttle to the full speed forward position and switch the scooter on. The scooter should not move. show you that you have switched the scooter on with the throttle already pushed. If the scooter does move, contact your service agent. Parking brake: This test should be carried out on a level surface with at least one meter clear space around the scooter. Switch the scooter on. Check that the status indicator remains on, or flashes slowly, after half a second. Go to drive the scooter slowly in the forwards direction until you hear the parking brake operate. The scooter may start to move. Immediately release the throttle. You must be able to hear the parking brake operate within a few seconds. Repeat the test in the reverse direction. Cables and connectors: Check that all connectors on the scooter are securely mated, and ensure that all cables are free from damage.
As-required Detailed Maintenance Procedures
Type of Service Removing the seat and the Batteries Cover (2)
Removing and replacing the battery cover (2) Batteries Tyres
Cleaning
Frequency Turn the seat by turning the lever (7.5) 45º (either direction). The seat can be removed only at this angle. Removing the seat -(7) Holding the seat with one hand on the backrest, and the other at the front, lift it off the seat-mounting post. Warning! The seat weighs 20 kg (44 lbs). The seat must be lifted by two people or by an adequate lifting equipment. Replace the battery cover, re-install it over the seatmounting post, and make sure it is seated properly, and then secure it with the five screws. To replace the battery cover, re-install it over the seat-mounting post and make sure it is seated properly, then secure it with the four screws (2.6). Each battery weighs 23 kg (50.6 lbs). The batteries must be lifted by two people or by an adequate lifting equipment. Correct tyre pressure is essential for steering and stability. Check the tyre pressure every two weeks 25 ±2 psi. AFISCOOTER 4W front tires: 20±2 psi. Use only a damp cloth and mild detergent for cleaning. Never use a hose, as this may severely damage the power and electronic components.
32
“
Type of Service Replace batteries
Frequency Note! Batteries must be replaced by trained professionals only.
Warning! Batteries contain high energy and can spark, resulting in a possible
fire hazard. Warning! Working with batteries can cause damage and Injury if
not done properly. In this procedure, refer to Figure 12. 1. Remove the
terminal insulating cap from one battery
terminal. 2. Using a 10/13 mm key, unscrew the wiring from the terminal.
Take care not to let the key touch any other terminal or metal part, as this
could cause damage or injury. 3. Repeat steps 1 and 2 for all the other
terminals. 4. Remove the old batteries and install the new ones. 5. Connect
the wires of the new batteries as shown in Figure 11 (also shown on the label
located near the batteries). 6. Screw down the terminals securely, and replace
the insulating caps.
33
“
Figure 11 34
“
CHAPTER 9 STORAGE
In Case of Long-term storage e.g. longer than four months, it is recommended
to store the Afiscooter C in a dry, clean and secure space, ideally with a
access to electricity socket so you can charge it. During storage it is
recommended that the Afiscooter C is covered and a closed Always. When the
scooter is not in regular use, recharge the battery at least once a month
until normal use is resumed. If you have left the power switch on or your
product has not been charged for a long period of time, We do not recommend
storing your Afiscooter C in extremely cold conditions. Storing in
temperatures below 10º Celsius diminishes runtime and battery capacity.
WARNING: DO NOT ALLOW TO FREEZE, DO NOT STORE BELOW 0ºC’ this could
permanently damage your battery
35
“
CHAPTER 10 TROUBLESHOOTING AND REPAIR
The following table provides troubleshooting and repair instructions for problems that may be encountered when operating the AFISCOOTER C. as well as the best way to correct the problem. The table contains three columns:
Symptom The problem you are experiencing
Probable Cause
Remedy
The most likely causes, in order of Recommended action to
probability (most likely first)
correct each probable cause
Remember: you can contact your dealer at any time for further professional support.
No. 1
2 4 5
6
Symptom Flat tyre and unstable driving.
The LEDs flash and the vehicle does not move. Handbrake is fully engaged but
the vehicle does not stop. When throttle control lever is released on a level
surface, the AFISCOOTER C takes longer than 3 meters to stop. Key switch is
turned ON but the ON light does not come on.
Probable Causes Low air pressure Puncture
(identified by the fault code)
Loose handbrake mechanism
Controller is faulty or out of adjustment
Main fuse 50A popped or electrical fault. (See 2.1 in Fig. 1)
Remedy Pump tyre to normal pressure (see
‘As-required Detailed Maintenance Procedures’) Repair tyre Call for technical
support
Brake cable needs to be tight. Only by authorized technician.
Call for technical support
Reset fuse Note: Do not reset fuse more than twice. If the symptom still
recurs, call your authorized dealer for support.
7 AFISCOOTER C does not Key switch is OFF
move when you squeeze
Charger is connected to
Turn key switch ON Disconnect charger
the throttle control lever.
charging socket The release lever of the
Engage the EMB lever.
