Revolv E7 Series Electric Furnace Instruction Manual

Revolv E7 Series Electric Furnace

Technical Specifications

E7 Series Electric Furnaces

The E7 Series furnace is designed for all sizes of manufactured and modular homes. These units incorporate reliability and low maintenance. Units may be installed free standing in a utility room or enclosed in an alcove or closet. E7 Series furnaces are A/C ready, with 16 blower speeds to meet any cooling requirement.

Features and Benefits

• E7ED Downflow Electric Furnace
• E7EU Upflow Electric Furnace
• E7EM Multiposition Electric Furnace

Model Identification

• E: Product Type E – Electric Furnace
• 7: Seventh Series
• E: Constant Torque 16 Speed ECM Blower
• M: Multiposition
• D: Downflow
• U: Upflow

Primary Capacity:

• 010 – 10 kw
• 012 – 12 kw
• 015 – 15 kw
• 017 – 17 kw
• 020 – 20 kw
• 023 – 23 kw

Unit Specifications

Furnace Models| Rated Heating Output, Btuh (see note 1)| Watts (Total kw, Heating Elements & Blower)| Supply Voltage| Heating Elements, No. (Total kw)| Motor Speed, H.P. Rating, Amps| Test ESP, in. w.c.| Optional Cooling| Optional Heat Pump| Air Filter (Standard)
---|---|---|---|---|---|---|---|---|---
010H| 35,000| 10.4| 240 Volts/60Hz/1-Phase| 2 (10.0)| 16 Speed, 1/2 HP, 3.6 A| 0.3| 2.0 – 4.0 Ton| 2.0 – 4.0 Ton| 18 x 20 x 1 (nominal)
012H| 41,000| 12.0| 240 Volts/60Hz/1-Phase| 2 (11.6)| 16 Speed, 1/2 HP, 3.6 A| 0.3| 2.0 – 4.0 Ton| 2.0 – 4.0 Ton| 18 x 20 x 1 (nominal)
015H| 53,000| 15.4| 240 Volts/60Hz/1-Phase| 3 (15.0)| 16 Speed, 1/2 HP, 3.6 A| 0.3| 2.0 – 4.0 Ton| 2.0 – 4.0 Ton| 18 x 20 x 1 (nominal)
017H| 57,000| 16.6| 240 Volts/60Hz/1-Phase| 3 (16.2)| 16 Speed, 1/2 HP, 3.6 A| 0.3| 2.0 – 4.0 Ton| 2.0 – 4.0 Ton| 18 x 20 x 1 (nominal)
020H| 70,000| 20.4| 240 Volts/60Hz/1-Phase| 4 (20.0)| 16 Speed, 1/2 HP, 3.6 A| 0.3| 2.0 – 4.0 Ton| 2.0 – 4.0 Ton| 18 x 20 x 1 (nominal)
023H| 75,000| 22.0| 240 Volts/60Hz/1-Phase| 4 (21.6)| 16 Speed, 1/2 HP, 3.6 A| 0.3| 2.0 – 4.0 Ton| 2.0 – 4.0 Ton| 18 x 20 x 1 (nominal)

Furnace Dimensions

• Multi-Poise Width-20 (508mm), Height-29 (737mm), Depth-24 1/2 (623mm)
• Upflow/ Width-20 (508mm), Height-60 5/8 (1546mm), Depth-24 1/2 Downflow (623mm)

Electrical Specifications

Model Number| Supply Total Circuit Amperes| Maximum Over-current Rating| Minimum Circuit Ampacity
---|---|---|---
E7E010H1 012H1| Single: 45.3| 60| 57
E7E015H1| Dual A: 27.8
Dual B: 24.2| Dual A: 35
Dual B: 35| Dual A: 35
Dual B: 30
E7E017H1| Single: 71.1| 90| 83
E7E020H1| Dual A: 45.3
Dual B: 20.8| Dual A: 60
Dual B: 30| Dual A: 60
Dual B: 26.1
E7E*023H1| Single: 93.6| 110| 109

Anticipator Settings

Clearances

| Closet| Alcove
---|---|---
Front| 6| 18
Back| 0| 0
Sides| 0| 0
Top| 0| 0
Top and Sides of Duct| 0| 0
Bottom of Duct| 0| 0

TECHNICAL SPECIFICATIONS

E7 Series Electric Furnaces
The E7 Series furnace is designed for all sizes of manufactured and modular homes. These units incorporate reliability and low maintenance. Units may be installed free standing in a utility room or enclosed in an alcove or closet. E7 Series furnaces are A/C ready, with 16 blower speeds to meet any cooling requirement.

