JereH JES-HS60 Handheld Electrostatic Sprayer User Guide
- June 5, 2024
- JereH
Table of Contents
- Important Safety Instructions
- Specific Safety Rules
- Chemicals Safety
- Product Description
- Installation and Assembly
- Bottle Installation & Disassembly
- Operating Procedure
- Maintenance
- Troubleshooting
- Warranty Card
- Packing List
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
JES-HS60
Handheld Electrostatic Sprayer
USER GUIDE
Thank you for choosing JEREH products. We will provide you with professional and timely after-sales service. This product is independently developed by JEREH. It is an ideal product with high intelligence and automation and it has been widely applied in both disinfection and epidemic prevention. This operation & maintenance manual consists of introductions regarding equipment structure, operation, safety, and maintenance. Please read this manual carefully before operation. This manual cannot fully list all problems that may occur during the use of the product. If you have any unsolved problems, please contact our after-sales service staff in your regions.
Important Safety Instructions
Warning
- Please read this manual carefully. Failure to follow the instructions below may result in electric shock, fire, and/or serious personal injury.
- Read and understand the operation manual, and be aware of all safety instructions, tips, and warnings.
- Do NOT operate this product in an explosive environment, such as flammable liquids, gases, and dust. If sparks are generated, dust or smoke may be ignited.
- When operating this product, bystanders or children are not allowed to enter the working area. It may be dangerous to come into contact with certain chemicals.
- This product is suitable for indoor and outdoor use.
- Do NOT expose this product to rain or a humid environment.
- Stay alert when operating the product, pay attention to the operation and use the guide. Do NOT operate the product when tired or under the influence of drugs, alcohol, or medicines.
- Dress properly. Do NOT wear loose clothing or wear jewelry or work with long hair. Keep long hair, clothes, and gloves away from moving parts. Moving parts may get entangled in loose clothes, jewelry or long hair.
- Do NOT use the product on ladders or unstable supports. Working at a stable foothold on a fixed surface can better control the operation of the product in unexpected situations.
- Be careful when walking backward or working on slippery surfaces to avoid tripping or slipping.
- If the switch cannot be turned on or off, please do NOT use the product. Any product that cannot be controlled by a switch is dangerous and must be repaired.
- Please store this product out of the reach of children. Children are forbidden to operate this product. People who are not familiar with this product or this manual are NOT allowed to operate this product.
- Please use this product in accordance with this manual and the stipulated methods. Using the product for out-of-scope operations may lead to dangerous consequences.
- This product should be repaired with qualified replacement parts and by professional maintenance personnel, which will ensure the safety of the product. The instructions in the Maintenance section of this manual should be followed. Use of unauthorized parts or failure to follow maintenance operations may cause the risk of electric shock or injury.
- Don’t let the familiarity after frequent use of products or tools make you complacent and ignore the safety principles. A careless action can cause serious injury in an instant.
- When not in use, the product should be turned off.
Specific Safety Rules
- If you are equipped with an electronic heart pacemaker or implantable cardiac defibrillator (ICD), please do NOT use the electrostatic spray system.
- It is strictly prohibited to use non-water-soluble disinfectant, and do NOT pour hot or boiling liquids into the bottle, as this will damage the spray system.
- To reduce the risk of fire or explosion, liquids with a flash point higher than 140°F (60°C) should be used.
- It is NOT recommended to use bleach or hydrogen peroxide. These chemical reagents will corrode metal parts or reduce the service life of the spray system components such as bottles and pipes.
- Check the equipment before each use to ensure no impurities in the cavity
- Do NOT use powder or abrasive chemicals
- The spray area must be well ventilated.
- Avoid spraying in a windy environment. The liquid may accidentally be sprayed on plants or objects that should not be sprayed.
- Do NOT spray people or pets.
- Do NOT spray the power outlet.
- When using this product, do NOT smoke, and do NOT spray the place with sparks or flames.
- Before using the product, carefully check the positioning and installation of moving parts, damage to parts, installation, and other conditions that may affect its operation. Unless otherwise stated in this manual, damaged parts should be properly repaired or replaced in a repair facility authorized by the manufacturer.
- When the UV disinfection mode is on, do NOT stare directly at the UV light.
- After using this product, do NOT leave residues or liquid in the bottle. Please clean the bottle, pump, and other spray system components after each use.
- When not in use, the product should be stored in a dry, safe, and well-ventilated room and the liquid in the bottle and pipeline should be emptied.