EMB is disengaged.
Other inhibitor: Panic
Turn the key switch OFF and ON again.
brake.
Call for technical support
Control system failure
8 Intermittent drive.
Battery capacity is low Faulty connections
Charge batteries for at least 18 hours Remove battery cover and check battery
connection. If terminals are corroded, clean
them with a damp, clean cloth
Faulty battery
If red LEDs are still on, contact your
dealer for a replacement battery
9 Main or rear lights or indicator Faulty LED light board or Call technician for assistance.
lights are inoperative.
electronics fault
10 When driving uphill or carrying The Controller became heavy loads, speed reduces overheated gradually (but scooter still moves).
Stop driving and let controller cool
36
“
Controller Fault codes shown on the display:
The display can show the controllers fault code in two different ways, set by
parameter 8 in the display settings:
1. Error code displayed on alphanumeric display: ERR01 bad connection to
the battery. ERR02 Bad connection to the motor. ERR03 The motor has a
short circuit to a battery connection. ERR04 The Freewheel is activated
while driving. ERR06 Electro-magnetic brake is manually open or panic button
was pressed. ERR07 A Throttle fault is detected. ERR08 Controller error
make sure all connectors are fastened. ERR09 Bad connection between
controller and electro-magnetic brake. ERR10 An excessive voltage has been
applied to the controller. Check the battery connections.
2. Error code shown as a series of flashing signals on the error indicator:
37
“
CHAPTER 11 EMI WARNING
All types of electrically powered vehicles, such as powered wheelchairs and
motorized scooters (in this text all types will be referred to as “powered
vehicles”) may be susceptible to electromagnetic interference (EMI). This is
from sources such as radio and TV stations, amateur radio (HAM) transmitters,
two-way radios and cellular phones. The interference (from radio wave sources)
can cause the powered vehicle to release its brakes, move by itself, or move
in unintended direction. It can also damage the powered vehicle’s control
system. The intensity of the interfering EM energy can be measured in volts
per meter (V/m). Each powered vehicle can resist EMI interfering
electromagnetic energy (EM) emitted up to a certain intensity. This is called
its “immunity level”. The higher the immunity level, the greater the
protection. At this time, current technology is capable of achieving an
immunity level that would provide useful protection from the more common
sources of radiated EMI. This vehicle as shipped, with no further
modification, has an immunity level of 20 V/m. There are a number of sources
of relatively intense electromagnetic fields in the everyday environment. Some
of these sources are obvious and easy to avoid. Others are not apparent and
exposure is unavoidable. However, we believe that by following the warning
listed below, your risk of EMI will be minimized. The sources of radiated EMI
can be broadly classified into three types: 1. Hand-held portable transceivers
(transmitters-receivers) with the antenna mounted directly on the transmitting
unit. Examples include: citizen band (CB) radios, “walkie talkies”, security,
fire and police transceivers, cellular telephones and other personal
communication devices. NOTE: Some cellular telephones and similar devices
transmit signals while they are ON, even when not being used. 2. Medium-range
mobile transceivers such as those used in police cars, fire trucks, ambulances
and taxis. These usually have the antenna mounted on the outside of the
vehicle. 3. Long-range transmitters and transceivers such as commercial
broadcast transmitters (radio and TV broadcast antenna towers) and amateur
(HAM) radios. NOTE: Other types of hand held devices, such as cordless phones,
laptop computers, AM/FM radios, TV sets, CD players, cassette players and
small appliances such as electric shavers and hair dryers, as far as we know,
are not likely to cause EMI problems to your powered vehicle.
Powered Vehicle Electromagnetic Interference (EMI) Because EM energy rapidly
becomes more intense as one moves closer to the transmitting antenna, the EM
field from hand-held radio wave sources (transceivers) are of special concern.
It is possible to unintentionally bring high levels of EM energy close to the
powered vehicle’s control system while using these devices. This can affect
powered vehicle movement and braking.
Therefore, the warnings listed below are recommended to prevent possible
interference with the control system of the powered vehicle. WARNINGS
Electromagnetic interference (EMI) from sources such as radio and TV stations,
amateur radio (HAM) transmitters, twoway radios and cellular phones can affect
powered vehicles. Following the warnings listed below should reduce the chance
of unintended brake release or powered vehicle movement which could result in
serious injury: 1) Do not operate hand-held transceivers (transmitters-
receivers) such as citizen band (CB) radios, or turn ON personal communication
devices such as cellular phones, while the powered vehicle is ON; 2)Be aware
of nearby transmitters, such as radio or TV stations and try to avoid coming
close to them. 3) On appearance of unintended movements or brake release
occurrences, switch the powered vehicle OFF as it is safe to do so. 4) Be
aware that adding accessories or components, or modifying the powered vehicle,
may make it more susceptible to EMI (since there is no easy way to evaluate
their effect on the overall immunity level of the powered vehicle). 5) Please
report to us all incidents of unintended movement or brake release and note
whether there is a source of EMI nearby. Important information 1) 20 volts per
meter (V/m) is a generally achievable and useful immunity level against EMI
(as of May 1994). The higher the level the greater the protection; 2) This
product delivered to you has an immunity level of 20 V/m.
