CLXEAST M22058 Oversized Large Moving Gears Wall Clock User Guide

CLXEAST M22058 Oversized Large Moving Gears Wall Clock

Product Information

This product is a clock that requires disassembly and reassembly for various purposes such as battery replacement or repair. It features a metal spring mechanism and comes with a gold cap nut for securing the clock hands.

Specifications:

• Power Source: AA batteries
• Material: Metal
• Color: [Specify the color, if available]

Product Usage Instructions

Step 1: Disassembling

1. Locate the backside of the clock and identify the 6 metal thread springs.
2. Press from one side of the metal spring to release and remove all 6 springs.

Step 2: Removing the Clock Hands

1. Using your fingers or a pair of pliers, unscrew the gold cap nut in a counterclockwise direction (CCW).
2. Carefully lift and wriggle the clock hands’ round metal area near the shaft to remove both the minute hand and hour hand.
3. Once the nut and hands are removed, set them aside.

Step 3: Reassembling the Clock Hands

1. Align the clock hands to the noon position.
2. Insert the hour hand into the shaft, applying slight pressure to fit it securely.
3. Insert the minute hand and screw the nut cap back on.
4. Ensure that both hands are parallel and turn them two full cycles to ensure they are not touching each other.
5. Note: The hour hand should be pressed tightly, but the minute hand should be loose before screwing the cap nut.

Step 4: Testing and Assembling

1. Before assembling the clock, insert AA batteries to test the movement of the hands and gears.
2. If the test is successful, put the 6 metal springs back into the back of the frame.
3. Complete the assembly by securing the springs in place.

Thank you for reading these instructions. If you have any other questions or need further assistance, please contact us through Amazon.

FAQ (Frequently Asked Questions)

• Q: How do I remove the clock hands without damaging them?
  A: To remove the clock hands without causing damage, lift and wriggle the round metal area near the shaft while applying gentle pressure. This will help release the hands smoothly.

• Q: Can I use any type of battery for this clock?
  A: This clock requires AA batteries for proper operation. Ensure you use fresh, high-quality AA batteries for optimal performance.

• Q: How do I ensure that the clock hands are correctly aligned?
  A: Aligning the clock hands to the noon position is crucial. Take your time to position them accurately to ensure proper timekeeping. You can adjust their alignment by carefully lifting and repositioning them if necessary.

Instruction of Disassemble & Reassemble the Clock

1. Step 1: We can see there are 6 pieces metal thread spring from the back side. Please press from one side of the metal spring to take all 6 spring out.

2. Step 2: Unscrew the GOLD CAP NUT (CCW/counterclockwise direction) by our fingers or a pair of pliers. Carefully remove the minute hand and hour hand by lifting and wriggling the clock hand’s round metal area near shaft. Now we take off the nut and hands.

3. Step 3: Aligning to noon, insert hour hand into shaft (slightly press the middle to fit the shaft), then insert minute hand and screw nut cap back. Keep both hands parallel and turn two full cycles to ensure the hands are not touching each other.
   Tips: The hour hand should be pressed tightly, but minute hand is loose before we screwing the Cap Nut;

4. Step 4: Put AA batteries to test hands and gears before assembling. Put the 6 metal spring into the back of the frame and assembling completed.

Thanks so much for reading this instruction. Kindly contact us through Amazon if you have any other questions.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>