TARGA TKD-SBES LED Cashier Addon Display Sign Installation Guide
- June 15, 2024
- TARGA
Table of Contents
TARGA TKD-SBES LED Cashier Addon Display Sign
Product Information
Specifications
- Dimension (Quantity): 142x40x14.5mm
- Power/Amperage: 1.5W/62mA
- Weight: 260.3g
- Material: Aluminum
- Cable: PMMA AWM Style 20276/4m
- Plug: RJ10 4P4C
- Input: 24V PS2 according to EN 62368-1
FAQ
- Q: How should I clean the acrylic glass surface?
- A: The acrylic glass surface should be cleaned with a damp microfiber cloth. Wipe vertically and then horizontally, allowing residual moisture to dry off without rubbing.
- Q: What is the input power and amperage of the display sign?
- A: The display sign has an input power of 1.5W and an amperage of 62mA.
- Q: What type of plug does the display sign have?
- A: The display sign is equipped with an RJ10 4P4C plug.
- Q: Can I use the display sign with any cash register?
- A: The display sign is compatible with cash registers that provide a 24V PS2 input according to EN 62368-1.
Description
The Targa LED Cashier Addon Display Sign is a product designed to be installed as an additional display for cash registers. It features a profile display that accepts input of 24V PS2 according to EN 62368-1. The display is made of aluminum material and has dimensions of 142x40x14.5mm. The product comes with a PMMA AWM Style 20276/4m cable and weighs 260.3g. It is equipped with an RJ10 4P4C plug.
What In The Box
Tools
**Credits/Refererence:***
- Image: Flaticon.com´.
- This cover was created using resources from Flaticon.com.
Installation Instructions
Optional: Cleaning Acryl – Glas
General Handling Instruction
General Handling Instruction Acryl Glas
- Acrylic glass should never be wiped dry. This may cause scratches on the surface. Also, the acrylic – sheet becomes electrostatically charged and attracts dust.
- The microfiber cloth should be free of any dirt.
- However, the surface should always be cleaned with a damp microfiber cloth.
- First wipe vertically, then horizontally. No circular movements
- Allow residual moisture to dry off to form an antistatic film. Do not rub!
Technical Specification
| Description | Dimension /(Quantity) | Material | Weight [g] |
|---|---|---|---|
| Profile | 142x40x14,5mm | Aluminum | 260,3 |
| Display | 272x125x8mm | PMMA | 325,0 |
| Input | Power/ Amperage | Cable | Plug |
24V ⎓
PS2 according to EN 62368-1
| ≤ 1,5W/62mA| AWM Style 20276/4m| RJ10 4P4C
Plug
Description: 24V LED connector (RJ10 4P4C)
Pin Signal 4m cable wire color
- 1 LED_B blue and white
- 2 LED_R blue
- 3 LED_G orange-white
- 4 24 orange
Dimension
Cash register sign
Product marking
FCC STATEMENT
Attachment FCC HINTS
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
Declaration Of Conformity
EU-declaration of conformity
Declaration of Conformity
i- this document online
Documents / Resources
|
TARGA TKD-SBES LED Cashier Addon Display
Sign
[pdf] Installation Guide
2BC5E-TKD-SBES, 2BC5ETKDSBES, TKD-SBES, TKD-SBES LED Cashier Addon Display
Sign, LED Cashier Addon Display Sign, Cashier Addon Display Sign, Addon
Display Sign, Display Sign, Sign
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>