Ofuzzi Cyber 1000 Cordless Robotic Pool Cleaner User Manual
- June 15, 2024
- Ofuzzi
Table of Contents
Cyber 1000 Cordless Robotic Pool Cleaner
Specifications
- Name: Cyber 1000
- Model: Cordless Robotic Pool Cleaner
- Rated input voltage/frequency of charger: [insert voltage/frequency]
- Rated output voltage of charger: [insert voltage]
- Rated output current of charger: [insert current]
- Working power: [insert power]
- Working time: [insert time]
- Battery capacity: [insert capacity]
- Charging time: [insert time]
- Max. cleaning surface: [insert surface area]
- Filter capacity: [insert capacity]
- Filter capability: [insert capability]
- Swimming pool slope: [insert slope]
- Pool water temperature: [insert temperature]
- Moving speed: [insert speed]
- IP Grade: [insert grade]
- Charging environment temperature: [insert temperature]
- Max. water depth: [insert depth]
- Storage condition: [insert condition]
Operation Instruction
Precautions
- Install the brush before use to avoid possible dirt leaks.
- Please ensure that the top cover of the cleaner is tightly assembled to its chassis. Install the swing plate by inserting it into the base.
- After turning on, the cleaner must be placed in the pool within 20 seconds.
- Put into or lift out of the pool with the cleaner bottom towards the wall to avoid any possible scratches to the pool.
FAQ
- Q: Can the cleaner be used in pools with slopes?
- A: No, the cleaner is only suitable for flat-bottom pools and cannot handle slopes greater than 15 degrees.
- Q: Can children use the cleaner?
- A: The cleaner should not be used by children under the age of 8 or people with mental disorders. If using it under supervision, make sure to take necessary precautions to prevent any damage.
- Q: How often should the cleaner be charged if stored for a long time?
- A: The cleaner should be charged every three months if it needs to be stored for a long time. Use the original and authorized adapter to ensure proper charging.
Important Precautions
- Do not power on the cleaner when it is out of the water.
- Strictly prohibit using the cleaner beyond its operating conditions. Please read the manual carefully, and use it according to the manual. We have no responsibility for any loss or injury caused by improper use.
- Use the accessories recommended or sold by the manufacturer only.
- This model mainly applies to swimming pools with a flat floor.
- The cleaner should not be used by children under the age of 8 or people with mental disorders. Please do so under the supervision of the guardian if necessary. Please do not allow children to ride on it or play as a toy.
- Use the original and authorized power adapter only.
- It must be replaced by the after-sale professionals if the power line is damaged.
- The power line must be connected to a leakage-protected and earthed socket when charging.
- Do not operate the cleaner when there are people in the pool.
- Always clean and wash the filter tray after use.
- Power off the cleaner when maintaining, cleaning, or not using it.
- The cleaner should be stored in a cool and ventilated place, away from direct sunshine.
- Charge the battery under the permitted conditions. The cleaner should be stored in a cool place when charging, meanwhile do not place or covered with anything to prevent the damage of internal electrical components caused by overheating of the power unit.
- Only professionals can disassemble the sealed driving kit of the cleaner.
- Close the pool filtration system before use.
- The cleaner should be charged every three months if it needs to be stored for a long time. Please use the original and authorized adapter only to ensure that the battery power is maintained at 40%-60%. The battery voltage will be lower than the over-discharge protection voltage due to the self-discharge of the battery if not charging the battery for a long time, which will lead to fatal damage to the battery if continuing too long. Please be careful.
- Prohibit charging the battery under the condition of fire or extreme heat. Do not use or store the cleaner near the heat source.
- Prohibit piercing the cleaner shell with nails or other sharp objects, and prohibit hammering, impacting, and throwing the cleaner.
Ideal for Residential Flat Bottom Pools
Please note that it’s not an all-rounder
For all above / half above-ground pools
For Inground Pools of Flat Bottom
(Water Depth < 6.56ft)
Warm Tips : Only suitable for flat-bottom pools, not climbing walls or slopes more than 15 degrees.
Not for deep shallow ends, Can’t climb walls or stairs
Introduction
The robotic pool cleaner Cyber 1000 is a new type of rechargeable automatic cleaning equipment for pools with the function of automatic parking.
Please read this manual carefully before use.
