TECH Sterowniki EH-01 Central Bay Installation Guide
- June 15, 2024
- TECH STEROWNIKI
Table of Contents
- TECH Sterowniki EH-01 Central Bay
- Product Information
- Product Usage Instructions
- Overview
- Description of control lights
- Installation
- Configuration-using an ethernet cable
- Configuration-via WiFi
- First step
- Recovery mode
- Cloud service
- Technical specification
- EU Declaration of Conformity
- Documents / Resources
TECH Sterowniki EH-01 Central Bay
Product Information
Specifications
- Power supply: 9-30V DC typ.24V DC
- Inputs: 2x USB2.0, Micro SD slot, 2x RS-485 (nr1 – SBUS; nr2 – Modbus), RJ-45 network interface, 4x RJ-12, DC 5.5/2.5mm socket
- Max. power consumption: 6W
- Operation temperature: N/A
- Acceptable ambient relative humidity: N/A
- Operation frequency: N/A
- Max. transmission power: N/A
- Transmission IEEE 802.11 b/g/n
Product Usage Instructions
Installation
- Connect the included power adapter to the power socket on the Sinum Central.
- The indicator light will signal a successful startup.
- Connect the Sinum Central to a network device (router, switch) using an Ethernet cable.
- Open a web browser* and go to the address https://search.sinum.tech.
- On this page, download the application for finding Sinum Central on Windows/iOS/Linux. This allows you to locate the Central without internet access. Alternatively, you can download the Sinum app on your phone to search for Sinum Central on the local network.
- Select the newly found Sinum Central from the device list and click “GO”.
Configuration – WiFi
- The active AccessPoint mode is indicated by the steady blinking of the WiFi connection indicator light.
- Enable WiFi network search on your phone or computer.
- Connect to the wireless network named “ap_sinum” or scan the QR code using the Sinum app.
First Steps
- After successful configuration, create an administrative account by providing a login and password.
- Login to the account and go to “Settings” to update the software to the latest version.
Recovery Mode
- The active Recovery mode is indicated by the flashing recovery mode indicator light.
- Open a web browser* and go to the address https://search.sinum.tech or download the software to change the system partition.
Cloud Service
- Activate your Cloud account by clicking on the link received in your email.
- Go to Sinum Central in the “Settings” tab > “Profile”. In the Cloud Account section, click “Connect”.
- Login to your Cloud account. You will then receive a request to add your Sinum Central to the Cloud.
Recommended browsers are Chrome/Firefox/Safari
Frequently Asked Questions (FAQ)
-
Q: What is the power supply requirement for the Sinum Central?
A: The Sinum Central requires a power supply of 9-30V DC type 24V DC. -
Q: How do I connect the Sinum Central to my network?
A: Connect the Sinum Central to a network device (router, switch) using an Ethernet cable. -
Q: How do I configure the WiFi on the Sinum Central?
A: Enable WiFi network search on your phone or computer and connect to the wireless network named “ap_sinum” or scan the QR code using the Sinum app. -
Q: How do I update the software on the Sinum Central?
A: Login to your administrative account, go to “Settings”, and update the software to the latest version. -
Q: How do I activate the Cloud service for my Sinum Central?
A: Activate your Cloud account by clicking on the link received in your email. Then, go to Sinum Central in the “Settings” tab > “Profile” and click “Connect” in the Cloud Account section. -
Q: What are the recommended browsers for using the Sinum Central?
A: The recommended browsers are Chrome, Firefox, and Safari.
Overview
- control lights
- Wifi antenna
- AC adapter input
- RJ-12 port
- RJ-45 port
- USB 2.0
- MicroSD card
Description of control lights
- power supply ON
- device operation
- active LAN connection
- active WiFi connection
- active access to the Cloud service
- normal device operation
- service error
- recovery mode – emergency operation
- internal memory operation
- memory card operation
Installation
- Connect the power supply included in the set to the power socket in the Sinum central device.
- Connect the Ethernet (network) cable and plug it into your home router.
- The control light will indicate the correct startup.
Configuration-using an ethernet cable
- Connect the Sinum Central with the ethernet cable to a network device (router, switch)
- Launch your web browser* and go to the website at https://search.sinum.tech. On this page, you need to download the Windows/iOS/Linux PBX search application, so you can find the SINUM central device without internet access. Alternatively, you can download the Sinum app on your phone to search for a Sinum central device in your local network.
- Select a new Sinum central device from the list of devices and click GO.
Configuration-via WiFi
- If there is no wired connection, to connect the Sinum Central device to the WiFi network, switch to the Access Point mode by removing the upper part of the casing (fig.1) and pressing the button on the back of the device once (fig.2).
- Active Access Point mode is indicated by the steady blinking of the WiFi connection control light.
- Activate WiFi network search on your phone or computer.
- Connect to the wireless network called „ap_sinum” or scan the QR code which, after confirmation, will connect you to the network.
- After connecting, a list of available WiFi networks will appear, which is downloaded once when the AccessPoint mode is started in the central device. To refresh the list of networks, restart the device in AccessPoint mode. Optionally, you can enter the address ”4.3.2.1” in your browser.
- Select the network, with which the Sinum Central device should connect.
- Switch your computer/phone to the same WiFi network to which your Sinum central device is connected.
- Launch your web browser* and go to https://search.sinum.tech. On this page, download the application for finding a SINUM central device for Windows/iOS/Linux, thanks to which you can find the device without access to the Internet. Alternatively, you can download the Sinum app on your phone to search for a Sinum central device in your local network.