FEATURES and BENEFITS

• Choice of Air Conditioning Options: From 1.5 to 5 tons A/C ready.
• Easy Open Door: Secures the door firmly for transit, yet allows easy removal for access.
• Effective Air Filter: Universal disposable filter is readily available and simple to replace.
• Nichrome Heating Elements: Provide long lasting, efficient heating.
• Appliance Quality Door: Protects against rust and other corrosion. Baked enamel finish allows for easy cleaning.
• Fully Insulated Furnace Cabinet: Insures minimized heat loss and quiet operation.
• Safety and Dependability: Auto reset controls protect unit’s electrical circuitry and helps ensure trouble free performance. Built in circuit breakers for extra safety.
• Adaptable: Unit can be adapted to provide dependable heating in either downflow or upflow mode.
• Versatile: Works with self-contained or split system air conditioners or heat pumps.
• Heating Relays: Provide quiet operation.
• Control Board: Allows for 16 blower speeds to create ideal comfort in the home.
• 7 Segment LED Display: Shows furnace mode and simplifies service.
• Multiposition Furnace (E7EM): Available to meet any application.
• Upflow (E7EU) and Downflow (E7ED) Furnace: Comes with a factory installed coil box and all necessary filters.
• Full line of accessories to meet many difficult applications.

MODEL IDENTIFICATION

Furnace Parts Identification

UNIT SPECIFICATIONS

FURNACE MODELS E7-| 010H| 012H| 015H| 017H| 020H| 023H
---|---|---|---|---|---|---
Rated Heating Output, Btuh (see note 1)| 35,000| 41,000| 53,000| 57,000| 70,000| 75,000
Watts (Total kw, Heating Elements & Blower)| 10.4| 12.0| 15.4| 16.6| 20.4| 22.0
Supply Voltage| 240 Volts/60Hz/1-Phase
Heating Elements, No. (Total kw)| 2 (10.0)| 2 (11.6)| 3 (15.0)| 3 (16.2)| 4 (20.0)| 4 (21.6)
Motor Speed, H.P. Rating, Amps| 16 Speed, 1/2 HP, 3.6 A
Test ESP, in. w.c. Max| 0.3
Optional Cooling Available with factory installed blower| 2.0 – 4.0 Ton
Optional Heat Pump Available with factory installed blower| 2.0 – 4.0 Ton
Air Filter (Standard)| 18″ x 20″ x 1″ (nominal)

Furnace Dimensions

| Multi-Poise| Width-20″ (508mm), Height-29″ (737mm), Depth-24 1/2″ (623mm)
Upflow/ Downflow| Width-20” (508mm), Height-60 5/8” (1546mm), Depth-24 1/2” (623mm)

1. Heating output rated at listed voltage. For outputs at voltages other than 240V, multiply Btuh rating by the following factors: x 0.92 (230V), x 0.84 (220V), x 0.75 (208V)

