KINGrinder K0 Iron Grey Hand Coffee Grinder Instruction Manual
- June 15, 2024
- KINGrinder
Table of Contents
KINGrinder K0 Iron Grey Hand Coffee Grinder
WHAT’S IN THE BOX?
-
Grinder
-
Handle
-
PC Lid with black O ring
-
White O ring
-
Brush
HOW TO OPERATE THE GRINDER?
- Take out the receiver. Put the handle on and hold it to prevent rotation.
- Hold the handle, and rotate the spin dials clockwise till tightened Stop when encountering resistance. Do not lock too tightly.
- Rotate the spin dials anti-clockwise to the grinding click numbers. (Please refer to the advised grinding clicks below.)
- Put the receiver on and take the handle out. Put 20-25g coffee beans into the grinder.
- Put the handle on and start to grind.
RECOMMENDED GRINDER SETTINGS
※ONE CIRCLE IS EQUIVALENT TO 40 CLICKS.
| Brewing methods | K0 | K1 | K2 |
|---|---|---|---|
| Turkish coffee | Not recommended | 28~40 clicks | 28~40 clicks |
| Espresso | Not recommended | 40~60 clicks | 40~60 clicks |
| Moka pot AeroPress | 60~80 clicks | 60~80 clicks | 60~80 clicks |
| Pour-Over | 80~100 clicks | 80~100 clicks | 80~100 clicks |
| French Press | 14 0clicks | 140 clicks | 140 clicks |
HOW TO CLEAN THE GRINDER?
- Take out the receiver and put the handle on the grinder.
- Rotate the spin dial anti-clockwise for dismantling the grinder.
- Take out the components in order. The spin dial, the numerical dial, the inner burr, the spring and the bearing cover . ※No need to remove the center shaft.
- Use the air blower and the brush to clean the residue coffee powder.
- Put on the components in order. The bearing cover and the spring. There are two shapes of the bearing cover: flat design and curve design. The curve design shape of the bearing cover facing upward.
- Attach the inner burr and the numerical dial to the rectangle shape of the central shaft to proceed with assembling the grinder.
- Install the spin dial and rotate clockwise to complete the assembly.
PRECAUTIONS
-
The entire grinder should not be washed water. Please use the provided brush or air blower for cleaning.
-
Please do not turn the handle when the scale is at zero or when it’s below 15 clicks , as this could cause damage to the burr.
-
For precision reasons, the exterior burr should not be dismantled.
Do not forcefully disassemble using tools. -
Please refrain from grinding items other than coffee beans. Additionally, do not grind unroasted beans that have not undergone the roasting process.
-
Avoid directly spraying water onto any part of the grinder when operating RDT.
HOW TO ASSEMBLE THE PC LID AND HANDLE?
- Remove the black O ring from the groove of the PC lid.
- Insert the provided white O ring.
- Ensure the white O ring is securely pushed into the groove of the handle for fixation.
- Done.
HOW TO USE IT BY ELECTRIC?
You need to prepare:
-
Electric screwdriver at a 15-25 torque.
-
6.35mm(1/4 inch) Hex Shank.
-
Electric screwdriver at a 15-25 torque. 6.35mm(1/4 inch) Hex Shank.
-
Insert the Hex Shank, grasp the grinder firmly, and gradually power it on. Ensure that the grinding speed is not too fast.
Documents / Resources
|
KINGrinder K0 Iron Grey Hand Coffee
Grinder
[pdf] Instruction Manual
K0, K1, K2, K0 Iron Grey Hand Coffee Grinder, Iron Grey Hand Coffee Grinder,
Grey Hand Coffee Grinder, Hand Coffee Grinder, Coffee Grinder, Grinder
---|---