REMS 175400R4 HD CamScope Instruction Manual
- June 15, 2024
- REMS
Table of Contents
REMS 175400R4 HD CamScope
Product Information
Specifications :
- Product Name: REMS CamScope HD
- Model Number: Art.-Nr. 175400 R4
- Storage Capacity: 32 GB
- USB Ports: USB C, USB A, USB 3.0
Product Usage Instructions
Unboxing and Setup:
- Open the package and take out the REMS CamScope HD Set.
- Ensure that all the components are present as mentioned in the delivery format.
- Connect the USB C or USB A cable to the corresponding port on the device.
- If using USB 3.0, connect the USB 3.0 cable to the appropriate port.
- Insert the included 32 GB storage card into the device.
- Power on the device by pressing and holding the ON/OFF button for 2 seconds.
- The device will start up and display the REMS CamScope HD interface.
Using REMS CamScope HD:
The REMS CamScope HD is a professional tool for inspections and recordings. Follow these steps to use it:
- Position the camera lens at the desired inspection area.
- Adjust the focus using the controls provided on the device.
- To capture images, press the shutter button on the device.
- To record videos, press and hold the record button until the recording starts. Repeat the same to stop recording.
- Use the USB ports to transfer the captured images and videos to a computer or other devices for further analysis.
- To power off the device, press and hold the ON/OFF button for 2 seconds.
FAQ:
-
Q: What is the storage capacity of REMS CamScope HD?
A: The REMS CamScope HD comes with a 32 GB storage card. -
Q: Can I connect REMS CamScope HD to a computer?
A: Yes, you can connect the device to a computer using the USB ports provided. -
Q: How do I capture images with REMS CamScope HD?
A: To capture images, simply press the shutter button on the device while positioning the camera lens at the desired inspection area. -
Q: How do I record videos with REMS CamScope HD?
A: To record videos, press and hold the record button until the recording starts. Repeat the same to stop recording.
Art.-Nr. 175400 R4
Betriebsanleitung REMS CamScope HD beachten!
Siehe auch www.rems.de → Downloads → Betriebsanleitungen
→ REMS CamScope HD
Art.-Nr. 175400 R4
BATTERY
INSTALLATION
BUTTON FUNCTION
CONNECTION
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>