- Keep this product dry and clean, and avoid any oil stains. Be sure to clean this
product with a clean cloth.
Warning
Chemicals and chemical fumes are dangerous. If ingested, splashed, or in
contact with eyes or skin, it can cause serious injury, permanent injury, or
death. In spray mode, keep all parts of the body away from the spray outlet.
When the electrostatic induction function is used to spray a conductive
surface, charges will accumulate on the conductive surface, which may cause
electrostatic shock to the user. It is recommended to bring a secondary
conductive object (such as a key) to touch the surface and dissipate the
charges.
In the use, always pay attention to prevent impurities such as hair and
accessories from entering the air inlet
Chemicals Safety
Read and follow the instructions on the label of the chemical manufacturer and pay attention to the following regulations.
- When using any fungicides or other chemicals, please carefully read the labels on the original packaging and follow the instructions for use. Some chemicals are dangerous and should NOT be used in this product because they can harm the sprayer and cause serious property damage.
- When filling, mixing, and using the liquid, personal protective equipment (PPE) should be worn, including protective clothing, gloves, and hat, eye protection equipment (such as goggles and face shield), and respiratory protection equipment (such as mask, breathing filter, and respirator).
- Understand the symptoms of poisoning and understand the appropriate first aid plan when symptoms of poisoning appear.
- Understand the harm caused by chemicals to the environment and the first aid measures in case of chemical leakage.
- Consult the chemicals manufacturer’s recommendations to know how long to wait before allowing people or animals to return to the spray area.
- Always comply with the general regulations in the areas where chemicals are used.
Battery Safety
- Before disassembling and assembling the battery, please make sure that the battery and the product are clean, dry, free from damage and the power switch is in the off position.
- When the product is being repaired, cleaned or not in use, remove the battery. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.
- Do NOT crush, drop, disassemble, damage or swallow the battery. Do NOT use the battery or chargers after being dropped or hard hit. If the battery is damaged, there is a danger of an explosion. Properly dispose of the dropped or damaged battery immediately.
- Do NOT place the battery or charger near a heat or fire source. The battery may explode in the presence of an ignition source. To reduce the risk of serious personal injury, do NOT use any cordless products under an open flame. An exploded battery can produce debris and chemicals. If it comes in contact with the body, please flush it with water immediately. Check local regulations for proper disposal instructions.
- Do NOT charge the battery in a humid place. Following this rule will reduce the risk of electric shock.
- Under extreme operational or temperature conditions, the battery may leak. If the liquid comes into contact with the skin, wash it off immediately with soap and water. If the liquid gets into your eyes, rinse with clean water for at least 10 minutes and then seek medical advice immediately. Following this rule will reduce the risk of serious personal injury.
- This product can only be used with the original battery. Using other batteries may cause injury or risk of fire.
- Keep the battery away from metal objects, such as paper clips, coins, keys, nails, bolts or other small metal objects that may connect the battery electrode. Short-circuiting both ends of the battery may cause burns or fire.
Safety Tips
There are safety warning stickers on the equipment to remind the equipment
operators to use the equipment correctly and indicate the potential safety
hazards. Even if these warning signs are lost or hidden out of sight, safety
regulations should be followed when operating the equipment. When the safety
tips are worn, damaged, or unrecognized, please replace them in time.
Safety Symbols
To avoid personal injury and ensure the service life of the equipment, you
must keep in mind the content of warnings, cautions, and notes highlighted in
this manual.
Warning: Failure to comply may result in personal injury or death.
Caution: Failure to comply may damage or destroy the product.
Attention: Operating procedures and methods with special attention.
Important Note
It is prohibited to spray flammable and explosive liquids such as alcohol,
kerosene, etc., as well as other special-purpose liquids.
When cleaning, make sure that the product is shut down, the charging cable is
plugged out and the rubber cover of the charging port is fastened. Otherwise,
electric shock or serious failure may be caused by water penetration.
The lithium battery should be firmly fixed on the product; the battery must be
handled with care when disassembling and installing, and violent collisions
are prohibited.
When moving, mixing, using, storing, and handling the liquid, the safety
instructions provided by the liquid manufacturer should be followed.
When used and transported, the product should be protected to prevent
collision, falling and vibration.
Do NOT clean the product with alcohol, gasoline, kerosene or other corrosive,
volatile chemical solvents. Otherwise, the appearance and internal structure
of the product will be seriously damaged.
When spraying electrical appliances, keep the nozzle more than 1 meter away
from the electrical appliances.
