Jusite JST-RF20A-1 2.4G DC Fan Controller Instructions
- June 16, 2024
- Jusite
Table of Contents
Jusite JST-RF20A-1 2.4G DC Fan Controller
Specifications
- Compliance: Part 15 of the FCC Rules
- Interference: This device may not cause harmful interference
- Acceptance: This device must accept any interference received
- RF Exposure: The device meets general RF exposure requirements
- Usage: Portable exposure condition without restriction
FCC Statement
This device complies with Part 15 of the FCC Rules. It is designed to
operate without causing harmful interference and must accept any interference
received, including interference that may cause undesired operation.
Warning
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. If you have any concerns or need assistance, consult the dealer or
an experienced radio/TV technician.
RF Warning Statement
The device has been evaluated to meet general RF exposure requirements. It
is safe to use in portable exposure conditions without any restrictions.
Note
Please ensure you follow all safety guidelines and recommendations provided
in the user manual to minimize any potential risks associated with RF
exposure.
2.4G DC Fan Lamp Controller Specifications
Product Introduction
This product uses 2.4G wireless digital remote control technology, remote
control one-to-one control, simple and convenient operation, strong anti-
interference ability.
Technical Parameters
- Model: 2.4G AC fan light controller Wall switch sequence:
- full light/white light/yellow light Input voltage:
- AC 1 00V – 130V 50/60Hz Output voltage: DC70 – 11 0V LED
- output power: 25-36W Motor rated power: <25W
- Wind speed: 1 – 6 gears
- Timing: 2 hour / 4 hours / 8 hours
- Receiving method: RF2.4G
- Remote control distance: 8-20 meters
- Remote control battery: No. 7 1.5V X2
- Remote control matching code:
Turn on the power and Press and hold the light pairing key within 5 seconds of the light on,When you hear a beep or a light flashes, the code match is successful. If you need to match the code a second time, you need to wait 30 seconds before turning on the power and repeat the above operation.
CAUTION
The electronic switch is not an isolated product and needs to be operated by
professional personnel during installation.
The electronic switch is triggered by the remote control, and the wireless
frequency of the remote control transmitter is 2.4GHz.
APP operation
-
Download the APP scan the QR codepen Enjoy home the browser select the version to download
-
Open the APP select a room-Click on(B select 11 fan light” enter the equipment name (such as fan light)-OK
-
Click on et enter
-
Language (Chinese and English can be selected) d
-
Secvainc e(s can’t role) other party QR code to share
-
My QR code (you can share it with the other party)
-
Room management (room name can be added) Instructions (Choose the second interface fan light,
-
instructions for using various symbols of the device)
-
Check for updates
-
Feedbackpoint to enter
APP button function description
- Code matching button (click this button within 5 seconds of turning on the light, such as the light source flashing or the buzzer 11it proves that the pairing code is successful;if the pairing code fails, repeat this operation).
- After clicking, you can choose a time to turn off the device regularly.
- After clicking, the wind blown by the fan is like the wind in nature.
- The wind blown by the fan after clicking is suitable for sleep.
- After clicking, the fan will rotate in the reverse direction
- Click to change the direction of the wind.
- After clicking, the fan will rotate forward.
- After clicking, the white light and yellow light will light up at the same time, but the brightness is only 10% of the maximum brightness.
- After clicking, the white light and yellow light will light up at the same time, and the brightness is the maximum brightness.
- After clicking, only the yellow light will light up, and the brightness is the maximum brightness
- After clicking, only the white light will light up, and the brightness is the maximum brightness..
FCC STATEMENT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>