38
“
Appendix A Specification Sheet
Type: AFISCOOTER C3/C4
Manufacturer: Kibbutz Afikim 15148, Israel
Maximum occupant mass: 150 kg (for the tests, a 100kg (220 lbs) dummy according ISO 7176-11 was used,
supplemented by 50kg(110lbs) weights distributed approximately proportional to the dummy’s weight distrib.)
(Metric table)
Disclosure information (ISO 7176-15)
Standard reference
min.
max. Standard reference
min.
max.
Overall length with-4w leg 1366mm
Seat plane angle
3
rest
– 3w 1300mm
Overall width
665 m
Effective seat depth
450 mm
Folded length
Effective seat width
460 mm
Folded height
805mm
Seat surface height at front edge 660 mm
Total mass
– 4w 122 kg
Backrest angle
-3w 102kg Mass of the heaviest part
Backrest height
520 mm
Static stability downhill
Foot rest to seat distance
255 mm
Static stability uphill
13
Leg to seat surface angle
93
Static stability sideways 10
14
Armrest to seat distance
160 mm
Energy consumption
Front location of armrest structure 280 mm
Dynamic stability uphill
Handlebar diameter
65mm
Obstacle climbing
25 mm
100mm Horizontal location of axle
Maximum speed forward
15km/h Minimum turning radius
12km/h 10km/h
4W 3W —
340 cm 255 cm
Minimum braking
2500 mm
Minimum turn-around radius
distance from max speed (on the flat)
Pneumatic Tires All tires
4.10/3.50-6″
Charger for charging dry/gel acid 24VDC maximum
battery
charge 8 Amp.
Pressure of front tires: Pressure of rear tires:
25 psi 25 psi
Battery type ,Capacity Sealed Lead Acid /Gel/AGM, 2x12V 40-70Ah max.
Battery Dimensions
Dims. L=197mm x W=168mm x H=175mm
Charger
Charge current 8 Amp. maximum
Options
Left-hand drive tiller,
Rear basket
(Inches table)
Disclosure information (ISO 7176-15)
Standard reference
min.
max. Standard reference
min.
max.
Overall length with – 4w 53.7″
Seat plane angle
3
leg rest
– 3w 51.2″
Overall width
26.2″
Effective seat depth
17.7″
Folded length
Effective seat width
18.1″
Folded height
31.7″
Seat surface height at front edge 26″
Total mass
– 4w 268 lb
Backrest angle
– 3w 224 lb
Mass of the heaviest part
Backrest height
20.5″
Static stability downhill
Foot rest to seat distance
10″
Static stability uphill
13
Leg to seat surface angle
93
Static stability sideways 10
14
Armrest to seat distance
6.3″
Energy consumption
Front location of armrest structure 11″
Dynamic stability uphill
Handlebar diameter
2.5″
Obstacle climbing
1″
39.4″ Horizontal location of axle
Maximum speed forward
10 mph Minimum turning radius
8 mph 6.7mph
4W 3W —
134″ 100.4″
Minimum braking
98.4″
Minimum turn-around radius
distance from max speed (on the flat)
Pneumatic Tires All tires
4.10/3.50-6″
Charger for charging dry/gel acid 24VDC maximum
battery
charge 8Amp.
Pressure of front tires:
25 psi
Pressure of rear tires:
25 psi
Battery type ,Capacity Sealed Lead Acid /Gel/AGM, 2x12V 40-70Ah max.
Battery Dimensions
Dims. L=7.7″ x W=6.6″ x H=6.9″
Charger
Charge current 8 Amp. maximum
Options
Left-hand drive tiller,
Rear basket
39
“ Remarks: All technical specifications are subject to change without prior
notice. The maximum speed in every country is limited according local
traffic regulations. Braking distance on slopes can be significantly
greater than on level ground. Date: July 2019 Edition: 02; Revision 01
Products: AFISCOOTER C, 4-Wheel and 3-Wheel P/N of the user manual: PRC4301
40
References
- Afikim Electric VehiclesGlobal leader in developing, manufacturing and marketing Mobility Scooters
- Global IVDs & Medical Device Registration and Market-Access Platform
- Global IVDs & Medical Device Registration and Market-Access Platform
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>