It is normal to have a slight feeling of static electricity shock during the
operation, as the mist is charged with static electricity.
Product Description
Model | JES-HS60 |
---|---|
Droplet Diameter | 30-70pm |
Spray Distance | > 2m |
Spray Rate | 80-120m1/min |
Bottle Volume | 700m1 |
Power Source | 24V Lithium Battery |
Duration | 90min |
Dimension | 360x100x275mm |
Weight | 1.9kg (battery included, liquid excluded) |
- Hypochlorous acid, quaternary ammonium salt, chlorine dioxide, and other disinfectants are recommended.
- Avoid using strong corrosive disinfectants.
Installation and Assembly
After receiving the product, please open the package, take the product and
accessories out of the box, and make sure that all the items on the packing
list are received.
When the product is delivered, to ensure transportation safety, the bottle and
battery are placed separately without being installed on the product. Before
working, please follow the instructions to install the bottle and battery.
Attention
Check the product and accessories carefully to ensure that there is no
breakage or damage during transportation If the product is not fully assembled
or any part of the product is missing or damaged, please do NOT use it. Using
incorrect and incomplete-assembled products may cause serious personal injury.
Do NOT attempt to modify this product. Any such modification is misused and
may lead to dangerous consequences, which may result in serious personal
injury. Please do NOT discard the packaging materials before carefully
checking and satisfactorily operating the product. If any part is damaged or
missing, please contact customer service or a repair agency authorized by the
manufacturer.
Bottle Installation & Disassembly
- Align the groove on the mouth of the bottle with the protrusion inside the bottle cap, push the bottle toward the bottle cap, and rotate the bottle clockwise at about 30° to buckle the bottle and the bottle cap.
- When disassembling, rotate the bottle counterclockwise at about 30° to detach the bottle cap.
Caution
Make sure that the liquid inlet pipe and filter are tightly connected before
installing the bottle. To ensure the normal operation of the sprayer, when
filling the liquid, please do NOT exceed the maximum filling line.
Before installing the bottle containing liquid to the sprayer, wipe the
outside of the bottle with a dry cloth to clean up the spillage.
If you use a measuring container or funnel to fill the liquid, be sure to wash
these items thoroughly after use. If the liquid is premixed in the container,
clean the container used for mixing.
Battery Installation & Disassembly
- Align the groove on the bottle mouth with the protrusion inside the bottle cap, and complete the installation by rotating the bottle about 30° in the CLOSE direction to the stopper position
- Disassemble the bottle by rotating the bottle about 30° in the OPEN direction
Operating Procedure
Operating Instructions
- Wear PPE (Personal Protective Equipment) including protective clothing, goggles, respiratory masks, etc. before starting the sprayer.
- Ensure the required dose of liquid in the bottle and the proper battery installation.
- Press and hold the power button for 1 second, the indicator light will stay on and the sprayer will be activated.
- Press the UV switch, and the UV indicator will stay on and the UV mode will be activated; press the UV switch again, and the UV indicator will go off, and the UV mode will be deactivated; the next time when you start up the sprayer, the UV mode will be as same as last time.
- Press the spray switch to start the operation; press the spray switch again to stop the operation.
- In the power-on state, long-press the power button for 1 second, and the indicator light will be off, and the sprayer will shut down.
- When the spray mode and UV mode are both turned off in the power-on state, the sprayer will automatically shut down after 2 minutes.
Battery Charge
- Insert the round end of the charger into the matching battery hub.
- Plug the other end of the charger into the socket.
- The indicator light on the charger shows red, i.e. battery is being charged; the indicator light shows green, i.e. the charging is complete.
Warning
Lithium batteries should be used in a suitable environment temperature, the
charging temperature range is 0~45℃, and the discharge temperature range is
0~60℃. When the product is not in use for a long time, it is necessary to
check the battery power regularly and charge it in time to avoid damage to the
battery due to long-term power loss.
Attention
Keep your hands in contact with the metal handle during spraying. The UV model
is off by default when the sprayer is turned on for the first time. For the
next time when the sprayer is turned on, the UV mode will remain on or off as
same as last time. Use the sprayer in the early morning or evening, especially
in a warm or hot weather, as too high temperature will cause the fog to
evaporate before settlement
Caution
When spraying, the nozzle is recommended to be in the horizontal direction.
