Jusite JST-RF17A-1 2.4 DC Fan Lamp Controller Instruction Manual
- June 15, 2024
- Jusite
Table of Contents
JST-RF17A-1 2.4 DC Fan Lamp Controller
Instruction Manual
2.4G DC Fan Lamp Controller Specifications
Product Introduction:
This product uses 2.4G wireless digital remote control technology, remote
control one-to-one control, simple and convenient operation, strong anti-
interference ability.
Technical Parameters
Model: 2.4G AC fan light controller
Wall switch sequence:
full light/white light/yellow light
Input voltage: AC100V – 130V 50/60Hz
Output voltage: DC70 – 110V
LED output power: 25-36W
Motor rated power: <25W
Wind speed: 1 — 6 gears
Timing: 1 hour/ 2 hours
Receiving method: RF2.4G
Remote control distance: 8-20 meters
Remote control battery: No. 7 1.5V X2 
Remote control matching code:
Turn on the power and Press and hold the light pairing key within 5 seconds of
the light on, When you hear a beep or a light flashes, the code match is
successful. If you need to match the code a second time, you need to wait 30
seconds before turning on the power and repeat the above operation.
CAUTION:
The electronic switch is not an isolated product and needs to be operated by
professional personnel during installation.
The electronic switch is triggered by the remote control, and the wireless
frequency of the remote control transmitter is 2.4GHz.
APP operation
- Download the APP scan the qr code open the browser- select the version to download http://www.jasonghost.com/appliancesmart/
- Open the APP select a room Click on( ) select “fan light” enter the equipment name (such as fan light) OK
- Click on enter
1. Language (Chinese and English can be selected)
2. Scan (scan the other party’s QR code to share aevice control)
3. My QR code (you can share it with the other party)
4. Room management (room name can be added)
5. Instructions (Choose the second interface fan light, instructions for using various symbols of the device)
6. Check for updates
7. Feed back point to enter
APP button function description:
- Code matching button (click this button within 5 seconds of turning on the light, such as the light source flashing or the buzzer “di”, it proves that the pairing code is successful; if the pairing code fails, repeat this operation).
- After clicking, you can choose a time to turn off the device regularly.
- After clicking, the wind blown by the fan is like the wind in nature.
- The wind blown by the fan after clicking is suitable for sleep.
- After clicking, the fan will rotate in the reverse direction.
- Click to change the direction of the wind.
- After clicking, the fan will rotate forward.
- After clicking, the white light and yellow light will light up at the same time, but the brightness is only 10% of the maximum brightness.
- After clicking, the white light and yellow light will light up at the same time, and the brightness is the maximum brightness.
- After clicking, only the yellow light will light up, and the brightness is the maximum brightness.
- After clicking, only the white light will light up, and the brightness is the maximum brightness.
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Warning:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’ s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna. Increase the separation between
the equipment and receiver. Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>