Targa GmbH TKD-SBES-MD-IGB Targa LED Cashier Main Display Sign Installation Guide

Targa GmbH TKD-SBES-MD-IGB Targa LED Cashier Main Display Sign

Product Information

The Targa LED Cashier Main Display Sign is a high-quality display sign designed for cashier counters. It provides clear and bright visuals to attract customers and display important information. The display sign is made of aluminum and PMMA material, ensuring durability and a sleek appearance. With a dimension of 272x250x8mm, it fits perfectly on cashier counters without taking up too much space. The display sign operates on 24V input and consumes 1.5W/62mA or 2.0W/82mA of power. It comes with a 4m cable for easy installation.

Specifications

i this document online

Installation Guide: Targa LED Cashier Main Display Sign

TARGA TKD-SBES-MD-SET-R012 TARGÀ
TKD-SBES-MD-SET-L012 LED CASHIER MAIN DISPLAY SIGN with attachment right, PRINT 12 LED CASHIER MAIN DISPLAY SIGN with attachment left, PRINT 12

Credits/Refererence:   Image: This cover was created using resources from Flaticon.com.

Credits/Refererence :* Image: Flaticon.com´. This cover was created using resources from Flaticon.com.

1. Credits/Refererence:* Image: Flaticon.com´. This cover was created using resources from Flaticon.com.
2. 
3. 
4. 
5. 
6. 

Acrylic glass should never be wiped dry. This may cause scratches on the surface. Also, the acrylic – sheet becomes electrostatically charged and attracts dust.

• The microfiber cloth should be free of any dirt.
• However, the surface should always be cleaned with a damp microfiber cloth.
• First wipe vertically, then horizontally. No circular movements
• Allow residual moisture to dry off to form an antistatic film. Do not rub!

Technical Specification

≤ 2,0W/82mA

| AWM Style 20276/4m| RJ 10 4P4C

Cash register sign

Product marking

TKD-SBES-MD-APC Input: 24V – III This device complies with Part 15 of the FCC Rules.

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

TARGA GmbH Coesterweg 45 59494 Soest GERMANY

EU-declaration of conformity

• Nummer: Number: Name des Ausstellers:
• Issuer’s name: Anschrift des
• Ausstellers : Issuer’s address: Gegenstand der
• Erklarung : Object of the declaration: 2010SBG-LAM_LED Targa GmbH Coesterweg 45, 58494 Soest,
• Germany LED Kassendisplay / LED Display for cash register TKD-SBES-MD-APC TKD-SBES-AOD-APC

The object of the declaration described above is in conformity with the relevant Union harmonisation legislation

Declaration of conformity

Number: Issuer’s name: Issuer’s address: 2010SBG-LAM_LED Targa GmbH Coesterweg 45, 59494 Soest, Germany Object of the declaration: LED Display for cash register TKD-SBES-MD-APC TKD-SBES-AOD-APC The object of the declaration described above is in conformity with the relevant Union harmonization legislation:

Attachment FCC HINTS

FCC hints

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions

1. This device may not cause harmful interference, and
2.  This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
• These limits are designed to provide reasonable protection against harmful interference in a residential installation.
• This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

Attachment

References

• Vector Icons and Stickers - PNG, SVG, EPS, PSD and CSS

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>