When spraying diagonally upwards for a long time, some water droplets will
flow out from the drain hole at the bottom of the handle due to electrostatic
adsorption, which is a normal phenomenon. It is forbidden to press the button
switch frequently to start and stop the
sprayer, and the interval between each start-up should be more than 5 seconds.
Frequent start-up of the sprayer will easily cause the controller failure.
When the last cell of the battery display flashes, it indicates that the power
is insufficient. Please charge it in time, which will eliminate the
possibility of unnecessary battery damage and extend the battery life. When
the battery power is too low, the sprayer will automatically shut down. Do NOT
use the sprayer when it is being charged.
Maintenance
Bottle and Spraying System Cleaning
- Disassemble the bottle, empty the residual liquid in there, or keep the sprayer running to empty the liquid.
- Fill the bottle with 400ml purified water and add a small amount of mild household detergent.
- Wipe the external surface of the bottle with a clean dry cloth.
- Install the bottle on the product and make sure it is fastened in place.
- Start spraying until the bottle is emptied.
- Replenish with purified water and repeat the above steps. It may be necessary to rinse the bottle and Spraying System Cleaning several times, and then drain again according to the above operations.
- Allow all parts to dry completely before reinstallation and storage.
Attention
Clean the spraying system with purified water at least once a day. When
replacing a new liquid, in order to avoid mixing, clean the spray system with
purified water for 2-3 minutes.
Product Cleaning and Storage
- Empty the liquid from the bottle or keep the sprayer running to empty the liquid.
- Fill the bottle with 400ml purified water, start spraying, and after the bottle is emptied, continue spraying for 1-2 minutes to drain the water in the pipeline.
- Wipe the product to remove the dirt on the product surface with a soft cloth dipped in a little water.
- Wipe dry the product with a clean cloth.
- Store the product indoors in a dry and cool place. The service life of the battery will be reduced in an overheated or super-cool environment.
Warning
Do NOT drop or throw the product. Please do NOT attempt to disassemble the
product. When the product is not in use, it is strictly prohibited to store
the liquid in the bottle for more than 24 hours. Equipment working environment
temperature and storage temperature are between 5-55℃.
Nozzle Assembly & Disassembly
Turn off the power switch and let the product stand for about 5 minutes to
disperse the electrostatic charge. Follow the steps below to disassemble and
assemble the nozzle.
- Disassemble the battery.
- Unscrew the nozzle cap with the spray nozzle assembly & disassembly tool.
- Take out the sealing gasket and the nozzle in turn from the nozzle cap.
- When installing, put the nozzle and gasket back into the nozzle cap in turn, and use the nozzle assembly & disassembly tool to tighten the nozzle cap into the fixed seat to prevent leakage.
Nozzle Cleaning
With the increase in operation time, the nozzle will be blocked or damaged,
which will affect the spray volume. Cleaning the inside of the nozzle
regularly can effectively prevent the blockage caused by chemical deposition,
so as to maintain the performance and prolong the service life. Clear up the
nozzle with reference to the steps in “Filter Replacement and Nozzle Cleaning”
If the blockage is still present, replace the nozzle.
Filter Replacement
The filter is located at the bottom of the liquid hose inside the bottle, and
it needs to be checked regularly for possible blockage. In the case of a
damaged or rusty filter, please replace it in time. Replace the filter with
reference to the steps in “Filter Replacement and Nozzle Cleaning”
Maintenance List
Item | Maintenance Item | Maintenance Frequency |
---|---|---|
1 | Thoroughly clean the nozzle with reference to the steps in “Filter | |
Replacement and Nozzle Cleaning” | It is recommended to clean the nozzle every |
20 hours of operations.
2| Regularly check if any blockage of the filter| It is recommended to clean
the nozzle every 20 hours of operations.
3| Check the cleanliness of the inside liquid bottle| It is recommended to
clean the nozzle every 50 hours of operations.
4| Clean the product surface| Clean after each use
5| Check whether the air inlet is blocked| Check before each use
6| Check whether the cooling fan rotates| Check before each use
7| Clean the spraying system| Clean with purified water at least once a day
Troubleshooting
Fault Phenomenon | Cause Analysis | Solutions |
---|---|---|
The spray is intermittent, unstable, and liquid output decreased. | Filter | |
blockage | There is a filter inside the bottle. Check whether it is blocked and |
replace it if necessary.
Nozzle internal blockage Cleaning”| Clean the nozzle with reference to the
steps in “Filter Replacement and Nozzle
Insufficient disinfectant| Add disinfectant to the bottle
Nozzle cap lose| Check whether the nozzle cap is tightened
Pipe leakage| Contact manufacturer for repair
Low battery| Check the battery power, charge or replace the battery in time.
