TheraGun Pro 4th Gen Handheld Deep Tissue Massage Gun User Guide
- June 15, 2024
- THERAGUN
Table of Contents
TheraGun Pro 4th Gen Handheld Deep Tissue Massage Gun
Product Information
Specifications
- Lithium-ion battery
- Rotating arm with 4 positions
- OLED screen
Product Usage Instructions
Turning On and Off the PRO
- Insert the lithium-ion battery fully before turning on the PRO.
- To turn on the PRO, firmly press and hold the center button for 2 seconds on the button pad.
- To turn off the PRO, firmly press and hold the center button on the button pad until the device shuts down.
Adjusting Speed and Treatment Presets
- Press the plus (+) and minus (-) buttons on the button pad to increase or decrease speed.
- Press the left (<) arrows on the button pad to toggle between the PRO’s pre-loaded treatment presets.
FAQ
How long does it take to fully charge the PRO?
The PRO is fully charged when the OLED screen shows 100% and the battery
icon is full.
Can I use attachments at different angles?
No, do not use the device at an angle that puts the percussive arm of the
device in contact with the skin.
How many positions can I adjust the rotating arm to?
The rotating arm can be adjusted to 4 positions.
How To Guide
Using the PRO
- Insert the lithium-ion battery fully before turning on the PRO.
- To turn on the PRO, firmly press and hold the center button for 2 seconds on the button pad.
- Press the plus (+) and minus (-) buttons on the button pad to increase or decrease speed.
- Press the left (<) and right (>) arrows on the button pad to toggle between the PRO’s pre-loaded treatment presets.
- The PRO should be used with the attachment making perpendicular contact with the skin. Only the attachment of the device should make contact with the skin or area you are treating.
- Do not use the device at an angle that puts the percussive arm of the device in contact with the skin.
- To turn off the PRO, firmly press and hold the center button on the button pad until the device shuts down.
Connecting the Attachments
Align the attachment with the tip of the rotating arm and push to connect. To
remove, grip the attachment, placing 1 finger on each side of the plastic
connector. Pull off the attachment.
Using the Rotating Arm
The PRO’s rotating arm adjusts to 4 positions. To adjust the arm, push the
rotating arm button on the underside of the PRO and move the arm to the
desired position.
Battery and Charging
Inserting and Removing PRO’s Lithium-ion Batteries
- Align and insert the battery in the battery slot on the underside of the Theragun PRO with the flat side of the battery end facing the circular release button.
- Battery life is displayed on the PRO’s OLED screen when the device is turned on.
- The PRO is fully charged when the OLED screen shows 100% and the battery icon is full.
- To remove the battery, press the circular release button above the battery slot and pull the battery out.
Charging
- Plug the charging wire into the port on the charging dock.
- Insert the battery into the charging dock and press down until the light flashes.
- Charging is complete once the light stops flashing.