Appearance & structure
Specifications
1. | Name | Cordless Robotic Pool Cleaner |
---|---|---|
2. | Model | Cyber 1000 |
3. | Rated input voltage/ frequency of charger | 100Vac- 240Vac |
4. | Rated output voltage of charger | 12.6 V |
5. | Rated output current of charger | 3A |
6 . | Working power | Appr. 50W |
7. | Working t ime | max. 95min for one cycle |
8. | Battery capacity | 5200mAh |
9. | Charging t ime | 2.5-3h |
10. | Max. cleaning surface | Appr. 908ft² or 84m² |
11. | Filter capacity | Appr. 2641us gal or 10m³/ h |
12. | Filter capability | 180μm |
13. | Swimming pool slope | max. 15° |
14. | Pool water temperature | (50°F) – (95°F) /10℃-35℃ |
15. | Moving speed | Appr. 52.4ft or 16 m/min |
16 . | IP Grade | IPX8 (main body) |
17. | Charging environment temperature | (32°F) – (113°F) /0℃- 45℃ |
18. | Max. water depth | 6 .56 ft or 2.0m |
19. | Storage condition | |
Short term (less than 1 month): (-4°F) – (+140°F) / (-20℃)-(+60℃) ≤ |
75%RH
Medium term (less than 3 months): (-4°F) – (+113°F) / (-20℃)-(+45℃) ≤ 75%RH
Long term (more than 3 months): (-4°F) – (+68°F) / (-20℃)-(+20℃) ≤ 75%RH
Operation instruction
Precautions
- Install the brush before use to avoid possible dirt leaks.
- Please ensure that the top cover of the cleaner is tightly assembled to its chassis. Install the swing plate, The swing plate can be installed by inserting it into the base
- After turning on, the cleaner must be placed in the pool within 20 seconds
- Put into or lift out of the pool with the cleaner bottom towards the wall to avoid any possible scratches to the pool.
- The suction adapter is removable.
- Power off the cleaner after use.
- Do not touch the wall to avoid scratching the wall or damaging the cleaner when putting into or lifting out of the pool.
- It is necessary to stay on the water surface for 10-15 seconds until water flows out from the cleaner to the pool before being placed on the ground
- When the floating handle is far away form the poolside, use the hook(pole is not included) to reach the floating handle.
Quick operation
- Plug in the cleaner with the supplied adapter and charging line to charge the battery.
Turn the switch knob to OFF before charging.
Clean the charging port before charging.
Keep the machine charging port and the adapter dry when charging.Adapter indicator| Status
---|---
Red| Battery is charging
Green| Charging is finished - Turn the switch knob to power on or off the cleaner
- Please put it into water within 20 seconds after turning it on.
- Turn the switch knob to ON, the cleaner is power-on and the indicator light is steady blue, then put it into water. About 15 seconds after powering on, the cleaner begins to work, and the blue light flashes.
- When battery power is low, the cleaner will move close to the pool wall. The indicator light is steady blue for about 2 minutes and then flashes three times before the cleaner completely stops.
- Indicators
Status| Meaning
---|---
Solid blue| Switch on
Blue light slow flashing| The cleaner is working in the pool
Blue light fast flashing| Cleaner is low battery or malfunction in the pool
Functions and adjustment of nozzles
There are two nozzles on the cleaner, one of them opens once the other closes. Water flows out through the open nozzle to thrust the cleaner forward. Adjust the nozzle by turning it to control the cleaner route.
Setting nozzle angle and cleaner route
The nozzles of the cleaner are marked with angles (0°-40°). The cleaner moves in an approximately straight line when the nozzle angle is 0°. The cleaner moves in a more curved line at a larger angle from 0°-40°.
- Setting 1: default setting: 0°-20°, for most of the pools.
- Setting 2 : 0°-40°, when setting 1 does not manage a full coverage of the pool.
- Setting 3: 20°-20°, for round pools.
Note : These are the recommended settings. Different settings may work better for your pool.
Clean the filter tray
- Open the cleaner with the clips
- Take out the filter tray
- Clean the filter tray and chassis
- Reassemble the cleaner
- Clap on the clips
Installation and removal of swing plate
The swing plate can be removed by poking the base buckle outwards and
installed by inserting it into the base.
Troubleshooting
Symptom
| ****
Possible reason
| ****
Solution
---|---|---
The cleaner does not work and the indicator
light slowly flashes.
| Low remaining battery capacity| Charge the battery
The cleaner does not work and the indicator
light rapidly flashes.
| ****
Internal fault
| ****
Contact after- sale service
The cleaner does not work and the indicator light does not work.| Battery protection| Charge the battery and power on the cleaner to watch whether
the indicator light is on. If not, contact after-sale service.
The adapter indicator light does not work.
| ****
Adapter damage
| ****
Contact after- sale service
The cleaner does not have a full coverage of pool.
| ****
Unsuitable nozzle angle
| ****
Adjust nozzle angle
Special pool shape
| Adjust nozzle to increase angle of deflection
Pool water filtration system is open.| Turn off water filtration system
The working t ime of the cleaner cannot reach 95 min| ****
Not fully charged
| Fully charge the cleaner (needs to last 2.5-3 hours)
The cleaner cannot reach the shallow water area from the deep water area|
The pool slopes more than 15 degree.
| Warm Tips:Only suitable for flat-bottom pools, not
climbing walls or slopes more than 15 degree.
Thank you for purchasing Ofuzzi Cordless Robot ic Pool Cleaner. If you have any quest ions or issues, please contact us for customer service.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>