No electrostatic attraction on droplets| Wire damage| Contact manufacturer for
repair
Charging failure| Charger fuse damage or charger| Replace charger fuse or
charger
Fault Phenomenon| Cause Analysis| Solutions
---|---|---
| damage|
Mismatched charging voltage or charger’s positive-negative pole| The original
charger is not selected, please use the original charger.
Battery damage or aging| Replace the battery
Turn on the power switch, the sprayer is not started| Connection of battery
not in place| Connect the battery in place.
Switch button damage| Contact manufacturer for repair
Wire damage| Contact manufacturer for repair
The bottle overflowed during the operation| The bottle cap was not tightened|
Tighten the bottle cap
Bottle broken| Replace the bottle
Seal of a bottle cap or vent film damage| Contact manufacturer for repair
Liquid pump abnormal or not running| Pump motor or circuit board damage|
Contact manufacturer for repair
The switch button cannot be pressed or rebounded| Switch button damage|
Contact manufacturer for repair
UV light failure| Light bulb damage| Contact manufacturer for repair
Wire damage| Contact manufacturer for repair
Warranty Policy
The warranty for Jereh C-Create electrostatic disinfection sprayers is
implemented from the date of purchase. The warranty clauses are as follows.
Basic Statement
During the warranty period (calculated from the date of invoice), if the
product fails during normal use, Jereh provides warranty service. Please note
the following.
- The lost warranty card will not be reissued. Please keep it properly.
- The warranty card is only valid in China.
- Jereh does not provide on-site services for overseas customers (outside China mainland). For damages during the warranty period, Jereh will provide replacements for free; for damages caused by natural or human factors beyond the warranty period, Jereh will provide paid replacements and the freight and custom duty shall be borne by the customers.
Product Warranty
Item | Warranty Description | Warranty Period |
---|---|---|
Whole Unit | Whole Unit (Battery NOT included) | 12 Months |
Accessories | Battery, Charger, Power Cable | 6 Months |
Consumables | Filter Assembly | / |
Note: Warranty period is NOT applicable to consumables.
During the warranty period, the following situations are not covered by the
free warranty:
- Fail to present the corresponding purchase order or invoice;
- The information recorded on the warranty card is inconsistent with the actual product information or altered;
- The operation is not carried out in accordance with the manual and the items prohibited in the manual are violated;
- The products are maintained by staff not authorized by Jereh;
- The damage caused by natural disasters or force majeure;
- Self dismantling or man-made damage.
During the extended warranty period, the warranty period will not be extended or recalculated after the replacement of parts or major components. Jereh provides paid maintenance services to customers on the equipment with an expired warranty period.
Warranty Card
Product Model|
---|---
Product Name|
Product Number|
Purchase Date|
Invoice Number|
User Name|
Phone Number|
Address|
Date| Maintenance Record
---|---
|
After-sales service phone number (filled in upon the product sales)
Legal Statement
The materials and graphics in this manual are correct at the time of
publication, but the structure and performance of Jereh’s products are always
improving. The relevant contents in this manual may change. Please refer to
the actual products. Jereh has the right to upgrade the technology and modify
the product’s appearance.
Please read this manual carefully before using this product. Jereh will not be
responsible for any consequences caused by operation beyond the procedures of
safety, correct operation, repair, and maintenance of the equipment.
This manual is made by Jereh Group and the copyright is reserved. Without the
written permission of the publisher, no organization or individual is allowed
to plagiarize, copy or abridge any part of this manual in any way.
All rights reserved.
Packing List
Item | Description | Qty. |
---|---|---|
1 | Sprayer | 1 |
2 | Certificate of Conformity | 1 |
3 | User Guide | 1 |
4 | Filter Replacement&Nozzle Cleaning User Guide | 1 |
5 | Charger | 1 |
6 | Spray Nozzle | 1 |
7 | Spray Nozzle Seal | 2 |
8 | Spray Nozzle Assembly & Disassembly Tool | 1 |
9 | Filter Assembly | 5 |
EXCEED CUSTOMER EXPECTATIONS!
Jereh C-Create Technology Co., Ltd.
Address: No. 5 Jereh Road, Laishan District, Yantai
China 264003
Tel: +86-535-6766976
Fax: +86-535-6723172
Email: jerehhc@jereh.com
Web: www.jereh-hc.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>