CLXEAST 58405 24 Inch Large Moving Gear Wall Clock User Guide

CLXEAST 58405 24 Inch Large Moving Ger Wall Clock

Product Information

The clock is a wall clock that requires AA batteries to operate. It has a clock board with hour and minute hands, a frame, and a set of metal thread springs. The clock board is held in place by screws and a gold nut.

Specifications

• Battery Type: AA
• Number of Metal Springs : 6
• Number of Screw s: 5

Product Usage Instructions

Disassemble the Clock

Take the clock board off by removing the 6 metal thread springs from the back side. Press from one side of the metal spring to remove all the springs.

1. 1. Turn the clock board around to the front.

2. Unscrew the gold nut counterclockwise using a pair of pliers to take off the hands.
3. Turn the clock board around to the back.
4. Unscrew the 5 screws to detach the clock board from the frame.
5. Move the hook under the number 60 and then screw the 5 screws back in.

Reassemble the Clock

1. Assemble the hands
   • Align the hands to 12 o’clock.
   • Insert the hour hand into the shaft.
   • Insert the minute hand and screw the nut cap back on.
   • Ensure both hands are parallel.
   • Turn the longer minute hand two full cycles to make sure the hands are not touching each other.
   • Note: The short hour hand should be pressed tightly, but theminute hand should be loose before screwing the cap nut.
2. Test the hands and gears by inserting AA batteries before final assembly.
3. Put all the metal springs into the back of the frame. Complete the assembly.

       FAQ

• Q: How do I remove the clock board?
  • A: To remove the clock board, press from one side of the metal spring to take all the springs out from the back side.
• Q: How do I assemble the hands?
  • A: Align the hands to 12 o’clock, insert the hour hand into the shaft, then insert the minute hand and screw the nut cap back on. Make sure both hands are parallel and turn the longer minute hand two full cycles to ensure they are not touching each other.
• Q: What should I do before final assembly?
  • A: Before final assembly, insert AA batteries to test the hands and gears. Thank you for reading these instructions. If you have any other questions, kindly contact us through Amazon.

Instruction of Disassemble & Reassemble the Clock

Step1
Take the clock board off. We need to take out the 6pcs metal thread spring from the back side. Please press from one side of the metal spring to take all springs out.

Step 2:

1. Take the CLOCK BOARD out from frame then turn around to the front, unscrew the GOLD NUT (in CCW) by a pair of pliers, then we can take off the hands.

2. Turn around the board to the back, unscrew 5pcs screws.

3. Move the Hook under the number 60, then screw the 5pcs screws back.

Tips : Short hour hand should be pressed tightly, but minute hand is loose before we screwing the Cap Nut;

Step 3
Assemble hands. Aligning to 12 O‘clock, insert hour hand into the shaft, then insert minute hand and screw nut cap back. Keep both hands parallel and turn the longer minute hand two full cycles to ensure the hands are not touching each other.
Tips: Short hour hand should be pressed tightly, but the minute hand is loose before we screw the Cap Nut;

Step 4
Put AA batteries to test hands and gears before assembling. Put all the metal springs into the back of the frame and assemble completed.

Thanks so much for reading this instruction.

Kindly contact us through Amazon if you have any other questions.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>