ELECTRONICS TECHNOLOGY 433-2 RGBW Controller Instructions
- June 15, 2024
- ELECTRONICS TECHNOLOGY
Table of Contents
ELECTRONICS TECHNOLOGY 433-2 RGBW Controller
Product Information
The product is a Christmas light controller with various lighting modes and color options. It operates on a timer and can be controlled using touch buttons.
Specifications
- Lighting Modes: Sync Jump, Sync Slow Flash, Colorful Slow Flash, Colorful Jump, Monochrome Flash/Two-color Flash, Two-color Twinkle, Three-color Twinkle, Colorful, Colorful Twinkle, RGB Random
- Timer Settings: Touch-1 (Blue): Brighting 2H, Dormant 22H; Touch-2 (Red): Brighting 4H, Dormant 20H; Touch-3 (Green): Brighting 6H, Dormant 18H; Touch-4 (White): Brighting 8H, Dormant 16H
- Speed: 4 Speed Levels
- Demonstration: Automatically demonstrates seven modes in the blue area
- Color Options: RGBW, RGB Color, Seven Colored Waves, RGB+W
- Reuse Building: Some modes can be reused for building lighting effects
Product Usage Instructions
Turning On and Off
- To turn on the Christmas lights and timer, press the ON button.
- To turn them off, press the OFF button.
Setting Timer
There are four touch buttons (Touch-1 to Touch-4) that control the timer
settings. Each button has a specific color and brightness duration. Choose the
desired button and press it to set the timer accordingly.
Selecting Lighting Modes
To select a specific lighting mode, use the corresponding touch button. The
available modes include Sync Jump, Sync Slow Flash, Colorful Slow Flash,
Colorful Jump, Monochrome Flash/Two-color Flash, Two-color Twinkle, Three-
color Twinkle, Colorful, Colorful Twinkle, RGB Random, and Seven Colored
Waves.
Changing Speed
The product offers four speed levels for the lighting effects.
Use the speed control buttons to adjust the speed according to your
preference.
Reuse Building Lighting Effects
Some modes can be reused for building lighting effects. These modes are
indicated as “Reuse building” in the instructions. Follow the same steps
mentioned above to activate these modes.
FAQ
What is the range of the RF controller?
The RF controller has a general range and can be used in portable exposure
conditions without restriction.
Can I modify the device or make any changes to it?
No, any changes or modifications not approved by the responsible party for
compliance could void the user’s authority to operate the equipment.
OVERVIEW
TIME：
- Touch-1: Controller lndicator Light Blue Brighting2H,Dormant 22H
- Touch-2：Controller lndicator Light Red Brighting 4H,Dormant 20H
- Touch-3：Controller lndicator Light Green Brighting 6H,Dormant 18H
- Touch-4：Controller lndicator Light White Brighting 8H,Dormant 16H
- Turn OFF the Christmas lights and timer after the OFF button 。
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>