ELECTRICAL SPECIFICATIONS

*MODEL NUMBER E7E-| **

SUPPLY CIRCUIT

| ****

TOTAL AMPERES

| MAXIMUM OVER- CURRENT RATING| MINIMUM CIRCUIT AMPACITY
---|---|---|---|---
010H1| Single| 45.3| 60| 57

012H1

| Single| 51.6| 70| 65
Dual “A”| 27.8| 35| 35
Dual “B”| 24.2| 35| 30

015H1

| Single| 66.1| 90| 83
Dual “A”| 45.3| 60| 57
Dual “B”| 20.8| 30| 26

017H1

| Single| 71.1| 90| 89
Dual “A”| 45.0| 60| 56
Dual “B”| 26.1| 35| 33

020H1

| Single| 86.9| 110| 109
Dual “A”| 45.3| 60| 57
Dual “B”| 41.7| 60| 52

023H1

| Single| 93.6| 125| 117
Dual “A”| 45.3| 60| 57
Dual “B”| 48.0| 60| 60

NOTE: Wire size must be in accordance to the applicable revision of the NEC and all other applicable codes

Anticipator Settings

Clearances

• Service Clearance
• For upflow application using upflow stand, 1″ minimum per side.

Optional Accessories

Airflow Data

AIRFLOW (CFM)

MODEL NUMBER

| MOTOR SWITCH SETTINGS (0=OFF, 1=ON)| EXTERNAL STATIC PRESSURE (IN. W.C.)
0.1| 0.2| 0.3| 0.4| 0.5| 0.6
1/5| 2/6| 3/7| 4/8| CFM| CFM| CFM| CFM| CFM| CFM

E7E*-0**H1

| 0| 0| 0| 0| 685| 640| 606| 560| 513| 460
1| 0| 0| 0| 770| 727| 692| 648| 599| 552
0| 1| 0| 0| 854| 815| 779| 737| 685| 645
1| 1| 0| 0| 939| 902| 865| 825| 771| 737
0| 0| 1| 0| 1,012| 974| 938| 899| 850| 813
1| 0| 1| 0| 1,084| 1,047| 1,011| 973| 930| 888
0| 1| 1| 0| 1,157| 1,119| 1,084| 1,047| 1,009| 964
1| 1| 1| 0| 1,197| 1,166| 1,130| 1,093| 1,056| 1,017
0| 0| 0| 1| 1,245| 1,215| 1,178| 1,143| 1,105| 1,066
1| 0| 0| 1| 1,293| 1,263| 1,225| 1,192| 1,154| 1,114
0| 1| 0| 1| 1,344| 1,312| 1,278| 1,242| 1,206| 1,169
1| 1| 0| 1| 1,394| 1,361| 1,330| 1,291| 1,257| 1,223
0| 0| 1| 1| 1,434| 1,401| 1,369| 1,332| 1,299| 1,267
1| 0| 1| 1| 1,473| 1,441| 1,408| 1,373| 1,340| 1,311
0| 1| 1| 1| 1,514| 1,483| 1,451| 1,417| 1,386| 1,355
1| 1| 1| 1| 1,555| 1,525| 1,494| 1,460| 1,431| 1,398

NOTES:

1. Motor switch settings for heating speeds use HEAT switches 1, 2, 3, and For cooling speeds use COOL switches 5, 6, 7, and 8.
2. Data is shown with filter

*E7E- 0H1

| MAXIMUM HEATING AIRFLOW SETTING
---|---
E7EM| E7ED| E7EU
DOWNFLOW| UPFLOW| DOWNFLOW| UPFLOW
MH| RES| MH| RES| MH| RES| MH| RES
10|

0001

| 0101| 0001|

0101

|

0101

|

0101

|

0101

|

0101

12| 0011|

0101

15|

0101

17
20
23| 0011| 0001| 0011| 0001| 0011

NOTES:

1. MH and Res represent Manufactured Housing and Residential (modular home) applications, respectively
2. To comply with government mandated efficiency standards, speed settings with higher CFM values than listed in this table are not allowed in HEAT mode

Maximum Allowable Heat Settings

ACCESSORIES

ACCESSORY KITS

GENERAL TERMS OF LIMITED WARRANTY

For complete details of the Limited Warranty, including applicable terms and conditions, see your local installer or contact the Nortek Global HVAC, LLC warranty department for a copy.

Before purchasing this appliance, read important energy cost and efficiency information available from your retailer. Specifications and illustrations subject to change without notice and without incurring obligations. Printed in U.S.A (07/2019)

References

• TCPDF

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>