- After finding your Sinum central device, click GO.
First step
- After correct configuration, create an administrate account by entering your login and password.
- Then log in to your account, go to Settings, and update the software to the latest version. The update can also be performed by connecting a Pendrive with the appropriate file to the USB port.
Recovery mode
- To start Recovery mode, remove the upper part of the casing (fig.1), press and hold the button on the back of the device (fig.2). Then, disconnect and reconnect the power supply by holding the button for 5 seconds.
- Active Recovery mode is indicated by the recovery mode control light which goes steady on.
- Launch your web browser* and go to https://search.sinum.tech or download the Sinum application on your phone to search for your Sinum central device.
- Connect to the Sinum central device called „sinum-r”.
- The Recovery mode allows, among other things, to restore the factory settings or return to the previous version of the software by changing the system partition.
Cloud service
- To use remote access to the Sinum central device and devices cooperating with it, you must register in the Cloud service at https://sinum.tech. Follow the instructions on the screen.
- Activate the Cloud account by clicking on the link sent to your e-mail.
- Go to the Sinum central device Settings > Profile. Find the Cloud account section and click Connect.
- Log in to your Cloud account. A message will be sent to you, asking you to add your Sinum central device to the Cloud. Create a name and optionally a description.
- To take full advantage of the device capabilities, log in by entering your Sinum central device address in the browser.
recommended browsers are Chrome/Firefox/Safari
Technical specification
Power supply | 9-30V DC typ.24V DC |
---|---|
Inputs | 2x USB2.0, Micro SD |
2x RS-485 (no.1 – SBUS; no.2 – Modbus) 1x RJ-45 Ethernet
4x RJ-12 RS Tech DC 5.5/2.5mm
Max. power consumption| 6W
Operation temperature| 5 ÷ 50°C
Acceptable ambient relative humidity| <80%REL.H
Operation frequency| 868MHz
Max. transmission power| 25 mW
Transmission IEEE 802.11 b/g/n|
Note
TECH Controllers is not responsible for any damages resulting from improper use of the system. The range depends on the conditions in which the device is used and the structure and materials used in the object construction. The manufacturer reserves the right to improve devices and update software and related documentation. The graphics are provided for illustration purposes only and may differ slightly from the actual look. The diagrams serve as examples. All changes are updated on an ongoing basis on the manufacturer’s website.
Before using the device for the first time, read the following regulations carefully. Not obeying these instructions may lead to personal injuries or controller damage. The device should be installed by a qualified person. It is not intended to be operated by children. It is a live electrical device. Make sure the device is disconnected from the mains before performing any activities involving the power supply (plugging cables, installing the device, etc.). The device is not water resistant.
The product may not be disposed of in household waste containers. The user is obliged to transfer their used equipment to a collection point where all electric and electronic components will be recycled.
EU Declaration of Conformity
Tech Sterowniki II Sp. z o.o. , ul. Biała Droga 34, Wieprz (34-122)
Hereby, we declare under our sole responsibility that the Central device EH-01
is compliant with Directive 2014/53/EU.
Wieprz, 10.10.2023
The full text of the EU Declaration of Conformity and the user manual are available after scanning the QR code or at www.tech- controllers.com/manuals.
TECH STEROWNIKI II Sp. z o.o.
ul. Biała Droga 31 34-122 Wieprz
Service
- PL
- tel: +48 33 875 93 80
- serwis.sinum@techsterowniki.pl
- EN
- tel: +48 33 875 93 80
- support.sinum@techsterowniki.pl
- www.tech-controllers.com
- CZ
- tel: +420 733 180 378
- cs.servis@tech-reg.com
- www.tech-controllers.cz
- SK
- tel: +421 918 943 556
- sk.servis@tech-reg.com
- www.tech-reg.sk
- DE
- tel. +48 33 875 93 80
- support.sinum@techsterowniki.pl
- www.tech-controllers.com
- NL
- tel. +31 341 371 030
- info@eplucon.nl
- www.tech-controllers.com
- RO
- tel. +40 785 467 825
- contact@tech-controllers.ro
- www.techsterowniki.pl/ro
- HU
- tel. +36-300 919 818, +36 30 321 70 88
- szerviz@tech-controllers.com
- www.tech-controllers.hu
- ES
- tel: +48 33 875 93 80
- support.sinum@techsterowniki.pl
- www.tech-controllers.com
- UA
- tel. +38 096 875 93 80
- servis.ua@tech-controllers.com
- www.tech-controllers.com
- RU
- tel. +375 3333 000 38
- (WhatsАpp, Viber, Telegram)
- service.eac@tech-reg.com (RU)
Wyprodukowano w Polsce
www.tech-controllers.com/manuals
Made in Poland
Documents / Resources
| TECH
Sterowniki EH-01 Central
Bay
[pdf] Installation Guide
EH-01 Central Bay, EH-01, Central Bay, Bay
---|---
References
- controllers.com
- Intelligens fűtés-hűtés, fűtési-hűtési megoldások - TECH vezérlők gyártója | TECH vezérlők
- Intelligent heating, smart heating solutions - manufacturer of controllers | TECH Controllers
- Manuals - TECH Controllers
- TECH Controllers - Teplo ve Vašem domě
- TECH Controllers - Teplo vo Vašom dome
- Sinum Find
- Sinum Cloud